|
Post by gianry on Feb 23, 2020 18:39:01 GMT
I'd like to understand the effective meaning of the following parameters in the Gateway coding:
FPA Funktion Freilauf FPA Funktion GE FPA Funktion DR BCME Komfort Reichweite MKE Variante EM Leerlauf Spannunsabsenkung EM Ladestromempfehlung EM Batterie Verbauort EM Generator Uebersetzung FPA Funktion KL
thanks
|
|
|
Post by vwjap on Feb 23, 2020 19:43:32 GMT
Bcme= Board Computer with Efficiency Program Mke = Fatigue Recognition FPA = FahrProfilAuswahl (driving profile selection)
|
|
|
Post by gianry on Feb 23, 2020 20:42:14 GMT
Board Computer with Efficiency Program :
which is the function of that parameter ?
|
|
|
Post by vwjap on Feb 23, 2020 21:06:22 GMT
Tells you how many miles you got left in the tank, or mpg, at a guess
|
|
|
Post by gianry on Feb 23, 2020 21:18:55 GMT
I don't think ; I've that function disabled but I can see how many kilometers could be driving ..
|
|
|
Post by newty on Feb 24, 2020 13:18:34 GMT
I'd like to understand the effective meaning of the following parameters in the Gateway coding: FPA Funktion Freilauf Driving Profile Free Clutch / SailingFPA Funktion GE Driving Profile Generator (Rough guess)FPA Funktion DR BCME Komfort Reichweite BCME Comfort Range - shall comfort functions be considered in range calculations (this is mostly interesting for electric cars, where heating and cooling have serious impact on range)MKE Variante Type of fatigue detectionEM Leerlauf Spannunsabsenkung Electric management reduce voltage in engine idleEM Ladestromempfehlung Electric management charge current requestEM Batterie Verbauort EM Battery locationEM Generator Uebersetzung EM Generation transmissionFPA Funktion KL Driving Profile Klimasteuerung / Climate (Rough guess)thanks Just added translations where I could translate or guess. Driving Profile mean that these Systems are coded to get Signals to change their behavior from Driving Profiles. Still, there is swap and paramters in the gateway, restricting the functions you are seeing in the menu. All bcme have either something to do with eco-tipps and comfort controllers, nothing really useful in my eyes. You can easily ignore and disable all efficiency infos if you are not into saving fuel
|
|
|
Post by gianry on Feb 28, 2020 20:49:46 GMT
my gateway has the BCMe value set to Disabled and my MIB unit has enabled.
Which is the right coding ?
thanks
|
|
|
Post by newty on Feb 28, 2020 21:11:58 GMT
There is more than one BCME-Value in the Gateway. BCME is summarizing a lot of function regarding consumption and efficiency. So you are coding in the gateway, which consumers shall affect range and or economical tips (speaking of "close windows when AC on" or "disable heated seats when car is warm"). These are some features incorporated in BCME, but not all.
So having some bcme features disabled is fine.
Disabling BCME in the infotainment - wow, never tried this, probably you will lose the entire driving data tab or see blank pages.
|
|
|
Post by gianry on Feb 28, 2020 21:46:17 GMT
I've the following situation :
LO]_BCmE_Live_Tipp: [VN]_active [LO]_BCmE_Komfort_Verbrauch: [VN]_active [LO]_BCmE_Standheizungsberechnung: [VN]_active [LO]_BCmE_LED_Filter: [VN]_active [LO]_BCmE_Komfort_Reichweite: [VN]_not active
|
|
|
Post by newty on Feb 29, 2020 8:35:26 GMT
I've the following situation : LO]_BCmE_Live_Tipp: [VN]_active [LO]_BCmE_Komfort_Verbrauch: [VN]_active [LO]_BCmE_Standheizungsberechnung: [VN]_active [LO]_BCmE_LED_Filter: [VN]_active [LO]_BCmE_Komfort_Reichweite: [VN]_not active Yes. Mine looks the same. Coding says: Give live tipps. Show comfort consumption, but not use comfort consumption to decrease range calculation. Consider fuel consumption from parking heater (if installed) Don't know about the led filter. As said before, bcme has a lot of functions, looks fine
|
|
|
Post by gianry on Mar 8, 2020 11:51:58 GMT
I need to know the meaning of another paramter : Byte 24 VZA in module 5F
thanks
|
|
|
Post by newty on Mar 8, 2020 13:21:28 GMT
Easy: Verkehrszeichenanzeige. traffic sign display. this bit controls the display of traffic signs in the infotainment screen. can also be user set in the map options.
will show the traffic sign stored in the map when there is no traffic sign recognition. if there is traffic sign recognition installed, this will mirror the sign(s) in the dashboard.
|
|