Post by victorcarlotto on Dec 1, 2019 16:23:41 GMT
Hello,
I have a 2018 TT 2.0 TFSI (230PS) Quattro, Matrix Headlights, Lane assist..
I did some coding using OBDEleven, to enable the traffic sign recognition, and it is working perfectly. The modules I updated were 5A (Front Sensors Driver Assistance System), 5F (information control unit) and 17 (Dash Board)...
Other than this, I only ran the App on OBD Eleven to change the Confort Blinkers from 3 to 5 blinks, which also worked perfectly.
After doing that, I noticed my mirrors were not folding when I locked the car... So I went into module 09 (Central Electrics), adaptation, and turn this ON again, and it started working again.
But now, when I go into the "Info" tab in the module 09 (Central Electric), the line "Long Coding" is all 00 (like this: 00000000000000000000000000).. I am not sure if it was like from the start of if I srewed something. That being said, I have tested almost every electric component in my car (automatic headlights, interior lights, mirrors, light sensor, rain sensor, windshield wipers, windshield cleaner, etc...) and everything seems to be working normally.... I check the "History" for module 09, and all that shows in there was the activation of the folding mirrors that I did to fix it, but nothing related to any long coding change... Could the OBD Eleven "App" I ran for the blinkers have caused this?
Can anyone share the "Long Coding" string for module 09 (Central Electric) for a similar configured TT?
I appreciate the help / opinions.
Thanks!
I have a 2018 TT 2.0 TFSI (230PS) Quattro, Matrix Headlights, Lane assist..
I did some coding using OBDEleven, to enable the traffic sign recognition, and it is working perfectly. The modules I updated were 5A (Front Sensors Driver Assistance System), 5F (information control unit) and 17 (Dash Board)...
Other than this, I only ran the App on OBD Eleven to change the Confort Blinkers from 3 to 5 blinks, which also worked perfectly.
After doing that, I noticed my mirrors were not folding when I locked the car... So I went into module 09 (Central Electrics), adaptation, and turn this ON again, and it started working again.
But now, when I go into the "Info" tab in the module 09 (Central Electric), the line "Long Coding" is all 00 (like this: 00000000000000000000000000).. I am not sure if it was like from the start of if I srewed something. That being said, I have tested almost every electric component in my car (automatic headlights, interior lights, mirrors, light sensor, rain sensor, windshield wipers, windshield cleaner, etc...) and everything seems to be working normally.... I check the "History" for module 09, and all that shows in there was the activation of the folding mirrors that I did to fix it, but nothing related to any long coding change... Could the OBD Eleven "App" I ran for the blinkers have caused this?
Can anyone share the "Long Coding" string for module 09 (Central Electric) for a similar configured TT?
I appreciate the help / opinions.
Thanks!