valk
Full Member
Posts: 112
|
Post by valk on Mar 25, 2020 19:23:40 GMT
Hi all, I recently installed a highline reverse camera, but now I miss the pdc on my screen. Does anyone know how I should code that? The buttons one the side to adjust the colours, brightness also dont work. Thanks in advance! Valk
|
|
|
Post by vwjap on Mar 25, 2020 23:25:34 GMT
That’s the low line programming(I personally like it better than the high line as camera switches off as soon as you take it out of reverse, whereas highline turns off about 10kmh) but programming for highline is
Go into 5F adaptions Car_Function_List_BAP_Gen2: VPS_0x0B: activated VPS_0x0B_msg_bus: Comfort data bus
Then depending on what buttons you have missing go into 6c-long coding correspondence_HMI_RV_mode_1 correspondence_HMI_RV_mode_2 correspondence_HMI_RV_mode_3 correspondence_HMI_RV_mode_5 4 and 6 give you function not available
With this you can set the different camera angles
dunno if that would sort out your colour and brightness issues though
|
|
|
Post by vwjap on Mar 25, 2020 23:31:17 GMT
Picture of the camera options (on the right of the screen) Also the darkness of the camera could be to do with your reversing lights (mine are 7.5 LED which are pretty bright)
|
|
valk
Full Member
Posts: 112
|
Post by valk on Mar 26, 2020 7:41:50 GMT
That’s the low line programming(I personally like it better than the high line as camera switches off as soon as you take it out of reverse, whereas highline turns off about 10kmh) but programming for highline is Go into 5F adaptions Car_Function_List_BAP_Gen2: VPS_0x0B: activated VPS_0x0B_msg_bus: Comfort data bus Then depending on what buttons you have missing go into 6c-long coding correspondence_HMI_RV_mode_1 correspondence_HMI_RV_mode_2 correspondence_HMI_RV_mode_3 correspondence_HMI_RV_mode_5 4 and 6 give you function not available With this you can set the different camera angles dunno if that would sort out your colour and brightness issues though This is exactly how I coded! It still is not working as you show in your picture. Can it the problen be that there are restrictions in the options in the radio navi itself? (Sorry, English is not my first language)
|
|
|
Post by vwjap on Mar 26, 2020 9:02:45 GMT
Well the last 4 lines are in the camera itself so that should send straight to the 5f sI strange the buttons arnt there, here’s my camera coding (maybe check the long coding against yours? Also you don’t say what year your car is and if you have a MIB 1, 2, 2.5 or if it’s original equipment
Backup name: rear cam Long coding: 0173000161002001000048 Adaptations: Activating and deactivating all development messages: Not activated Actuator, PWM signal: 100 % Brightness: 50 % Control module switch-off, switch-off time: Control module: 20 min Data bus: 30 min Image contrast: 50 % Wheel/tire description: 1950 mm camera_off: 35.00 km/h camera_on: 30.00 km/h color: 50 % debounce_time_for_reverse_gear: 0 ms display_position: 0 px engine_restart_timer: 0 ms Frequency_Swinging_Logo: 100 Hz FSG_control_state: On grafic_element_setting: setting_1_HMI_mode: ff setting_1_pallet_ID: 255 setting_1_color_value: ffff setting_2_HMI_mode: ff setting_2_pallet_ID: 255 setting_2_color_value: ffff setting_3_HMI_mode: ff setting_3_pallet_ID: 255 setting_3_color_value: ffff setting_4_HMI_mode: ff setting_4_pallet_ID: 255 setting_4_color_value: ffff setting_5_HMI_mode: ff setting_5_pallet_ID: 255 setting_5_color_value: ffff setting_6_HMI_mode: ff setting_6_pallet_ID: 255 setting_6_color_value: ffff setting_7_HMI_mode: ff setting_7_pallet_ID: 255 setting_7_color_value: ffff setting_8_HMI_mode: ff setting_8_pallet_ID: 255 setting_8_color_value: ffff setting_9_HMI_mode: ff setting_9_pallet_ID: 255 setting_9_color_value: ffff setting_10_HMI_mode: ff setting_10_pallet_ID: 255 setting_10_color_value: ffff setting_11_HMI_mode: ff setting_11_pallet_ID: 255 setting_11_color_value: ffff setting_12_HMI_mode: ff setting_12_pallet_ID: 255 setting_12_color_value: ffff setting_13_HMI_mode: ff setting_13_pallet_ID: 255 setting_13_color_value: ffff setting_14_HMI_mode: ff setting_14_pallet_ID: 255 setting_14_color_value: ffff setting_15_HMI_mode: ff setting_15_pallet_ID: 255 setting_15_color_value: ffff setting_16_HMI_mode: ff setting_16_pallet_ID: 255 setting_16_color_value: ffff setting_17_HMI_mode: ff