Post by lange666 on Jun 30, 2018 11:25:29 GMT
Been playing around a bit this morning and made a little error.
On the Central Electronics module channel 0 it's possible to reset (remove) the keys for remote controlling the doors.
I used this without reading the comment and now, as you might have guessed, the keys don't remotely open or close the doors anymore.
Ignition and the lot still works.
Channel 1 is available to relearn both keys but until now, no success.
I know the procedure with the VCDS, which is quite simple, but I don't have access to VCDS atm.
Anybody any clue on how to do this with OBD2?
On the Central Electronics module channel 0 it's possible to reset (remove) the keys for remote controlling the doors.
I used this without reading the comment and now, as you might have guessed, the keys don't remotely open or close the doors anymore.
Ignition and the lot still works.
Channel 1 is available to relearn both keys but until now, no success.
I know the procedure with the VCDS, which is quite simple, but I don't have access to VCDS atm.
Anybody any clue on how to do this with OBD2?
