|
Post by romeo26222 on Feb 28, 2020 10:32:58 GMT
Hello Everyone I want to ask is it possible to take a backup of adaptation and coding from a module in one car and restore it to another one? thanks in advance
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 28, 2020 11:19:32 GMT
There is no restore facility for adaptation at all. You have to adjust each adaptation up manually.
It is possible to copy and past the long coding string from any backup file.
However be warned all these settings are for a specific car with specific hardware/Software so you need to be very very sure the settings are appropriate for the new car.
|
|
|
Post by romeo26222 on Mar 1, 2020 11:26:20 GMT
There is no restore facility for adaptation at all. You have to adjust each adaptation up manually. It is possible to copy and past the long coding string from any backup file. However be warned all these settings are for a specific car with specific hardware/Software so you need to be very very sure the settings are appropriate for the new car. Thanks for your reply. one other question, are the adaptation channels language in German like VCDS? because that's what keeping me concerned about purchasing this tool.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 1, 2020 12:23:23 GMT
Yes some is in German and some english and a fair amount of Acronyms but you very soon speak and think in German and there are many list's of Acronyms so dont let that put you off.
The other point to recall is that we can share coding with VCDS Community as the labels are the same.
The Long coding has multi language facility but these are maintained by users so you may not have them on all languages
|
|