|
|
Post by florian on Jun 28, 2019 11:47:50 GMT
Hello everyone, I have a big problem, I installed the front camera in my golf 7 I changed the windshield, I coded the camera, I calibrated with OBD 11 and then I l I did again with Odis.If the calibration in static is perfectly fine, but against nothing in dynamics, I drove several hours nothing is triggered, you know what to do is hardened? Or if you know how to trigger it in dynamics? Thank you for answering me, I leave the data of my calibrate
    ![]() 
|
|
|
|
Post by ofektal8 on Jun 28, 2019 12:30:08 GMT
Hey, if you need info about the retrofit of the lane assist camera you can read my thread here: www.golfmk7.com/forums/showthread.php?t=46696&page=21Now to your question, The static calibration offset isnt the real offset, after you perform the static calibration with the VAS6430 Board, you can start the Dynamic calibration proccess, which means you need to go for quite a long ride on the highway, and let the camera calibrate itself for real, then the offset you get on the dynamic calibration is the actual offset. The dynamic calibration offset cannot exceed 2.5 degrees, if it does exceed it then your camera isnt positioned correctly. |
|
|
|
Post by florian on Jun 28, 2019 12:39:27 GMT
Bonjour mon frère, merci pour votre réponse rapide. Pendant ce temps, il y a des choses que je ne comprends pas. Vous dites que je dois rouler sur l'autoroute. J'ai conduit presque 1h30 aujourd'hui à 130 km / h et je n'ai pas obtenu d'étalonnage dans OBD11. n'est toujours pas fait
|
|
|
|
Post by ofektal8 on Jun 28, 2019 12:44:27 GMT
Bonjour mon frère, merci pour votre réponse rapide. Pendant ce temps, il y a des choses que je ne comprends pas. Vous dites que je dois rouler sur l'autoroute. J'ai conduit presque 1h30 aujourd'hui à 130 km / h et je n'ai pas obtenu d'étalonnage dans OBD11. n'est toujours pas fait Hey, are you sure lane assist is active? maybe you did not code it correctly? please post an Scan of your car and i will tell you if its ok. |
|
|
|
Post by florian on Jun 28, 2019 14:28:40 GMT
Bonjour mon frère, merci pour votre réponse rapide. Pendant ce temps, il y a des choses que je ne comprends pas. Vous dites que je dois rouler sur l'autoroute. J'ai conduit presque 1h30 aujourd'hui à 130 km / h et je n'ai pas obtenu d'étalonnage dans OBD11. n'est toujours pas fait Hey, are you sure lane assist is active? maybe you did not code it correctly? please post an Scan of your car and i will tell you if its ok. Hi bro, no I'm not sure I'd like to check that if it could be the cause, you want the scan of which module? and tell me how to do it because I have no error except almost ACC and module 44 but the others 0 |
|
|
|
Post by ofektal8 on Jun 28, 2019 14:34:33 GMT
Hey, are you sure lane assist is active? maybe you did not code it correctly? please post an Scan of your car and i will tell you if its ok. Hi bro, no I'm not sure I'd like to check that if it could be the cause, you want the scan of which module? and tell me how to do it because I have no error except almost ACC and module 44 but the others 0 After connecting to Obdeleven press scan, when the scan is complete press the envelope icon at the top and send it to your email, then send it here on the forum. I Need the scan to know if your coding is right and not for the errors. |
|
|
|
Post by florian on Jun 28, 2019 15:27:32 GMT
Hi bro, no I'm not sure I'd like to check that if it could be the cause, you want the scan of which module? and tell me how to do it because I have no error except almost ACC and module 44 but the others 0 After connecting to Obdeleven press scan, when the scan is complete press the envelope icon at the top and send it to your email, then send it here on the forum. I Need the scan to know if your coding is right and not for the errors. Ok what is your email address? |
|
|
|
Post by ofektal8 on Jun 28, 2019 15:28:39 GMT
