|
Post by bagman on Feb 17, 2018 15:13:33 GMT
I would be very grateful if someone could guide me through the steps necessary to active Traffic Sign Assist.
My car is equipped with Lane Assist Camera.
|
|
|
Post by bagman on Mar 24, 2018 18:21:14 GMT
I finally managed to solve it with some help from FPHU Eldar, obdeleven.pl/My car has lane assist, no satnav Traffic Sign Assist Activation1. Control Unit 5F - Information
Adaptation
Car_Function_List_BAP_Gen2 traffic_sign_recognition_0x21 = Activated, then Green tick
Car_Function_Adaptions_Gen2 menu_display_road_sign_identification = Activated, then Green tick
8. Control unit A5 (front / advance camera)
Security access - 20103 Control unit Long Coding
Byte 16
Bit 04 Activate , then Green tick
13. Control unit 17 (Dashboard)
Control unit Long Coding
Byte 5
Bit 02 Activate, then Green tick
|
|
|
Post by softsand on Apr 1, 2018 15:53:34 GMT
Thanks for the details. I would very much like to get this working.
My issues is that I keep getting the message "Something went wrong, try again" in red.
I've been able to recode other modules without issue -gauge sweeps, memory on heat/cooled seats etc.
Can you offer any suggestions ? - ignition is on...
Thanks again.
|
|
|
Post by softsand on Apr 4, 2018 15:15:45 GMT
All good - restarted tablet etc and seems to work now. Recognises the signage which appears on the screens. Winner !
|
|
|
Post by itdisnawork on Aug 20, 2018 10:21:15 GMT
Just to confirm, obdeleven can be used to code Traffic Sign Recognition on Kodiaq 2017 Edition?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 20, 2018 12:22:16 GMT
itdisnawork provided you have the correct hardware to support the code I have no reason to believe it will not work. Give the above coding a try and see if it does and then share here.
|
|
|
Post by roblin on Aug 20, 2018 19:48:39 GMT
itdisnawork provided you have the correct hardware to support the code I have no reason to believe it will not work. Give the above coding a try and see if it does and then share here. What's the correct hardware? I'm newbie on ODB11, how do i do a scan on my Kodiaq?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 20, 2018 20:13:07 GMT
On my car it uses the Satnav and camera so presume yours is the same but i you follow the coding you will soon find out if you are missing any components (as you will get an error message when you run a scan). If you read this it will give you some idea of what the tool is about and how to use it forum.obdeleven.com/thread/2095/new-obd11-pro-helpWatch this video on how to run a scan and read the error messages
|
|
|
Post by itdisnawork on Sept 3, 2018 8:10:48 GMT
So I coded the Traffic Sign Assist on my Kodiaq Edition 2018 last night following the steps above and can confirm it works. Puts a new option in the Driver Assist menu and shows the speed signs on the MCD.
|
|
|
Post by peterede on Jan 24, 2019 10:09:57 GMT
Hi I have tried this on a 2019 model. with full info display (not maxi dot). it does not work ? I cannot find Control unit A5 or Control Unit 5F? /Peter
|
|
dimp
New Member
Posts: 3
|
Post by dimp on Jan 30, 2019 7:13:49 GMT
itdisnawork aii correctly working in Virtual cocktip
|
|
|
Post by peterede on Jan 31, 2019 12:53:42 GMT
did you use OBDeleven to get this to work ? how did yoy do it and what code ? /peter
|
|
|
Post by gogo111 on Feb 8, 2019 18:18:52 GMT
Hi
I have also problems to get it working for 2019 model with AID. When I tried to do the modification on the ECU 5F then I get the failure “31 function not available” any idea? What I noticed further is that the number “5F” of the ECU is red, what it means if a ECU number is red?
I think in the past there was a app to activated this feature, but under apps I cannot find it.
