|
Post by asdman on Nov 15, 2019 9:47:48 GMT
Hello, looking for instructions about dpf regeneration on vw passat b6 2010 2.0 Tdi 103 kW. At some video instructions I saw that after entry the seccurity code we should choose dpf regeneration option at basic setups but there are no option to choose just a numbers of block from 1-254. An official salesman told me that I probably have an old driver version but he did not explain how to do this  Anyone could help me with it? Greetings
|
|
|
Post by martins on Oct 18, 2020 8:59:25 GMT
I have the same problem. Is there a solution for this?
|
|
|
Post by segast on Oct 20, 2020 2:39:04 GMT
When the box comes up asking for a value there is a small arrow down to the right that you press to get a drop-down menu
|
|
|
Post by adiwob on Oct 30, 2020 21:30:42 GMT
Channel 226 for regeneration while standing at basic settings
|
|
|
Post by rbhelle on Apr 1, 2023 13:46:13 GMT
Best is regen when driving. Takes 20min. First, get engine to 70degrees oil temp. Then choose modules-engine-adaption. Scroll down to service regen dpf when driving-press the green "v" and hold until confirmation. A CEL will appear on dashboard. Now take a drive for approx 20min, keep engine above 2000 rpm and speed above 70km/h. Should do it. Also check while driving the dpf temp before and after dpf. Should be above 650-750degrees. After regen done you can check "soot oil ash level."
|
|