After connecting to Obdeleven press scan, when the scan is complete press the envelope icon at the top and send it to your email, then send it here on the forum. I Need the scan to know if your coding is right and not for the errors. Ok what is your email address? Well, that works too. |
|
|
|
Post by florian on Jun 28, 2019 18:15:05 GMT
Ok what is your email address? Well, that works too. ofektal8@gmail.com Bro the mail is gone you should receive it |
|
|
|
Post by ofektal8 on Jun 28, 2019 19:12:31 GMT
Well, that works too. ofektal8@gmail.com Bro the mail is gone you should receive it I Got the mail, Everything looks fine though you have something wrong in the coding but it is not related to lane assist( just so you know) When you go for a ride, can you see the lanes in the dashboard? or the lane assist light?(its the orange light under the screen in the dashboard)? |
|
|
|
Post by florian on Jun 28, 2019 19:36:57 GMT
Bro the mail is gone you should receive it I Got the mail, Everything looks fine though you have something wrong in the coding but it is not related to lane assist( just so you know) When you go for a ride, can you see the lanes in the dashboard? or the lane assist light?(its the orange light under the screen in the dashboard)? the light is orange and as soon as I put the contact there is written default Lane Assist, defect signaling detection while the panels are visible on the meter, and as I go in the 5f and I click on lane assist ' have the error message that says unavailable, do you know what it can come from? why the Dynamic calibration does not want to start is mainly that which blocks, there is no way to force the start? |
|
|
|
Post by ofektal8 on Jun 28, 2019 19:46:52 GMT
I Got the mail, Everything looks fine though you have something wrong in the coding but it is not related to lane assist( just so you know) When you go for a ride, can you see the lanes in the dashboard? or the lane assist light?(its the orange light under the screen in the dashboard)? the light is orange and as soon as I put the contact there is written default Lane Assist, defect signaling detection while the panels are visible on the meter, and as I go in the 5f and I click on lane assist ' have the error message that says unavailable, do you know what it can come from? why the Dynamic calibration does not want to start is mainly that which blocks, there is no way to force the start? Thats weird, can you take a few pictures of the menus of the lane assist? in the dashboard and in 5f? because that happend to me too but only when my camera wasnt calibrated so its either something is wrong with your camera or you didnt code something right in the adaptations. |
|
|
|
Post by florian on Jun 28, 2019 20:14:23 GMT
the light is orange and as soon as I put the contact there is written default Lane Assist, defect signaling detection while the panels are visible on the meter, and as I go in the 5f and I click on lane assist ' have the error message that says unavailable, do you know what it can come from? why the Dynamic calibration does not want to start is mainly that which blocks, there is no way to force the start? Thats weird, can you take a few pictures of the menus of the lane assist? in the dashboard and in 5f? because that happend to me too but only when my camera wasnt calibrated so its either something is wrong with your camera or you didnt code something right in the adaptations. You want a picture of how it appears on the counter and the 5f? you want the adaptation of the 5f module? |
|
|
|
Post by ofektal8 on Jun 29, 2019 8:35:22 GMT
Thats weird, can you take a few pictures of the menus of the lane assist? in the dashboard and in 5f? because that happend to me too but only when my camera wasnt calibrated so its either something is wrong with your camera or you didnt code something right in the adaptations. You want a picture of how it appears on the counter and the 5f? you want the adaptation of the 5f module? Yep |
|
|
|
Post by florian on Jun 29, 2019 10:14:01 GMT
Vous voulez une image de comment il apparaît sur le comptoir et le 5f? vous voulez l'adaptation du module 5f?    
