|
0.14.3
Sept 17, 2019 17:45:53 GMT
Post by Thirsty on Sept 17, 2019 17:45:53 GMT
v0.14.3
- Fixed startup crashes on Android 4.x devices
|
|
|
0.14.3
Sept 18, 2019 19:10:39 GMT
Post by robroy on Sept 18, 2019 19:10:39 GMT
Hi, I'm facing a problem when sending a full backup..I follow the usual steps but when clicking the "Share" button, the app shows a progress and it does nothing. You can check at the video attached. However it works great with single ecus backups - When pressing the "Share" button opens the email client with a message ready to be sent. Any ideas about it? Thanks in advance. Robroy VID-20190918-WA0012 1.mp4 (999 KB)
|
|
ViĆ
Full Member
Posts: 185
|
0.14.3
Sept 19, 2019 17:39:22 GMT
Post by ViĆ on Sept 19, 2019 17:39:22 GMT
(already mentioned to support via the app) Having same issues as robroy , "share" function not working on 0.14.3, tried both on my phone(Android 7) and tablet (Android 9) so the issue is not with my device. Since I really need that function I have reverted back to 0.12.1 and share function works normally. Also small annoying thing with 0.14.3 it's that searching in adaption it is case sensitive. for example if I only wanna search for adaptions that start with "leuchte" nothing will pop up and I have to type exactly as the app has it written "Leuchte" Would like the case sensitive to be removed or at least a toggle switch in settings to toggle it on or off.
|
|
|
0.14.3
Sept 24, 2019 14:01:32 GMT
Post by sergey307 on Sept 24, 2019 14:01:32 GMT
Previous versions worked with not VAG brands and now there is no any control units for them, previously was control unit 33 (obd2) - tested on the same vehicles (peugeot and citroen)
|
|
tima
New Member
Posts: 1
|
0.14.3
Sept 27, 2019 7:35:43 GMT
Post by tima on Sept 27, 2019 7:35:43 GMT
I have a big problem coding my rain and light sensor in my Passat B6. As soon as I click on the coding in this subsystem the app crashes and I get thrown back to the home screen. So basically I'm unable to code this control unit. My Android Version is 7.1.1
|
|
|
0.14.3
Oct 21, 2019 8:47:55 GMT
Post by octo|opto|koppler on Oct 21, 2019 8:47:55 GMT
Some things I noticed: - Automatically connecting a new car might be depending on how old the ECUs are. I had problems autoconnecting to a 2004 VW Polo 9N as well as to a Skoda Fabia 6Y from 2004. My mother's Skoda Fabia NJ 2019 was detected automatically inluding motor code and stuff like that.
- Entering a login code before adapting or coding is better than entering when being asked for while adapting or coding but the app doesn't save the right login code. Everytime I reconnect to that car I have to re-enter the login codes. I don't know if this the way the app works, but I think it should save login codes.
- I also have that problem that on some adaptions via UDS it says function not available or stuff like that and then I have to enter advanced Information, select all, unselect all and then Adaption works. I think that has been mentioned yet but I wanted to confirm.
- Another thing: on My 2005 Skoda Octavia 1Z Combi, I edited a lot of labels. In adaptions the labels are shown immediately unter the coding field. In some ECUs the Adaption label is shown, in other ECUs there is only "..." and no label. When I click on it I get the pop-up field to up- or downvote the existing captions. When entering own captions, in only one case it showed me the caption immediately, in all other cases the captions are saved but under the coding field is only "...".
- I wouldn't call it a bug, but something I'd like to get in the next update: when creating a full scan of the car it would be great if there are some other ways of sharing are possible than only via E-Mail. Now I have to copy all the Content of the E-Mail, paste it into a word document and save it as a PDF or whatever or paste the clipboard into WhatsApp. A direct share to a lot of apps would be great.
- The app does crash when entering measuring values. I'm not able to get some live data.
|
|
13
New Member
Posts: 24
|
0.14.3
Oct 23, 2019 0:45:05 GMT
Post by 13 on Oct 23, 2019 0:45:05 GMT
(already mentioned to support via the app) Having same issues as robroy , "share" function not working on 0.14.3, tried both on my phone(Android 7) and tablet (Android 9) so the issue is not with my device. Since I really need that function I have reverted back to 0.12.1 and share function works normally. Also small annoying thing with 0.14.3 it's that searching in adaption it is case sensitive. for example if I only wanna search for adaptions that start with "leuchte" nothing will pop up and I have to type exactly as the app has it written "Leuchte" Would like the case sensitive to be removed or at least a toggle switch in settings to toggle it on or off. I have a similar problem, only when it's finished generating the log file, a window pops up asking to choose an application. None of the selections do anything, and both names are cut off. See the screenshot below. I was thinking it was somehow related to using a Kindle Fire, but it looks like other devices are having the same issue. Also had this problem with the previous version of the app. OS: Android 7.1.2 (Fire OS 6.3.1.2) App Version: 0.14.3
|
|
kco
New Member
Posts: 14
|
0.14.3
Oct 23, 2019 21:59:43 GMT
via mobile
Post by kco on Oct 23, 2019 21:59:43 GMT
Working fine on android 4.3
|
|