|
Post by gianry on Feb 8, 2020 7:46:01 GMT
Hi, I've bought an used Mib2 unit and the car it was fitted had the double usb input. Now I've only one USB. In the media page I've now two usb input . Which is the coding or adaptation to do to delete one usb input ?
thanks
|
|
|
Post by vwjap on Feb 8, 2020 9:40:54 GMT
Long coding usb1 and usb2? Dunno if it’s what you want but I’ve seen it there
|
|
|
Post by vwjap on Feb 8, 2020 15:03:59 GMT
Don’t need my permission dude 👍🏻 Although I did turn usb1 off once and it didn’t charge after that
|
|
|
Post by gianry on Feb 8, 2020 18:59:49 GMT
Thanks a lot , I’ll try to change the parameters soon and try
|
|
|
Post by vwjap on Feb 8, 2020 19:19:54 GMT
Hmmm, Mineonly has connection 1 activated but I have SD1 &2 so I wonder if you could have 4 USB’s fitted to the car (or maybe MIB 2.5 is different) and I wouldn’t have thought the SD’s were external as there in the dvd box
|
|
|
Post by vwjap on Feb 9, 2020 23:18:24 GMT
Yep mines the same but like I said I only have external 1 activated, so presuming sd is not classed as external dude
|
|
|
Post by gianry on Feb 24, 2020 20:42:03 GMT
Iì've just verified nay unit coding about external usb.....
Now it is :
[LN] Interface_1. ACTIVATED [LN] Interface_2. ACTIVATED [LN] Interface_3. NOT ACTIVATED [LN] Interface_4. NOT ACTIVATED
It is necessary set not activated at interface 2
|
|