setting_17_pallet_ID: 255 setting_17_color_value: ffff setting_18_HMI_mode: ff setting_18_pallet_ID: 255 setting_18_color_value: ffff setting_19_HMI_mode: ff setting_19_pallet_ID: 255 setting_19_color_value: ffff setting_20_HMI_mode: ff setting_20_pallet_ID: 255 setting_20_color_value: ffff setting_21_HMI_mode: ff setting_21_pallet_ID: 255 setting_21_color_value: ffff setting_22_HMI_mode: ff setting_22_pallet_ID: 255 setting_22_color_value: ffff setting_23_HMI_mode: ff setting_23_pallet_ID: 255 setting_23_color_value: ffff setting_24_HMI_mode: ff setting_24_pallet_ID: 255 setting_24_color_value: ffff setting_25_HMI_mode: ff setting_25_pallet_ID: 255 setting_25_color_value: ffff setting_26_HMI_mode: ff setting_26_pallet_ID: 255 setting_26_color_value: ffff setting_27_HMI_mode: ff setting_27_pallet_ID: 255 setting_27_color_value: ffff setting_28_HMI_mode: ff setting_28_pallet_ID: 255 setting_28_color_value: ffff setting_29_HMI_mode: ff setting_29_pallet_ID: 255 setting_29_color_value: ffff setting_30_HMI_mode: ff setting_30_pallet_ID: 255 setting_30_color_value: ffff setting_31_HMI_mode: ff setting_31_pallet_ID: 255 setting_31_color_value: ffff setting_32_HMI_mode: ff setting_32_pallet_ID: 255 setting_32_color_value: ffff image_delay_timer: 0.0 s Minimal_time_to_stay_in_bus_sleep_before_ECU_off: 20000 ms rv_dark_off: 10.00 km/h rv_dark_on: 15.00 km/h RV_Last_Mode: 90° parking spot RV_Start_Mode: 90° parking spot Time_to_open_Swinging_Logo: 1200 ms
|
|
valk
Full Member
Posts: 112
|
Post by valk on Mar 26, 2020 9:45:13 GMT
My apologies. The camera is original vw. I believe I have a mib1 discover pro. (2014, so mib1?)
I will compare your coding with mine, thanks!
|
|
|
Post by vwjap on Mar 26, 2020 10:28:25 GMT
Just had a thought while talking to carlco about highline cameras
Now did you have a existing camera and swapped it for a highline? (You did say in your first post you just fitted a highline) How did you swap it, just the camera or did you change the wiring loom? (High line has a different wiring loom)
Where did you connect the wires
You should have a live 12+, earth 12-, video feed black and white and can bus orange/black orange/purple, although other manufacturers (not vw) sometimes change colours
|
|
valk
Full Member
Posts: 112
|
Post by valk on Mar 26, 2020 11:44:27 GMT
|
|
|
Post by vwjap on Mar 26, 2020 11:48:46 GMT
Did you connect the orange/black orange/purple like this?
|
|
valk
Full Member
Posts: 112
|
Post by valk on Mar 26, 2020 12:24:03 GMT
|
|
|
Post by vwjap on Mar 26, 2020 12:39:05 GMT
You tried swapping the wires round like it says? Otherwise you may have a faulty camera
|
|
valk
Full Member
Posts: 112
|
Post by valk on Mar 26, 2020 12:45:36 GMT
The camera works just fine, I just don’t see the odc on my screen when I put the car in reverse.
I will compare our codings and if needed switch the pins. I’ll let you know what the outcome is.
Thanks!
|
|
valk
Full Member
Posts: 112
|
Post by valk on Mar 26, 2020 12:59:18 GMT
The longcoding fron my cam is: 0173000162002017000040 The rest of the coding is the same.
|
|
valk
Full Member
Posts: 112
|
Post by valk on Mar 26, 2020 21:20:29 GMT
Tried your longcoding but than the guidlines completly dissapere. Switching the pins does no good either.
|
|
|
Post by Carolco on Mar 28, 2020 11:27:38 GMT
Hello. I send to Valk a private asking a data from his car. Vwjap have a configuration in his car probably diferent for your car.
|
|
|
Post by vwjap on Mar 28, 2020 11:50:31 GMT
Yeah mines a 7.5 but same rear camera
|
|
|
Post by Carolco on Mar 28, 2020 11:55:53 GMT
I see in internet that the camera may be not compatible with some infotainment. Depend of his serial number.
in YouTube there is a video of Golfwagen with this problem.... see the post coments.
|
|
valk
Full Member
Posts: 112
|
Post by valk on Mar 28, 2020 14:30:45 GMT
Carolco: I answerd your private message. wich YouTube video do mean? I can't find it.
|
|
b3mt1
New Member
Posts: 2
|
Post by b3mt1 on Apr 5, 2020 15:15:51 GMT
Hi, sorry valk for highjacking the topic. I got the camera from same seller and it works fine (got the same instructions and have done everything from instructions ). I have question which version of camera you have? I got this on image link and to be honest resolution is not so good. m.imgur.com/a/De18rfmMy multimedia unit is 3Q0035846
|
|