|
Post by OBDeleven on Dec 8, 2017 10:10:41 GMT
v0.9.2.5 Improved KWP1281 connection. Fixed UDS chart value selection. Added Metric/Imperial units.
|
|
hcin
New Member
Posts: 4
|
0.9.2.5
Dec 11, 2017 16:23:46 GMT
via mobile
Post by hcin on Dec 11, 2017 16:23:46 GMT
圖表可以使用了但不能分享
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 11, 2017 20:57:07 GMT
我已经分享了一些我以前没有问题的图表,请您确认一下你做了什么来分享它们,如果可能的话请用屏幕截图。 你也可以确认你的车和位置
I have shared some charts that i made a while ago with no issues, can you please confirm what you did to share them, with screen shots if possible please. Also can you confirm your car and location
|
|
|
Post by krystian660 on Dec 12, 2017 18:45:14 GMT
There is issue with status looping after basic setting in brakes (stg 03 - TP1.6) and headlight range (stg 55). Seat Ibiza 6J FR 2013 Video is a little speed up but you can see status bar.
|
|
gulu
New Member
Posts: 3
|
0.9.2.5
Dec 13, 2017 4:45:18 GMT
via mobile
Post by gulu on Dec 13, 2017 4:45:18 GMT
Hi, ever since the initial firmware update my device has never worked the same again. Some of the time it connects to a module, most of the time it doesn't. Some of the time it is able to scan fault codes most of the time it is unable. I am therefore unable to use it now.
|
|
|
Post by OBDeleven on Dec 13, 2017 7:24:12 GMT
Hi, ever since the initial firmware update my device has never worked the same again. Some of the time it connects to a module, most of the time it doesn't. Some of the time it is able to scan fault codes most of the time it is unable. I am therefore unable to use it now. Thank you for reporting that issue is still exist in the latest version. I have activated report error function for your account and want to ask you to send error log after unsuccessful connection to control unit. To send log press three dots in top right corner and select report error.
|
|
|
Post by classexa on Dec 13, 2017 17:54:38 GMT
I can't change the service maintance interval. I go to control unit 17(instrument cluster), select adaption and enter channel 43. I enter the new value and press the checkmark. It says "(00) Function is not available".
|
|
krigl
New Member
Posts: 4
|
0.9.2.5
Dec 17, 2017 11:47:32 GMT
via mobile
Post by krigl on Dec 17, 2017 11:47:32 GMT
The chart now works on UDS, but if i review my saved chart, when i press to se a exact value on chart, the app crashes.
|
|
|
Post by classexa on Dec 19, 2017 21:16:21 GMT
I can't change the service maintance interval. I go to control unit 17(instrument cluster), select adaption and enter channel 43. I enter the new value and press the checkmark. It says "(00) Function is not available". Anyone? Is it because of this release or am I doing something wrong?
|
|
|
Post by shaarkys on Dec 23, 2017 18:13:28 GMT
I can't change the service maintance interval. I go to control unit 17(instrument cluster), select adaption and enter channel 43. I enter the new value and press the checkmark. It says "(00) Function is not available". Anyone? Is it because of this release or am I doing something wrong? Sorry, don't have such problem :-(
|
|
|
Post by classexa on Dec 24, 2017 22:11:07 GMT
Anyone? Is it because of this release or am I doing something wrong? Sorry, don't have such problem :-( Ok. Maybe it's just me. Thankfully I've my VCDS cable I can use
|
|
|
0.9.2.5
Dec 30, 2017 12:32:32 GMT
via mobile
Post by krisss on Dec 30, 2017 12:32:32 GMT
After update, not connetted for any module. How come back to official app? Because i'm beta-tester?
|
|
|
Post by shaarkys on Jan 2, 2018 18:36:06 GMT
After update, not connetted for any module. How come back to official app? Because i'm beta-tester? Any error? Try to clear app data a connect again.
|
|
hcin
New Member
Posts: 4
|
0.9.2.5
Jan 6, 2018 11:32:01 GMT
via mobile
Post by hcin on Jan 6, 2018 11:32:01 GMT
更新後圖表可以使用了可是不能分享
|
|
|
Post by krisss on Jan 6, 2018 15:15:41 GMT
Hello. I ask again how to give up being a beta tester of the application ?? Nothing works as it should, the application connects with the car for a long time, hangs, loses communication. I've had enough. I want information on how to get back to the official version of the application. You've ruined it and it's awfully this app. Cleaning, uninstalling did not help. Poorly.
|
|
|
0.9.2.5
Jan 6, 2018 17:31:11 GMT
via mobile
Post by testman on Jan 6, 2018 17:31:11 GMT
F Hello. I ask again how to give up being a beta tester of the application ?? Nothing works as it should, the application connects with the car for a long time, hangs, loses communication. I've had enough. I want information on how to get back to the official version of the application. You've ruined it and it's awfully this app. Cleaning, uninstalling did not help. Poorly. You can leave Beta-test in the Play-Store. Scroll down in Play Store at the OBD11 App site Than you must reinstall. But i don't know, the new adapter firmware is to new for the "old" OBD11 Version.
|
|
|
0.9.2.5
Jan 6, 2018 18:04:05 GMT
via mobile
Post by Krisssek on Jan 6, 2018 18:04:05 GMT
I can not see in the store, it helps resignation.
|
|
|
0.9.2.5
Jan 6, 2018 18:15:03 GMT
via mobile
Post by Krisssek on Jan 6, 2018 18:15:03 GMT
Ok . i find it. How writing, App Verison 9.2.5 is shit...
