|
Q5 2020
Feb 29, 2020 12:18:31 GMT
via mobile
Post by johnnybravo on Feb 29, 2020 12:18:31 GMT
Hi guys, im having issues with coding the new Q5 2020 model, with the V1 OBDEleven. Only few of the default codings arw working like the gauge sweep.
When trying to enter the Security Access Code, im getting an error "Something went wrong"
Also when trying to change some of the configurations in "Adaptations", when i press and hold accept, its loading but I dont get the " Coding accepted" message.
Is this vehicle not supported, or I maybe need to upgrade to the new OBDEleven V2 maybe?
Thanks!
|
|
mat
Closed beta tester
S3 Vorsprung 8Y 2023
Posts: 113
|
Post by mat on Feb 29, 2020 17:24:19 GMT
Try opening the bonnet/hood - some of the newer cars have an OBD firewall, and opening the bonnet/hood turns it off.
|
|
|
Post by johnnybravo on Feb 29, 2020 22:02:12 GMT
Thanks Mat! I will give it a go.
|
|
|
Post by johnnybravo on Feb 29, 2020 22:50:25 GMT
mat It Works!! You are a legend, thanks for that!
|
|
amitl
New Member
Posts: 8
|
Q5 2020
May 11, 2020 21:15:17 GMT
via mobile
Post by amitl on May 11, 2020 21:15:17 GMT
Hi I'm new to this what mods are available for the a new audi q5
|
|
|
Post by pompom on May 11, 2020 22:17:07 GMT
Hi ! First of all, new answer then new discussion. Do you try to go here : obdeleven.com/en/supported-vehiclesthen select your vehicle, look to the apps available ? So if you look for something not list in the apps section, then also ask for a specific mod in a new tread, maybe there are some of older Q5 that can work by long coding modification... Cheers, Sébastien
|
|
|
Q5 2020
May 25, 2020 21:36:07 GMT
via mobile
Post by reddragonaus on May 25, 2020 21:36:07 GMT
Hi I'm new to this what mods are available for the a new audi q5 Always check the more common vehicles on the shared platform, in this case the VW Tiguan
|
|