|
|
Post by drkustom on Sept 19, 2016 10:47:40 GMT
Hello i have change airSuspension bag right rear. now i have buy a obd eleven to set The ride hight again. But i get fault 01437. Can i Calibration in obd eleven? I have lock on Google bot not find anythingh on this forum. Ross tech have a guide but it dosent work. Please help 😀 exuse my bad englich, i am from sweden. Best regards Rickard
|
|
|
|
Post by D0nk3y on Nov 4, 2016 15:39:43 GMT
Hallo
Ich habe seit kurzem auch OBDEleven.
Ich benötige wie der Post über mir auch unbedingt
Die Codierung für das Luftfahrwerk und die
Niveauregulierung zu kodieren.
Bitte schnell um Hilfe! VCDS Codierung bringt Fehler.
Vielen Dank im Vorraus
|
|
|
|
Post by audiv8 on Apr 23, 2018 16:32:58 GMT
Anyone tried to lower or calibrate the air suspension with obdeleven and succeed?
|
|
|
|
Post by formattedtoast on May 25, 2018 20:27:43 GMT
I have the same problem. After installing all new suspension and compressor, I tried to calibrate it with obdeleven. But it won't accept the new measurements. And now the light is always on and I can only Change the ridehight while driving. It refuses when standing stil.
|
|
|
|
Post by dworld on Sept 26, 2019 6:47:41 GMT
so eny update on this ? can it be don or not?
|
|
|
|
Post by michig86 on Apr 20, 2020 15:40:36 GMT
Hat hier noch keiner das Hochboot mit Obdeleven auf den Boden der Tatsachen geholt?
Ich würde ja gern, wie bei vcp jede Stufe einzeln einstellen wollen.
Ich hoffe wir bekommen hier bald Hilfe.
|
|
|
|
Post by godfroi on Nov 21, 2020 13:58:45 GMT
Suspension calibration issues Adaptation will npt accept new dimensions
|
|
|
|
Post by godfroi on Nov 21, 2020 15:21:41 GMT
Hi All after some more tinkering it worked...calibrated.
So maybe being outside the car helped on level ground
What i think is happening from the Adaptations menu the act of selecting Channel 1 purges the system and reinflates to a predetermined position which takes time the 'wait' has to clear then measurements of all wheel arch to centre are made LF RF LR RR these are then sequentially stored as a mm. Value by holding the green highlighted arrow so channel 1 then 2 then 3 then 4 channel 5 requres a 1....and. Oh such joy when it comes back to life.
|
|
|
|
Post by jareginas on Apr 26, 2023 15:48:28 GMT
Just calibrated my allroad, first atempt was unseccesfull because I was in the car while initiating and when the waiting was over and i had to put in new values and measure I of course opened a door and got out.. my mistake, second try was succesfull - opened a window, shut all doors and calibration we t through.
|
|