here are the photos |
|
|
|
Post by ofektal8 on Jun 29, 2019 13:20:21 GMT
I See, the problem is most likely in your A5 Module, my car has the old version camera so the coding is different, can you take screenshots of the long coding in your A5 Module? you can do it without connecting to the car, OBDEleven saves it on your phone. |
|
|
|
Post by florian on Jun 29, 2019 13:28:25 GMT
|
|
|
|
Post by ofektal8 on Jun 29, 2019 13:33:47 GMT
Thats only one pic, scroll down and there should be more, its either something is wrong in the A5 Coding or something related to your calibration. |
|
|
|
Post by florian on Jun 29, 2019 13:44:24 GMT
Thats only one pic, scroll down and there should be more, its either something is wrong in the A5 Coding or something related to your calibration. Look above the photos copied above |
|
|
|
Post by ofektal8 on Jun 29, 2019 13:52:04 GMT
Thats only one pic, scroll down and there should be more, its either something is wrong in the A5 Coding or something related to your calibration. Look above the photos copied above Yea i saw. Who coded your A5 Module? i think there are a few wrong stuff there. you do have an error in A5 module and it is the Databus missing message which is what blocks the lane assist from working that error means that for example in my car if i tell the lane assist camera that i have ACC But i didnt tell the ACC That i have the camera it will show databus missing message( basically it means that if you tell one module that something is installed you need to tell all the other relevant modules that it is installed.) |
|
|
|
Post by florian on Jun 29, 2019 14:10:27 GMT
Look above the photos copied above Yea i saw. Who coded your A5 Module? i think there are a few wrong stuff there. you do have an error in A5 module and it is the Databus missing message which is what blocks the lane assist from working that error means that for example in my car if i tell the lane assist camera that i have ACC But i didnt tell the ACC That i have the camera it will show databus missing message( basically it means that if you tell one module that something is installed you need to tell all the other relevant modules that it is installed.) Tell me what's wrong with it and how to correct it? it's me who coded until there is no more error, you want me to code the ACC you'll see the error will go in the module a5, but it will have 10 in the ACC and it will not work anymore, |
|
|
|
Post by ofektal8 on Jun 29, 2019 14:13:30 GMT
Yea i saw. Who coded your A5 Module? i think there are a few wrong stuff there. you do have an error in A5 module and it is the Databus missing message which is what blocks the lane assist from working that error means that for example in my car if i tell the lane assist camera that i have ACC But i didnt tell the ACC That i have the camera it will show databus missing message( basically it means that if you tell one module that something is installed you need to tell all the other relevant modules that it is installed.) Tell me what's wrong with it and how to correct it? it's me who coded until there is no more error, you want me to code the ACC you'll see the error will go in the module a5, but it will have 10 in the ACC and it will not work anymore, You can tell ACC That camera is installed but you probably didnt tell the camera that ACC is installed, thats why you get the error. In the long coding of the A5 Module Press the 01 button at the top right and everything should be easier to understand, if you want you can send me screenshots of that too and i can try to help. Sorry for asking all this pictures but as i said i dont have that camera, I Have the older style camera. |
|
|
|
Post by florian on Jun 29, 2019 15:52:16 GMT
Dis-moi ce qui ne va pas et comment le corriger? c’est moi qui ai codé jusqu’à ce qu’il n’y ait plus d’erreur, vous voulez que je code l’ACC, vous verrez que l’erreur ira dans le module a5, mais il aura 10 dans l’ACC et cela ne fonctionnera plus, |
|
|
|
Post by ofektal8 on Jun 29, 2019 16:08:22 GMT
