|
Post by thematmendes on Aug 1, 2017 16:32:02 GMT
Hi there,
I need help on how to enable the DPF emergency/forced regeneration while driving with my obdeleven pro. Could I have the steps to do it?
Thanks in advanced.
Marco
|
|
|
Post by tstrempel on May 11, 2018 14:09:40 GMT
I have the same problem
|
|
nxs
New Member
Posts: 19
|
Post by nxs on Oct 16, 2018 15:54:45 GMT
It would be useful to mee yes.
|
|
|
Post by Thirsty on Oct 16, 2018 17:34:55 GMT
|
|
|
Post by MMiljevic on Nov 10, 2018 22:12:21 GMT
when I start regeneration in driving or standing. if she stops herself after the end. Or is it I have to stop? and when I started regenerating over OBD eleven, how can I monitor the temperature of the DPF and should I stop it?
|
|
nxs
New Member
Posts: 19
|
Post by nxs on Nov 12, 2018 19:37:00 GMT
when I start regeneration in driving or standing. if she stops herself after the end. Or is it I have to stop? and when I started regenerating over OBD eleven, how can I monitor the temperature of the DPF and should I stop it? It will turn off automaticly (revs will be 900rpm again) after 30 mins
|
|
|
Post by breezeslife on Feb 5, 2019 20:52:34 GMT
This is not working with ODBeleven,
|
|
nxs
New Member
Posts: 19
|
Post by nxs on Feb 5, 2019 23:03:56 GMT
This is not working with ODBeleven, Its working
|
|
|
Post by davida4b8 on Feb 22, 2019 22:11:53 GMT
Yep should be possible with OBDEleven
But don‘t use it too often you will ruin your DPF
|
|
|
Post by clayen on May 11, 2019 0:37:03 GMT
How do you activate regenerating pdf? I need 5 digit code to access it?
|
|
|
Post by adiwob on May 13, 2019 6:25:51 GMT
How do you activate regenerating pdf? I need 5 digit code to access it? Here you are: 12233 = Regeneration while Driving 27971 = Regeneration while Standing
|
|
|
Post by karol12 on Oct 30, 2020 21:14:04 GMT
.
|
|
|
Post by karol12 on Oct 30, 2020 21:19:43 GMT
Hi , I new with OBDeleven. I have problem with the DpF regeneration on A4 b8 2012. I have OBDeleven ultimate pro version on iPhone 11pro I cannot start regeneration process it’s say it’s go to “exude due to the safety reasons “ I have been following the instructions how to Can someone help me please ,?? will be very appreciated . Thank you
|
|
|
Post by adiwob on Oct 30, 2020 21:23:58 GMT
|
|
|
Post by karol12 on Oct 30, 2020 21:48:21 GMT
Will try that ...and let you know Thanks
|
|
|
Post by karol12 on Oct 31, 2020 8:54:56 GMT
Hi guys Today I have try the proces as it’s say and no lack at all Cannot force to start the proces I followed as it’s say and no joy Can someone confirm it’s working on new obd eleven ultimate new generation .
I don’t have the bit where it’s say for Chanel to enter
I do it like that.
I go to. Enter the code , Then basic settings Regenerate the dpf. , then start it’s say finish due to safety reasons Go back switch off the engine ( don’t take the key out !!!) Then start the car again Code Then basic settings Regeneration dpf Then start . Then the flow plug lights flash. And. No Rev rising at all And it’s no telling me to press the brake. press accelerator
|
|
|
Post by karol12 on Nov 3, 2020 17:45:09 GMT
Hi mate , I have try that and no joy ( It’s not possible to du it I have next generation obd eleven on iPhone 11pro It’s different menu than on the android. Phone !!! It’s not working . Can someone help please !!!!
|
|