|
|
Post by vaidas on Feb 5, 2020 9:39:09 GMT
Hello all, I did factory reset in brake module on my Seat Leon FR 2.0tdi 2016 And now coding is gone  Would anyone have any codings or any help would be appreciated please  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 5, 2020 13:06:28 GMT
have you got any backups of the brake setup.
Update.
Its in Spanish but not hare to work out the detail.
|
|
|
|
Post by vaidas on Feb 5, 2020 13:57:21 GMT
have you got any backups of the brake setup.
Update.
Its in Spanish but not hare to work out the detail.
Hi Tester, Thank you for your reply, unfortunately i don't have any back ups Didn't know i can make one till now tbh  Thanks for a link, i will have a look |
|
|
|
Post by vaidas on Feb 5, 2020 15:15:29 GMT
I found some codes and wanted try, but for some reason brake controller wont let me to code it When i go to security access i enter 20103/40168 codes and they are accepted, but when i go to long coding tick Bit1 and hold green button, it keeps asking for security access code and none of them good in the list that coming up. Anyone has any ideas? |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 5, 2020 21:14:04 GMT
the codes I have are: 11966, 25004, 25757, 40168, 20103 the full list according to OBD11 can be found by looking at control unit 03 then select Security access and it will show you all the recorded ones I would also remind you that if you enter to many incorect codes then the security will lock down the control unit for a period of time, afraid I cant recall how long and if its just time or time after driving the car. Last point you are talking about adding in bit, you know you can copy the whole string in one go check out here if not forum.obdeleven.com/post/8922 |
|
|
|
Post by vaidas on Feb 6, 2020 11:12:52 GMT
the codes I have are: 11966, 25004, 25757, 40168, 20103 the full list according to OBD11 can be found by looking at control unit 03 then select Security access and it will show you all the recorded ones I would also remind you that if you enter to many incorect codes then the security will lock down the control unit for a period of time, afraid I cant recall how long and if its just time or time after driving the car. Last point you are talking about adding in bit, you know you can copy the whole string in one go check out here if not forum.obdeleven.com/post/8922Hi, yeah i tried all those codes, but still wont let me to code, i can code other modules, but not brake module. I have VCDS on laptap, i will try that at lunchtime see if it lets me do coding. Thanks |
|
|
|
Post by vaidas on Feb 6, 2020 11:19:30 GMT
Also, what diagnostic mode should i use?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 6, 2020 13:33:27 GMT
By default I would expect to use VW - diagnostic mode, otherwise it would be Diagnosis mode for safety-related systems but I have never done a recode just updates.
Just found an old coding list of mine that shows a few more codes
20103,40168,40304,25004,11966,15081,24990,37202,31857,24435,10815,11122,14108,14451,25377,25757,32304,33776,33777,37201,37203,37483,33799,01138,01295,
01972,02168,75202,75201,74999,27971,02537,02727,02817,02852,02919,03431,03499,04205,04286,04490,04538,04814,05008,05869,06723,07483,09102,09318,09854
|
|
|
|
Post by vaidas on Feb 6, 2020 14:01:57 GMT
YES YES YES I got sorted Started up my old laptop and checked VCDS folder and found my autoscan from last year All the coding there from all modules Also used vcds to code and worked Thanks for help Tester |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 6, 2020 14:32:42 GMT
good news glad its sorted and I have aksed for the factory reset to be removed or made very difficult to use.
|
|