Vous pouvez dire à ACC que la caméra est installée, mais vous n'avez probablement pas dit à la caméra qu'ACC est installé, c'est pourquoi vous obtenez l'erreur. Dans le long codage du module A5, appuyez sur le bouton 01 en haut à droite et tout devrait être plus facile à comprendre. Si vous le souhaitez, vous pouvez également m'envoyer des captures d'écran et je peux essayer de vous aider. Désolé de demander toutes ces images, mais comme je l’ai dit, je n’ai pas cet appareil photo, j’ai l’appareil photo plus ancien. Ok i saw your pics, im comparing your long coding to a golf r with the same stuff as you have on your car and i saw something you didnt code right, which is in byte 16 The Golf R's value for byte 16 is 94 while yours is 16 try changing the 16 to 94 and see what happens. And Btw, i saw a difference in coding between your cars in byte 13 and 11 and couldnt find that image in your email. could you send them please? i want to make sure thats not anoter error. |
|
|
|
Post by florian on Jun 29, 2019 17:33:55 GMT
Bro, ne vous inquiétez pas de me demander autant de photos, je ferai tout ce qui vous sera nécessaire et aussi longtemps qu'il le faudra pour réussir, ce que je veux vous dire, c'est que, pourtant, à huis clos, j'ai ACC CODED , Je t'ai envoyé toutes les photos par courrier, je voulais les poster ici, mais il y a environ 20 photos, j'ai essayé de te rendre la commande en ordre mais je ne sais pas si dans Gmail tu les recevras dans le bon ordre, normalement je montre vous le module 13 avec 0 erreur, je vous montre que je code la caméra une fois valide, je vous montre les 10 erreurs identiques dans, dans la suite, je vous montre, que l'erreur dans le module a5 disparaît depuis que j'ai indiqué dans le module 13 caméra installée , et alors vous avez tout le long codage que vous vouliez Ok i saw your pics, im comparing your long coding to a golf r with the same stuff as you have on your car and i saw something you didnt code right, which is in byte 16 The Golf R's value for byte 16 is 94 while yours is 16 try changing the 16 to 94 and see what happens. And Btw, i saw a difference in coding between your cars in byte 13 and 11 and couldnt find that image in your email. could you send them please? i want to make sure thats not anoter error. bro I confess I do not understand too much what you tell me to change could you do it with my images? because you know the long coding I usually without the numbers, so I have trouble to find me, I send you the last 2 images that you request by mail |
|
|
|
Post by ofektal8 on Jun 29, 2019 17:40:37 GMT
Ok i saw your pics, im comparing your long coding to a golf r with the same stuff as you have on your car and i saw something you didnt code right, which is in byte 16 The Golf R's value for byte 16 is 94 while yours is 16 try changing the 16 to 94 and see what happens. And Btw, i saw a difference in coding between your cars in byte 13 and 11 and couldnt find that image in your email. could you send them please? i want to make sure thats not anoter error. bro I confess I do not understand too much what you tell me to change could you do it with my images? because you know the long coding I usually without the numbers, so I have trouble to find me, I send you the last 2 images that you request by mail Ok, i found another thing but its not so important. Do like in the picture to byte 16.  |
|
|
|
Post by florian on Jun 29, 2019 19:19:29 GMT
Tell me what you found it must be everything in order tell me everything you find that is not good, do you think it's normal to have the errors on the distance regulator? 10 similar errors it seems amazing to me, and in module 44 I have an error too and I can not make it go I sent you by email the photo I have beautiful uncheck lane assit installed the error remains
|
|
|
|
Post by ofektal8 on Jun 29, 2019 19:45:54 GMT
Did you try what i sent in the previous post? It should let you enable the lane assist in 5F. The errors will stay until everything is coded properly. And do this too.  |
|
|
|
Post by florian on Jun 29, 2019 21:07:54 GMT
Bro, I just came to do what you told me, there is better but there are still some things to see, so by doing what you told me, I lost the mistakes of the module 17, 44, and 76, I have however not lost the errors of module 13 they are still present, and I had errors in the module a5 I send it to you by mail, by cons when I start I I no longer have the default icon Lane Assist, only the detection of road signs I transmit all this to you anyway.
|
|
|
|
Post by florian on Jun 30, 2019 13:47:50 GMT
Hello my friend, since yesterday and the codings that you asked me to change I told you to have no more error on the dashboard by lane to assist, I sent you this by mail, and this morning j I drove 37 km, and the error came back I wanted to activate it from the screen and it appeared the dashboard I do not know what to do lol.
|
|
