|
|
Post by Kp032298 on Apr 5, 2024 16:47:31 GMT
For those who are interested, here is a a few things I was able to tweak with the obdeleven on the 2024 Atlas. I was also able to perform the SFD unlock as well which was needed to get into some of the modules. Disabled seat belt chime Enalbed keyboard on apple car play Enabled media in motion for android auto Changed throttle response to full drive by wire Windows up with remote Added boost gauge, and few other performance gauges to the dash Was able to change some of the digital dash coloring, but didn't spend a ton of time tweaking it Things I haven't gotten to work is disabling auto start/stop (sounds like the gti guys haven't either), adding digital dash options such as boost gauge, and unlocking some of the menu options while in motion. |
|
|
|
Post by Kp032298 on Apr 5, 2024 16:48:57 GMT
How did you change the digital dash coloring?
|
|
|
|
Post by jadranko3 on Apr 5, 2024 18:32:06 GMT
What did you to make Windows up with remote
|
|
tweaker
New Member
2024 VW Atlas SEL PREMIUM R LINE
Posts: 23
|
Post by tweaker on Apr 16, 2024 14:18:11 GMT
There is a modification to lock the vehicle while it’s running in OBD 11 I was able to change that for those who asked for the 2024
|
|
|
|
Post by apocryphon on Apr 19, 2024 16:57:11 GMT
Lots of info on here! Just purchased the OBD11 device and have been reading up on what’s working and not. Not sure what adaptation means or when it’s necessary.
Mainly want to disable seatbelt chime, enable video in motion, and key fob function with car on.
Is this list still accurate for the 2024 atlas?
|
|
|
|
Post by mario958 on Apr 20, 2024 2:27:32 GMT
yes, everything is here in this post for 24 model.
|
|
|
|
Post by willb0311 on Apr 22, 2024 16:50:44 GMT
|
|
|
|
Post by audisthesia on May 7, 2024 13:11:05 GMT
Yes it does work. Installed mine last night. Best $25 dollars I've spent on the Atlas. |
|
|
|
Post by jzak5187 on May 7, 2024 14:20:08 GMT
Yes it does work. Installed mine last night. Best $25 dollars I've spent on the Atlas. I'll have to install mine. Was it pretty easy? |
|
|
|
Post by turbov on May 10, 2024 2:29:27 GMT
Yes it does work. Installed mine last night. Best $25 dollars I've spent on the Atlas. Just confirming you installed this on a 2024 correct? |
|
|
|
Post by audisthesia on May 10, 2024 14:33:59 GMT
Yes it does work. Installed mine last night. Best $25 dollars I've spent on the Atlas. Just confirming you installed this on a 2024 correct? Yes it is a 2024 Rline |
|
|
|
Post by audisthesia on May 10, 2024 14:34:18 GMT
Yes it does work. Installed mine last night. Best $25 dollars I've spent on the Atlas. Just confirming you installed this on a 2024 correct? Yes, it was easy. You have to contort yourself to get under the drivers side dash. |
|
|
|
Post by turbov on May 16, 2024 20:19:22 GMT
Okay I got the harness. Attempted to install it quickly while I had some down time and car wouldn't start, threw a bunch of codes. Everything cleared with obdeleven thankfully. The harness seemed to be plugged in correctly, I played with it a bit before attempting to start and it really only goes on one way as far as the connectors go. Also there's two post that hold the module in place it's pretty simple to take the module off and work with it by the brake pedal
Did you guys disconnect the battery to install this? Or did you clear codes after install and then start? My module is the same part number as the Chinese video except my module ends in a different letter (F vs K). Not sure if that would be the issue or if there is a step I'm missing as I can't understand the video.
|
|
|
|
Post by audisthesia on May 19, 2024 22:44:43 GMT
Okay I got the harness. Attempted to install it quickly while I had some down time and car wouldn't start, threw a bunch of codes. Everything cleared with obdeleven thankfully. The harness seemed to be plugged in correctly, I played with it a bit before attempting to start and it really only goes on one way as far as the connectors go. Also there's two post that hold the module in place it's pretty simple to take the module off and work with it by the brake pedal Did you guys disconnect the battery to install this? Or did you clear codes after install and then start? My module is the same part number as the Chinese video except my module ends in a different letter (F vs K). Not sure if that would be the issue or if there is a step I'm missing as I can't understand the video. No battery disconnect. No codes. I'll assume you plugged both ends in accordingly. F vs K won't matter, last character on VAG PN are revision code. Higher letter=more recent part revision for same part. |
|
|
|
Post by herationkane on May 26, 2024 21:30:53 GMT
Hi, Apparently I was not able to disable start-stop. I changes it via Engine (1) / Addaption - But it did not have any affect. So far, (4 engine cycles) this has worked for me. I don’t know if it will revert back or why it failed on your attempt. |
|
|
|
Post by herationkane on May 26, 2024 21:34:06 GMT
Does anyone know how to change the comfort signal from 3 to 5 blinks?
