|
Post by poseben on Oct 8, 2019 17:44:44 GMT
Hello.
Does anybody know how disable start stop?Is it possible? In ObdEleven is no aplication,coding or adaption available right now. Thanks
Ales
|
|
|
Post by kakalavaka on Feb 11, 2020 20:48:26 GMT
1. Module 19 – (security code 20103) 2. Adaptation 3. Initial voltage for Start/Stop (OEM = 7,6v) --> Change to 12v 4. Apply changes
|
|
lyate
New Member
Posts: 10
|
Post by lyate on Feb 12, 2020 1:23:01 GMT
In my experience, this did not work. Although the change was accepted, and auto ss abated for a short while, it quickly began functioning again (This on a 2020 Q3 Prestige).
LIY
|
|
|
Post by rick2019a5sportback on Mar 6, 2020 13:05:58 GMT
1. Module 19 – (security code 20103) 2. Adaptation 3. Initial voltage for Start/Stop (OEM = 7,6v) --> Change to 12v 4. Apply changes I got this to work on my 2019 Q3. Make sure you have the hood open while you program it.
|
|
lyate
New Member
Posts: 10
|
Post by lyate on Mar 18, 2020 15:47:59 GMT
Change accepted - but absolutely ineffective on 2020 Audi Q3 Prestige. {Surprised that there would be a different result in what we all belive to be the identical 2019 Q3)!
|
|
|
Post by davedee on Dec 29, 2020 21:41:33 GMT
It’s now detected in hardware, a small 2 pin connector on the battery terminal is used for sensing. Using an external device (Like the ASR valve flap controller) adds stop start memory. Coding the threshold voltage or temperature now has no effect
|
|