|
Post by paulovw on May 5, 2024 8:52:34 GMT
Hi all,
I just want to give my feedback as I had the same problem changing my diesel filter.
I filled the new filter with diesel and after priming the system a couple of times it still didn’t start.
Used OBDeleven to transfer full pump and tested relay for the full pressure rail. Still noting and I was running out of battery.
One last effort was to open the first injector ( 17 spanner ) and crank until diesel was running out of the top. Closed and started immediately. This took about 5 seconds and the problem was solved.
Hope this helps the next guy 😉
|
|
|
Post by mikinho on Oct 15, 2024 8:09:21 GMT
Hi all, I just want to give my feedback as I had the same problem changing my diesel filter. I filled the new filter with diesel and after priming the system a couple of times it still didn’t start. Used OBDeleven to transfer full pump and tested relay for the full pressure rail. Still noting and I was running out of battery. One last effort was to open the first injector ( 17 spanner ) and crank until diesel was running out of the top. Closed and started immediately. This took about 5 seconds and the problem was solved. Hope this helps the next guy 😉 Man, you saved my life, thanks a lot for the tip !
|
|