|
|
Post by bikebert on Mar 31, 2018 15:31:54 GMT
Remarks: 1. It is highly recommend to make backup before changing anything in control unit. Backup will read all adaptation channels and coding and store it into backup file. Backup file can be accessed in history screen. 2. After use, disconnect [in the App] and/or remove [from the car] the device due to the risk of draining the battery. 3. You perform any of these changes at your own risk. If you aren't sure, don't do it! You can find more info about the device and application here. Tested on: Seat Ibiza Excellence 1.0 TSI 115KM 2018 Disable Start/Stop1. Select Control unit 19 (Gateway) 2. Security access > Access Code: 20103 3. Adaptation 4. Name: Start/stop start voltage limit 5. Change value from 7.6 V to 12 V __________ Park Pilot (Optical Parking System)1. Select Control Unit 76 (Parking Assistance) 2. Security access > Access Code: 71679 3. Long Coding 4. Name: Visual display for park assist 5. Change value to "OPS display" [standard: "not installed"] __________ Pointer test - Needle sweep1. Select Control unit 17 (Dash Board) 2. Long coding 3. Name: Staging 4. Change value to "Yes" [standard: "No"] __________ Fan speed on Auto mode1. Select Control unit 08 (Air Condition) 2. Long Coding 3. Name: Blower display in auto operation 4. Change value to "activated" [standards: "Not activated"] __________ Seat belt warning deactivation1. Select Control unit 17 (Dash Board) 2. Security access > Access Code: 25327 3. Long Coding 4. Name: Seat belt warning 5. Change value to "Off" [standard: "On"] __________
Comfort blink cycleWith this mod, you can change number of flashes of the turn signal 1. Select Control unit 09 (Central Electrics) 2. Security access > Access Code: 31347 3. Adaptation 4. Name: Außenlicht_Blinker 5. Access Control: Komfortblinken Blinkzyklen 6. Change the desired value: max. 5 [standard – 3] 7. [Reset “Lights” to factory settings on the radio] __________ Folding Mirrors (while locking the car)With this mod, mirrors will fold without having to be continually pressing the button on the remote 1. Select Control unit 09 (Central Electrics) 2. Security access > Access Code: 31347 3. Adaptation 4. Name: Spiegelverstellung 5. Access Control: Funk_Spiegelanklappung_Modus 6. Change value to "by_look_command_via_remote_control_key" [standard: "by_convenience_operation_via_remote_control_key"] __________ DLR lights off with hand brake1. Select Control unit 09 (Central Electrics) 2. Security access > Access Code: 31347 3. Adaptation 4. Name: Außenlicht_Front 5. Access Control: Tagfahrlicht_Dauerfahrlicht_bei_Handbremse_abschalten 6. Change value to "active" [standard: not active] __________ to be continued... |
|
|
|
Post by cat3pt on Apr 15, 2018 14:02:01 GMT
Some more that i've done and tested without any problem:
(Tested on Seat Ibiza 6KJ FR 1.0TSI 115cv)
Cronometer in Dashboard (and yes it works very well)
1. Select Control unit 17 (Dashboard)
2. Select Long Coding
3. Name: Lap Counter
4. Change value from no to yes and save.
5. The new Chronometer menu will appear on Dashboard.
Disable AM option in Radio Mode (for GPS 8' Unit)
1. Select Control unit 5F (information control unit)
2. Select Long Coding
3. Name: byte_14_AM_disabler
4. Change value from not_activated to activated
5. The top left corner with Mode swith on Radio will disappear and the radio will be always in FM mode only.
|
|
|
|
Post by sennie on Apr 20, 2018 18:38:51 GMT
Hi,
Does someone have the adaptation for the auto door locking above 15 km/h? Did not find it on the forum for the KJ.
