Hi guys i tried to code auto windows closing when ignition off but dosent work I checked few guids and activated everything that i should and still dosen't work Do any of you know any solutions or my comfort module need to be replaced?? Regards
"No I meant on the windows with auto check they wind up/down automatically (not holding your finger on the button on the door) if it doesn’t then recalibrate that window"
Yes they do go up/down on single press but since i got this car at times i have to hold to up/down but that's happening every now and then but anyway if i need calibration how shall i do it?? same like with convenience opening/closing all way down till click and all way up??
No problems, don’t mean to be rude but do you know how comfort windows work? As in you have to press and hold the lock/unlock for it to work i don’t think there is a auto close when ignition off mod, but there is windows operate (as in still work) when ignition off mod,
Its ok and do know how convenience open/close work you have to hold lock/unlock to close open windows but i got this in standard and i re calibrated them last week when you asked about and when i received in monday my next gen i done some apps and some coding and i look briefly trough things and i tried to activate auto close windows/sunroof on ignition off you know wot i mean I done all this changes in adaptation control access 2 and no work you understand me now i don't know i didn't activate something or my BCM is SE no fully loaded one thats why i post BCM number you understand me Thank you again and sorry again for bad explanation Look am freshy to car coding obdeleven vcds and all that but i read a lot and i know something about computers and i "know wot am doing" if i dont i dont touch you know wot i mean
christ1952: Bonjours Je cherche la modification suivante : Feux de jour avec feux de stationnement sans l’ éclairage de la plaque
Mar 19, 2020 20:56:31 GMT
Prosad: Anyone know how to do coding on mk4 01m transmission not taking coding just loads is there a security access code needed(none available) also tried multiple times key cycle and resetting app
Mar 19, 2020 21:37:45 GMT
wanago: Hi is there anyway to code Autohold to be on by default? I have no option in the MFD to enable this by default. I have to manually enable it with the button next to the shifter each time I drive. Is that possible? '09 R36
Mar 20, 2020 0:23:36 GMT
dv52 (Australia): wanago: try this- go to Adaptations in the hex03 module and search for "AUTO HOLD" - then select AUTO HOLD functional status - change the value to "last setting". I hope you don't get asked for a security code because there are lots to choose from!
Mar 21, 2020 6:47:38 GMT
throttlejockey: Hey Guys Brand New Member here...
Mar 21, 2020 11:45:56 GMT
bndo: Hi, when I connected my OBD device to my new tiguan, I was asked to select the year in which it was made. The car itself was a 2017 Rline which caused me to select the years 2015-2017 instead of 2017-. Is there any easy way to change this.
Mar 22, 2020 13:23:51 GMT
testeronline: bndo you need to contact support via the in app help function, this is not something you can change as far as i am aware.
Mar 22, 2020 13:34:17 GMT
bndo: I contacted them, just need to wait until sometime tomorrow when they will reply.
Mar 22, 2020 21:03:10 GMT
IbifaHo: Nee, gaat op uw achterlichten niet werken. Jij hebt de gewone achterlichten.
Mar 23, 2020 8:03:20 GMT
napki: Brakuje najprostszej informacji - backup można wykonać tylko w trybie aktywnego połączenia z samochodem
Mar 23, 2020 23:17:22 GMT
wanago: dv52 (Australia): Thanks very much - I will give this a go when my adaptor arrives tomorrow. Thank you!
Mar 24, 2020 8:52:48 GMT
Anto578: i can't reset appa password, when click on reset i don't receive the email
Mar 24, 2020 15:07:33 GMT