PS: I have obd11 Pro version and the car has the big camera Lane Assist was already inside so HW should be fine
|
|
mikec
New Member
Posts: 1
|
Post by mikec on Jul 25, 2019 15:05:42 GMT
Is there any solution for 2019 Skoda Kodiaq and Traffic Sign Assist? Thanks in advance!
|
|
|
Post by tomroy on Jun 9, 2020 4:21:15 GMT
I finally managed to solve it with some help from FPHU Eldar, obdeleven.pl/My car has lane assist, no satnav Traffic Sign Assist Activation1. Control Unit 5F - Information
Adaptation
Car_Function_List_BAP_Gen2 traffic_sign_recognition_0x21 = Activated, then Green tick
Car_Function_Adaptions_Gen2 menu_display_road_sign_identification = Activated, then Green tick
8. Control unit A5 (front / advance camera)
Security access - 20103 Control unit Long Coding
Byte 16
Bit 04 Activate , then Green tick
13. Control unit 17 (Dashboard)
Control unit Long Coding
Byte 5
Bit 02 Activate, then Green tick Thanks for your post, this works on my Octavia Combi 2020 mk3.5 After browsing so many sites, this one finally works, thanks man.
|
|
guyv
New Member
Posts: 2
|
Post by guyv on Jun 14, 2020 11:08:32 GMT
I have done all the activation stuff as shown and things are working fine... except the warning speed is set in kmh and I drive in the UK with mph so the warnings go off way too early. Anyone know what adaption or long coding entry is needed so that when I set the warning to visible or audible it goes off for speeds in mph?
|
|
|
Post by markjbh on Dec 28, 2020 10:23:37 GMT
Does anyone know how to get this to work on a 2020 Kodiaq? The 2020 doesn’t have the first adaptation part.
|
|
|
Post by kucharp on Apr 10, 2021 20:36:01 GMT
Passat b8 2020my did not work . shows an error in the instrument cluster no. u111000. someone will help?
|
|
|
Post by ninj901 on Apr 27, 2021 13:15:00 GMT
I have a 2020 registered sport line and the coding worked for me. Just have to sort out the fact that its speeds above KPMH not MPH. Anyone figured it out yet?
|
|
tekaj
New Member
Posts: 4
|
Post by tekaj on Jul 1, 2021 23:06:13 GMT
Passat b8 2020my did not work . shows an error in the instrument cluster no. u111000. someone will help? It maybe therefore, you have got installed already camera A5 version MFK 3.0? I had the same fault after coding in Passat B8 my21.
|
|
|
Post by chowder on Jul 4, 2021 16:33:24 GMT
Having the same issue, did you get it sorted?
|
|
tekaj
New Member
Posts: 4
|
Post by tekaj on Jul 7, 2021 21:40:50 GMT
No. I found out, the Passat B8 FL has got installed new type of camera, and coding maybe different. Another case is Fusion mode of traffic recognition in adaptation of A5 module is restricted by SWAP file, so that can cause problem with proper coding also.
|
|
|
Post by pacemaker89 on Aug 28, 2021 6:54:39 GMT
Hi guys, I think that I have an interesting threat my car is an Arteon R 3H and is equiped with Headup display and there is also an option in the menu Traffic sign assist that is activated. However I can not see any of the info on the Headup and in the dashboard (digital). I do not have ACC or Lane assist in my car does this coding work also for my car or I have to code it different? Thanks for any help
|
|
|
Post by galant56k on Oct 28, 2021 0:29:45 GMT
What Codes did you use?
I have sportLine 2021 with all cameras etc..
|
|
|
Post by galant56k on Oct 28, 2021 0:30:45 GMT
|
|
|
Post by herrrossi on Jun 18, 2022 5:57:07 GMT
Hi guys. I got activated the traffic sign assistance on my 2017 Kodiaq. It works and reads signs, but unfortunately it does not correspond with the road sign information of the navigation system. That menas when I leave a village, the indicated sign (e.g. 50 km/h) remains until a new sign will reached and read. Same when I enter a village. If I got previously a e.g. 70 km/h indication it will remain within the village until a new sign will come in view. Also I got a warning from time to time that the traffic sign assistant is not working properly.
Is this a known problem?
cheers, Herr Rossi, Germany
|
|
tas81
New Member
Posts: 3
|
Post by tas81 on Jul 3, 2022 0:37:52 GMT
Hi all - followed the steps on my late 2020 build Australian delivered Kodiaq RS.
I get an error at start up - it just says Error: Dynamic road sign display… then that disappears. I have not got a menu option and I also could not select Fusion option as it was not available.
|
|