|
|
|
|
Post by itamarbh on May 27, 2024 0:50:48 GMT
Hi, Apparently I was not able to disable start-stop. I changes it via Engine (1) / Addaption - But it did not have any affect. So far, (4 engine cycles) this has worked for me. I don’t know if it will revert back or why it failed on your attempt. What exactly did you do? I will try on my end... |
|
|
|
Post by herationkane on May 27, 2024 15:06:10 GMT
What exactly did you do? I will try on my end... 01 engine, adaptation,disable auto start/stop Old value: active New value: not active Mine still shows the auto start/stop off like I pushed the key on screen and hasn’t reverted back 🤞🏻 |
|
|
|
Post by wallstreet123456 on May 28, 2024 19:44:59 GMT
Is it possible to change the area view of the camera so it is not zoomed in so much, it would be nicer if I could see more around the Atlas. I have the 2024, perhaps this is the only way it can show the area around.
|
|
|
|
Post by herationkane on May 29, 2024 17:58:42 GMT
Does anyone know how to change the comfort signal from 3 to 5 blinks? Well…I found the option for comfort blinker but it only allows values of 0-3. |
|
|
|
Post by whataboutthis on May 29, 2024 19:57:28 GMT
Does anyone know how to change the comfort signal from 3 to 5 blinks? Well…I found the option for comfort blinker but it only allows values of 0-3. From memory VAG have turned off the 5 feature |
|
|
|
Post by btlogan on Jun 3, 2024 5:06:12 GMT
|
|
|
|
Post by Lance on Jun 3, 2024 20:07:52 GMT
Can you tell me how you use the ODB-II to change settings like this? My wife has a new Atlas, and I would really like to change a couple of settings. Primarily one dealing with the easy exit not going far enough back.
|
|
|
|
Post by herationkane on Jun 7, 2024 4:02:36 GMT
01 engine, adaptation,disable auto start/stop Old value: active New value: not active Mine still shows the auto start/stop off like I pushed the key on screen and hasn’t reverted back 🤞🏻 The auto start/stop reverted back to its normal position. It remained disabled for several days, then shut off at a light, so Ive ordered the cable from a couple post above. |
|
|
|
Post by herationkane on Jun 17, 2024 17:16:31 GMT
I purchased this cable and even after installing it mine still auto stops! |
|
|
|
Post by herationkane on Jun 19, 2024 1:10:30 GMT
I purchased this cable and even after installing it mine still auto stops! Well, it seems to be working now! 🤷 |
|
pod
New Member
VW Polo GTI 2020 DKZC
Posts: 1
|
Post by pod on Jul 24, 2024 8:39:49 GMT
Did the following today. Not sure if anybody needs or I should post somewhere else Rear Wiper Automatic Activation Control Unit 09 Adaptation Rear Window Wiper Find: Automatisches Heckwischen Old Value: Not_active New Value: Active After approximately 45 seconds the rear wiper will activate with steady wiping of the front wipers. Eliminates the need to push stalk forward to turn on rear wipers. Hi, can you please clarify: After the front wiper is on for at least 45 secs, does rear wiper: - make one wipe every 45 seconds or so (turns on rear interval wiping) or - turns on and keeps wiping continuously until switched off? thx |
|
|
|
Post by Joninotown on Jul 31, 2024 17:28:35 GMT
Following I want the same.
jm
|
|
tweaker
New Member
2024 VW Atlas SEL PREMIUM R LINE
Posts: 23
|
Post by tweaker on Aug 5, 2024 19:41:11 GMT
It does an interval swipe IF the front are activated for 45 + seconds…
|
|
|
|
Post by JDS on Aug 19, 2024 11:55:25 GMT
I’ve done my research since buying my Atlas in September and the wiring harness is connected to the dynamic light bar but disabled for the lowest trim(aka my trim) trying to figure out what adaptation would turn this on??? Driving me nuts have a light bar just sitting there unusable. I'm trying to get this to work too. I saw in a retrofit thread for the GTIs this is the adaption that has to be tweaked. Maybe if someone with a higher trim shows us what the values are on it? I tried copying the GTI values and got nothing and eventually threw a DRL fault so I coded back to not active forum.obdeleven.com/post/72980 Was anyone able to figure this out? |
|
