|
Post by hooper1690 on Nov 30, 2018 20:48:11 GMT
Hi i have standard mk7 golf and have upgraded door panel and door controller and door loom does anyone know what coding is to activate it thanks
|
|
|
Post by ofektal8 on Dec 2, 2018 11:24:53 GMT
Do you mean the strip of colored light near the handle?
|
|
|
Post by alex494 on Dec 2, 2018 22:38:12 GMT
I am also trying to do this retrofit - what pins in the door controller does the LED door handle light and LED strip light go into? my doors modules are highline ones and I have the door cards equipped with the lighting I just need the wires to run from the connectors to the door modules...
|
|
|
Post by ofektal8 on Dec 3, 2018 0:50:17 GMT
I am also trying to do this retrofit - what pins in the door controller does the LED door handle light and LED strip light go into? my doors modules are highline ones and I have the door cards equipped with the lighting I just need the wires to run from the connectors to the door modules... Hey, I Attached a Pic that you can see the wiring of both of them. The blue wire is for the Ambient light strip and the white is for the Door handle light.( And of course they both need a ground Which can be found on pin 5 of the door control module).
|
|
|
Post by hooper1690 on Dec 13, 2018 22:36:54 GMT
Yea it's the door strip as I say I have door loom module and panel just need coding I think
|
|
eli
Full Member
Posts: 129
|
Post by eli on Jul 2, 2020 7:09:31 GMT
Hello people. The interior light on the door handle is not turning on. Does anyone know how to inform the settings to be made in obdeleven?
|
|