|
Post by atomantmk on Dec 1, 2019 7:37:39 GMT
Is it possible to disable adaptive headlights and how? I have tried this but didn't work!
Things you will need: A fuse puller and a VCDS or OBDEleven. 1.Turn off your car. (make sure everything is off, you may pull the wrong fuse and cause more errors. BE WARNED) 2.Open the driver side fuse panel between the door and the dashboard. 3.Remove Fuse18 Headlight Electronics Left (5A) 4.Open the passenger side fuse panel 5.Remove Fuse 9 Headlight Electronics Right (5A) 6.Turn on the ignition and leave your engine off, now using your VCDS 7.Go into the Central Electronics 09 and code it for Xenon Only Should be currently a 3, change it to a 2, should be like this (0xx2xxx) 8.Go into Instruments 17 and remove the AFS by subtracting 64 from the first 4 digits I changed (2129XXX) to (2065XXXX) 9.Go into CAN Gateway 19 and remove 55 Headlight range. This can be done in coding or installation list 10.Now turn off your vehicle and pull Fuse 15 Instrument Cluster (10A), wait a couple seconds and reinsert it. 11.Turn on your car, the error should now be gone and the ECU will no longer think AFS system is installed.
|
|
|
Post by pochybel21 on May 28, 2022 15:48:30 GMT
hello I'm new to the forum I have the same problem but my car is Audi Q3 2015 I have an obdeleven, please help
|
|
|
Post by cibaraygir on Sept 14, 2022 14:17:48 GMT
|
|