Thanks!
|
|
crow
New Member
Posts: 29
|
Post by crow on Apr 21, 2018 11:58:04 GMT
Hi, Does someone have the adaptation for the auto door locking above 15 km/h? Did not find it on the forum for the KJ. Thanks! You can simply find it on the setting -> locking than you activate it ,no need to use the obd11 |
|
|
|
Post by sennie on Apr 21, 2018 12:51:26 GMT
Hi, Does someone have the adaptation for the auto door locking above 15 km/h? Did not find it on the forum for the KJ. Thanks! You can simply find it on the setting -> locking than you activate it ,no need to use the obd11 The new Ibiza does not have this option.. |
|
|
|
Post by sennie on Apr 21, 2018 14:54:26 GMT
The new Ibiza does not have this option.. I went to my car to check it, in the settings menu opening and closing is that option. That’s strange, on the dutch version the option is not there I checked all menu options. Found an youtube video with the adjustments for a new Polo and that also worked for my Ibiza. Thanks for checking! |
|
|
|
Post by sennie on Jun 18, 2018 17:57:35 GMT
|
|
|
|
Post by juanrarodriguez18 on Aug 28, 2018 21:14:52 GMT
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 29, 2018 12:02:08 GMT
I activated it on my 8 "screen, since it was deactivated, I had a parking sensor but the OPS was not activated, you can always try to activate it. |
|
|
|
Post by skaterpepe on Nov 30, 2018 17:35:37 GMT
good staff.
I want to thank you right away for the list of settings.
I have a problem. I activated this encoding, but when I turned off the lights on the screen, the front DRLs turn off, but the rear DRLs do not! how to solve?
DLR lights off with hand brake
1. Select Control unit 09 (Central Electrics)
2. Security access > Access Code: 31347
3. Adaptation
4. Name: Außenlicht_Front
5. Access Control: Tagfahrlicht_Dauerfahrlicht_bei_Handbremse_abschalten
6. Change value to "active" [standard: not active]
|
|
adem
New Member
Posts: 19
|
Post by adem on Dec 3, 2018 15:28:02 GMT
Hi
I want Adaptation for this options for ibiza 2018
1- Front flashing and LED in phase opposition
2- Rear turn signal in phase opposition
3- Lighthouse call with anti fog
4- lighthouse call and LED in opposition
5- Refill amount
6- Corner light
7- 3rd brake light with rear boot open
8- Free alarm
Thank you
|
|
|
|
Post by stefos7 on Jan 13, 2019 12:59:15 GMT
I activated it on my 8 "screen, since it was deactivated, I had a parking sensor but the OPS was not activated, you can always try to activate it. HI there. I wish to enable Ops but I can't find Control Unit 76 (Parking Assistance) ..Is it located in other menu? Maybe different Control Unit? Thanks in advance |
|
|
|
Post by vova4uma on Mar 26, 2019 1:41:15 GMT
hey guys, i need little help.. when im pressing on "scandinavian drl" its not working, its writing not supported. who's know whats the problem ??
|
|
|
|
Post by ibizakj on May 14, 2019 19:52:55 GMT
hey guys, i need little help.. when im pressing on "scandinavian drl" its not working, its writing not supported. who's know whats the problem ?? Ibiza should have that enabled as standard, at least it's that way for my car |
|
|
|
Post by maxwrt on May 15, 2019 16:29:01 GMT
but the access codes are necessary because I have seen other similar procedures for OBDeleven but do not have an access code. is it possible?
Disable Start / Stop [WORKING]
1. Control Unit 19 (Gateway)
2. Adaptation
3. Start / stop start voltage limit: change the value to "12V" [Standard: "7.6V"]
|
|
twix
Closed beta tester
Posts: 3
|
Post by twix on Aug 11, 2019 16:11:16 GMT
|
|
|
|
Post by ghost45 on Sept 7, 2019 8:21:44 GMT
Here also others full encodings of Seat ibiza 2018/2019 version:
|
|
|
|
Post by william03 on Dec 17, 2019 10:46:05 GMT
do someone of you know the coding for one click and the windows go op ? from the key instead to holding down the lock button ?
|
|
|
|
Post by tarragona1980 on Jan 12, 2020 17:21:23 GMT
how to activate lower left rearview mirror when I put gears with obedelven. I have seate ibiza fr 115 hp 2018
|
|
|
|
Post by ekoumis on Feb 19, 2020 11:15:39 GMT
Good morning.