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 6, 2018 23:33:10 GMT
Krisssek I am sorry you are having these issues.
Can you please advise Car Model and Year along with Phone Model as I am currently not having any issues on my car/phone.
|
|
|
Post by Krissss on Jan 7, 2018 12:02:48 GMT
My phone is lg g4 (h815) car to audi a4 b5 (afn 110 HP) 1999 year. The problem disappeared after the installation of the official version 9.2.2. The second problem is that the device is already 2 months old and there are still no basic settings. The option is unfortunately there is no button to accept (green bird). I need this function very much to restore the climate control to the factory settings (the air vents must go to the extreme positions) after choosing the option basic settings nothing changes because I can not approve. Unfortunately, no one has done anything about it, despite the fact that I paid a lot for the device, I can not use it as it wants. I'm not happy.
|
|
|
Post by shaarkys on Jan 11, 2018 21:02:04 GMT
Provide some screenshots please otherwise I'm not sure if anyone understand your problem :-(
|
|
|
Post by Krissss on Jan 12, 2018 5:34:47 GMT
I don't have Green button. This is not my Photo.
|
|
|
0.9.2.5
Jan 12, 2018 5:36:06 GMT
via mobile
Post by Krisssek on Jan 12, 2018 5:36:06 GMT
|
|
|
Post by obd...cool on Jan 15, 2018 3:11:23 GMT
Can the negative MAF value bug be made priority? Plenty of complaints about it and shouldnt exist at this stage of development
|
|
|
Post by Halfmillion on Jan 27, 2018 8:54:36 GMT
Hi, any update information about the brand new release that was initially planned towards end of 2017?
|
|
|
Post by OBDeleven on Jan 29, 2018 13:59:57 GMT
What android device you are using? Maybe you are running our app on car radio?
|
|
|
Post by gtmoraes on Jan 30, 2018 4:41:36 GMT
App really takes its sweet time connecting to.. something. Sometimes it takes around a minute or two before even asking for which device to connect (OBDEleven or "Unknown", always, even though OBDEleven is paired already) or fails altogether. I remember it being pretty quick. 4G connection is pretty strong, but it also happens with a strong home WiFi connection (as I've read that OBDEleven needs internet).
OBDeleven device is not more than a half meter away from the phone with OBDEleven app.
I can provide logs or anything necessary to help with this.
|
|
|
Post by OBDeleven on Jan 30, 2018 8:36:58 GMT
App really takes its sweet time connecting to.. something. Sometimes it takes around a minute or two before even asking for which device to connect (OBDEleven or "Unknown", always, even though OBDEleven is paired already) or fails altogether. I remember it being pretty quick. 4G connection is pretty strong, but it also happens with a strong home WiFi connection (as I've read that OBDEleven needs internet). OBDeleven device is not more than a half meter away from the phone with OBDEleven app. I can provide logs or anything necessary to help with this. Hi, you can send log by pressing three dots in top right corner, we will check what is going on.
|
|
|
0.9.2.5
Jan 30, 2018 17:25:09 GMT
via mobile
Post by 2.0 tfsi on Jan 30, 2018 17:25:09 GMT
Can the negative MAF value bug be made priority? Plenty of complaints about it and shouldnt exist at this stage of development Das wäre super wenn das Problem behoben würde!
|
|
|
Post by gtmoraes on Jan 30, 2018 20:15:17 GMT
App really takes its sweet time connecting to.. something. Sometimes it takes around a minute or two before even asking for which device to connect (OBDEleven or "Unknown", always, even though OBDEleven is paired already) or fails altogether. I remember it being pretty quick. 4G connection is pretty strong, but it also happens with a strong home WiFi connection (as I've read that OBDEleven needs internet). OBDeleven device is not more than a half meter away from the phone with OBDEleven app. I can provide logs or anything necessary to help with this. Hi, you can send log by pressing three dots in top right corner, we will check what is going on. I'm glad to help Three logs sent, first regarding app connection time, second regarding two new VW Up! apps that doesn't apply to the VW Up!, I think and the third regarding app connection once again. Times were 16:46, 16:47 and 17:00 GMT -3. By the way, I've clicked to send the logs, but there was no feedback regarding if the logs were successfully sent, or even sent at all. A toast with "Logs sent!" when successful would be much appreciated Feel free to contact me for whatever needed
|
|