bakili
Junior Member
Posts: 64
|
Post by bakili on Aug 6, 2016 20:53:20 GMT
Hi I have pro version of app. Wanted to activate refuel quantity in dashboard, when I go into apps, it shows that this option already on. I can't see it on MFD, what am I doing wrong? Thanks
|
|
|
Post by dv52 (Australia) on Aug 6, 2016 22:49:41 GMT
Hi I have pro version of app. Wanted to activate refuel quantity in dashboard, when I go into apps, it shows that this option already on. I can't see it on MFD, what am I doing wrong? Thanks bakili: hello. If you have implemented this tweak and you can't see it on the MFD (if you have tried step VI below), then it's possible that you will need to do the "in-car" procedure, which goes like this:
REFUEL QUANTITY: IN-CAR PROCEDURE
- Press the CAR button on the RHS of the infotainment screen
- Press Setup (looks like a cog symbol) on bottom LHS of screen
- Navigate to Multifunction display and select
- Scroll down the screen and place a tick in the Refuel Quantity box
- Exit all screens
- Use the Up/Down button on the steering wheel to find the refuel screen on the MFD
Don
PS: Please note that the "space" in the fuel tank that this tweak says is empty is notoriously wrong! In my experience, the reading from this tweak always underestimates the refuel quantity by about 5 litres (or about 1 US gallon) - I suspect that the measurement ignores the reserve quantity in the tank! That's why I never use the facility!!
|
|
bakili
Junior Member
Posts: 64
|
Post by bakili on Aug 7, 2016 7:18:19 GMT
Many thanks DV52 I haven't activated tweak with obd11 as it already shows that this option is on. I can't also see refuel quantity in settings as everything what availabile is ticked on
|
|
bakili
Junior Member
Posts: 64
|
Post by bakili on Aug 7, 2016 10:38:30 GMT
Tried again, this time I turned refuel quantity off and back on. Still nothing, doesn't come on car settings up. Cost me 20 credits 😔
|
|
|
Post by dv52 (Australia) on Aug 7, 2016 13:08:19 GMT
Tried again, this time I turned refuel quantity off and back on. Still nothing, doesn't come on car settings up. Cost me 20 credits 😔
Bakii: Don't use any more credits!! Here's how to do the tweak without using credits (save your credits for really complicated tweaks - this is not a complex tweak). You should go through my instructions below and check that the coding for the refuel function has been successfully executed by the App.
Re-Fuel Quantity: OBD11 Instructions - Open OBD11 software and select Dash Board (address hex17)
- Select Coding
- Pull Down the long coding screen until you find Volume to be replenished (it's almost at the end)- select this
- Change setting to Yes
- Exit ODB11 software
- Execute the In-car procedure in my post above
I've included below a diagrammatic version of these instructions
Don
|
|
bakili
Junior Member
Posts: 64
|
Post by bakili on Aug 7, 2016 15:47:00 GMT
Many thanks Don. You are star! Done and it's on now
|
|
|
Post by ari007 on Aug 13, 2016 13:57:40 GMT
Can someone explain this tweak as it does not make any sense to me
I have changed my units so it displays this tweak in litres
From what I understand this is the amount of fuel used since last fill up
But when I refuel should this data be reset to 0 because it doesn't
|
|
ody19
New Member
Posts: 1
|
Post by ody19 on Jan 23, 2020 19:48:06 GMT
Hi everyone.
I own seat leon 1.5 TGI (CNG fuel) 2019 model. I enabled refueling quantity theough obdeleven app. Although on mfd it shows dashes when i scroll to refueling quantity. Can anyone help me? Thanks in advance
|
|
|
Post by dv52 (Australia) on Jan 24, 2020 23:30:38 GMT
^^^ hmm......... "seat leon 1.5 TGI (CNG fuel) 2019 model"? The tweak is intended to measure the space remaining in a "PETROL/DIESEL" tank - I very much doubt that VW or leon intended the facility to also apply to CNG tanks
Don
|
|
|
Post by skodaconvert on Jan 8, 2021 9:29:00 GMT
how do you change the quantity to litres. I have activated the refuel quantity via the App but only get gallons (UK Skoda Kodiaq)
|
|