I have a Seat ibiza 1.6tdi 2020 model.
Because it is a Basic version of the infotainment system (6,5 inches), and in particular the car's Bluetooth function, it misses the SMS reading and notification function. I would like to see if I can turn it on.
Thanks in advance
|
|
|
|
Post by josephtr03 on Mar 31, 2020 13:23:50 GMT
Hello All,
I tried and Tested. Working on Seat 2017 1.0 75 Style
When DRL is open, DRL flashes in opposite direction when signal is runningFor Front DRL 1.Central Electrics 09
2.Security
3.31347 enter code/
Front Left DRL /
4.Adaptation
a.Leuchte 2SL
1.Light_Function_G_2
a.Change value: Blinken links Hellphase (Default :nicht aktiv)
2.Dimming_Direction_GH_2
a.Change value : Minimize (Default : maximize)
Front Right DRL
4.Adaptation
a.Leuchte 3SL
1.Light_Function_G_3
a.Change value : Blinken rechs Hellphase (Default :nicht aktiv)
2.Dimming_Direction_GH_3
a.Change value :Minimize (Default : maximize) Save For Rear Stop DRL Rear left Light
4.Adaptation
a.Leuchte 23SL
1.Light_Function_H_23
a.Change value: Blinken links Hellphase (Default :nicht aktiv)
2.Dimming_Direction_GH_23
a.Change value : Minimize (Default : maximize)
3.Dimming_GH_23
a.Change value: 0 (Defaults: 0)Rear right Light
4.Adaptation
a.Leuchte 24SL
1.Light_Function_H_24
a.Change value: Blinken rechs Hellphase (Default :nicht aktiv)
2.Dimming_Direction_GH_24
a.Change value : Minimize (Default : maximize)
3.Dimming_GH_23
a.Change value: 0 (Default: 0)
Save Enjoy josephtr03
|
|
|
|
Post by luisfl on Apr 14, 2020 16:55:27 GMT
Hi Guys,
Is it possible to have ACC in my MY18 IBIZA FR 115CV DSG? It already has the front radar wich if it senses proximity to something it beeps and ultimatly brakes by it self. My doubt is that I only have the "normal" stoke with function to speed limiter and cruise control.
Any insite?
Thanks
|
|
|
|
Post by otanerist on Dec 9, 2020 19:38:09 GMT
Do you know why in my ibiza xcellence 2020 doesn´t work?
when I activate the turn signal separately it works fine but when I activate the turn signals it does not work
Thanks
|
|
|
|
Post by davidz8855 on Dec 23, 2020 20:21:06 GMT
Hello All,
I tried and Tested. Working on Seat 2017 1.0 75 Style
When DRL is open, DRL flashes in opposite direction when signal is runningFor Front DRL 1.Central Electrics 09
2.Security
3.31347 enter code/
Front Left DRL /
4.Adaptation
a.Leuchte 2SL
1.Light_Function_G_2
a.Change value: Blinken links Hellphase (Default :nicht aktiv)
2.Dimming_Direction_GH_2
a.Change value : Minimize (Default : maximize)
Front Right DRL
4.Adaptation
a.Leuchte 3SL
1.Light_Function_G_3
a.Change value : Blinken rechs Hellphase (Default :nicht aktiv)
2.Dimming_Direction_GH_3
a.Change value :Minimize (Default : maximize) Save For Rear Stop DRL Rear left Light
4.Adaptation
a.Leuchte 23SL
1.Light_Function_H_23
a.Change value: Blinken links Hellphase (Default :nicht aktiv)
2.Dimming_Direction_GH_23
a.Change value : Minimize (Default : maximize)
3.Dimming_GH_23
a.Change value: 0 (Defaults: 0)Rear right Light
4.Adaptation
a.Leuchte 24SL
1.Light_Function_H_24
a.Change value: Blinken rechs Hellphase (Default :nicht aktiv)
2.Dimming_Direction_GH_24
a.Change value : Minimize (Default : maximize)
3.Dimming_GH_23
a.Change value: 0 (Default: 0)
Save Enjoy josephtr03 Can anyone please upload video of this ? what do you mean by front DRL flashes in opposite direction? |
|
|
|
Post by gatos21 on Dec 25, 2020 5:38:20 GMT
Activate sport menu in multimedia ibiza??
