|
Post by bigtamski on Jan 25, 2020 21:54:27 GMT
Hello all,
New to this...
I just got mine a few hours ago and have scanned my Audi A6 AllRoad - as I have the ACC and Brake Assist not available error.
I see from various forums that ask for VCDS/VAGCOM output, it is possible to get the whole thing in txt format. I can see the ACC error, but I need to see if the door locks and/or the GPS fin/input is throwing any errors as the ACC one is U111300 - Function limitation due to received malfunction value Intermittent.
Any help here gratefully received, as I don't want to go through each module manually checking and emailing them on...
Thanks T
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 25, 2020 22:51:35 GMT
What information do you want to email. If you want to do a full backup of your car then you can do that and email that to yourself easily If you want to email the scan output you can do that easily If you want to do a backup of a single control unit you can do that but its not as easy as the above two. I have done a quick guide here that hopefully will explain how.
But please be aware the VCDS Format is very different to obd11 (data is the same but format is different)
|
|
|
Post by bigtamski on Jan 26, 2020 10:25:29 GMT
Thanks! It's all the info from the system scan. I'll go and try it now. I must have missed the icon to send.
I'll have some more coffee and try it.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 26, 2020 11:22:30 GMT
bigtamski one other thing under the settings tab go to Scan settings and make sure the Freeze Frame data is set to Include
update Also all the errors that are detected as part of the scan are stored in history, by default these are hidden from view but if you want to see them its very easy to show and then email.
|
|