I've retrofitted Audi Original PDC optical rear on my car. Everything works fine except that the visual display in the virtual cockpit closes after 10 seconds, even though reverse gear is still in gear and sound is still active from sensors. No error messages in the module. I cannot find any type of setting in any of the control units in the car that seems to fix the issue. It's driving me mad, so close so close...
33catalyst: How does one find the software code for their replacement ECU
Feb 24, 2020 16:11:31 GMT
33catalyst: or if anyone wishes to share the info for a 2005 Audi a6 3.2 quattro - Automatic - I just need the software code to reprogram a replacement ECU - but support is not helpful. Kind regards
Feb 24, 2020 16:27:40 GMT
peysaj: testeronline thank u very much)))))
Feb 24, 2020 18:30:34 GMT
yaseen: i have audi a4 1800 tfsi 170hp
Feb 25, 2020 10:48:51 GMT
yaseen: i have audi a4 1800 tfsi 170hp i want to make software update for my transmission how to do that
Feb 25, 2020 10:55:42 GMT
testeronline: yaseen do you mean firmware update if so there are many threads on here telling you that it cant be done by OBD11 or VCDS. If you want to do a reset then have a look in basic settings and youtube for details of how to.
Feb 25, 2020 17:31:08 GMT
francesco86: THEN I LOOK FOR THE CHANNELS FOR CADDY 2018
Feb 25, 2020 18:06:06 GMT
francesco86: CERCO CODIFICA PER ALZAVETRI CON UN CLICK DAL TELECOMANDO PER GOLF 7 ANNO 2014.
Feb 25, 2020 18:06:10 GMT
even_keel: can i get my obdeleven (bought used) reset? previous owner doesn't remember the 6 digit passcode
Feb 26, 2020 2:31:32 GMT