|
|
rupra
New Member
Posts: 42
|
Post by rupra on Dec 26, 2020 15:03:40 GMT
Anyone can do activate esc sport/esc off options ?
|
|
|
|
Post by ibizakj on Mar 19, 2021 19:23:05 GMT
Hi Guys, Is it possible to have ACC in my MY18 IBIZA FR 115CV DSG? It already has the front radar wich if it senses proximity to something it beeps and ultimatly brakes by it self. My doubt is that I only have the "normal" stoke with function to speed limiter and cruise control. Any insite? Thanks You need to have sensors in the windshield (lane assist) and VCDS to make that work. |
|
|
|
Post by steffen on May 20, 2021 15:52:34 GMT
Tried and tested to remove ecotrainer menu at infotainment unit:
Remove ecotrainer menu
1. Control Unit 5F (Multimedia)
2. Adaptation
3. Car_Function_Adaptations_Gen2
- menu_display_user_eco_rating
New value : Not activated
Old value : activated
- menu_display_user_eco_rating_over_threshold_high
New value : Not activated
Old value : activated
|
|
|
|
Post by steffen on May 20, 2021 16:31:53 GMT
Tried and tested to have a fade effect on internal instrument lights:
Fade effect (ramp) on instrument lights
1. Central Eletronics 09
2. Adaptation
3. Suchbeleuchtung
KL58 Einschalten mit Rampe
New value : activated
Old value : Not activated
|
|
rupra
New Member
Posts: 42
|
Post by rupra on May 29, 2021 11:55:12 GMT
Hello All,
I tried and Tested. Working on Seat 2017 1.0 75 Style
When DRL is open, DRL flashes in opposite direction when signal is runningFor Front DRL 1.Central Electrics 09
2.Security
3.31347 enter code/
Front Left DRL /
4.Adaptation
a.Leuchte 2SL
1.Light_Function_G_2
a.Change value: Blinken links Hellphase (Default :nicht aktiv)
2.Dimming_Direction_GH_2
a.Change value : Minimize (Default : maximize)
Front Right DRL
4.Adaptation
a.Leuchte 3SL
1.Light_Function_G_3
a.Change value : Blinken rechs Hellphase (Default :nicht aktiv)
2.Dimming_Direction_GH_3
a.Change value :Minimize (Default : maximize) Save For Rear Stop DRL Rear left Light
4.Adaptation
a.Leuchte 23SL
1.Light_Function_H_23
a.Change value: Blinken links Hellphase (Default :nicht aktiv)
2.Dimming_Direction_GH_23
a.Change value : Minimize (Default : maximize)
3.Dimming_GH_23
a.Change value: 0 (Defaults: 0)Rear right Light
4.Adaptation
a.Leuchte 24SL
1.Light_Function_H_24
a.Change value: Blinken rechs Hellphase (Default :nicht aktiv)
2.Dimming_Direction_GH_24
a.Change value : Minimize (Default : maximize)
3.Dimming_GH_23
a.Change value: 0 (Default: 0)
Save Enjoy josephtr03 Can anyone please upload video of this ? what do you mean by front DRL flashes in opposite direction? I did it before it for my car. It's working perfectly(Rear coding) at day but at night's, when low beam's turn on blink's still ok but if you use hazard lights it doesn't work actually. |
|
