|
Post by vwjap on Oct 31, 2019 15:39:58 GMT
Hello, I have managed to activate this menu but in the list of colors this appears to me, do you know where the error is? maybe if you had a golf we could help,
|
|
aigort
Closed beta tester
Posts: 4
|
Post by aigort on Oct 31, 2019 15:43:16 GMT
the switchboards of a golf and a lion are the same 🤦🏻 I asked here why the topic was being talked about recently
|
|
|
Post by vwjap on Oct 31, 2019 15:46:59 GMT
Ok then we’ll follow my instructions and it should work, simple, but I’m guessing that you may have different switches in your module
do me a favour, change language to English then search through 09 adaptions for interior light, light configuration: then copy and paste here like this vvv
Interior light, light configuration:
Ambiente_Applikationsleisten_in_Tuertafel:
installed
Ambiente_Lautsprecher:
not installed
Ambiente_Applikationsleisten_in_Instrumententafel:
not installed
Cockpitbeleuchtung:
not installed
Mittelkonsolenbeleuchtung:
not installed
Dachbeleuchtung:
not installed
Panoramaschiebedachbeleuchtung:
not installed
Fussraumbeleuchtung:
installed
Farbwahl ueber HMI:
not installed
Farbwahl ueber Fahrprofil:
not installed
LIN-Dachkonsole lokal aktivierbar:
not active
Ambientemenue mit globalem aus:
not active
Ambientemenue mit alle Zonen:
not active
Ambient_Farbliste_HMI:
not active
Frei_Farbwahl_ueber_HMI:
not active
|
|
|
Post by gtifanatic on Nov 2, 2019 19:34:48 GMT
Hello,
I have a polo gti 2018(same adaptions as golf fl). i tried already a lot things, but some codings i cant find the option or info in the adaption option.
can somebody help me?
rainclosing, zugangskontrolle?? where is this now? Us lights, doest go on, i used several codings?
changing the lightsensor settings(early, late or normal drl go out and big lights go on), cant find a coding for this? in my seat i could change this in the menu of the radio.
acc overtaking by right lane, cant find a coding for this?
Footwell, handle for door and dashboard lighting ALWAYS ON, now its only on when sensor for light says its too dark outside.
I hope somebody can help me! thanks in advance
j
|
|
|
Post by vwjap on Nov 2, 2019 19:49:22 GMT
Rainclosing doesn’t work on the mk7.5 golfs, wrong hardware
acc long coding byte 02 (bit 5 ticked) overtaking_right_prevention set it from active to not active
my ambient lighting is only on with lights on
|
|
|
Post by Carolco on Nov 3, 2019 9:53:34 GMT
Hello to everybody. 1. i see in the ateca the pulsed light start. How can I do this in our 7.5 ? I refer in the start button.... I think that have the codification for this. Tomorrow try this.....😉 2. and how can we put te intermediate speed? I think is display depiction in mode 3 (adaptations in 17 Dashboard). In my dashboard the gti and R, not show the intermediate speed...😳
|
|
|
Post by gtifanatic on Nov 4, 2019 23:11:59 GMT
Rainclosing doesn’t work on the mk7.5 golfs, wrong hardware acc long coding byte 02 (bit 5 ticked) overtaking_right_prevention set it from active to not active my ambient lighting is only on with lights on thanks i only cant mange to code the following Button drivingprofile turning off Stg 09 - codierung - Byte 15, Bit 7 aktivieren (zusatzcodierung fahrerprofiltaster hat keine led) > led not installed Sensor light changing to sensitive STG 09 (Bordnetz) auswählen STG Zugriffsberechtigung -> Funktion 16 Zugriffscode 31347 eingeben STG Anpassung -> Funktion 10 (8)-Assistenzlichtfunktion - Lichtsensorempfindlichkeit auswählen Wert auf sensitive setzen Default: normal US lights can you help me?
|
|
|
Post by dv52 (Australia) on Nov 5, 2019 8:02:18 GMT
thanks i only cant mange to code the following Button drivingprofile turning off Stg 09 - codierung - Byte 15, Bit 7 aktivieren (zusatzcodierung fahrerprofiltaster hat keine led) > led not installed Sensor light changing to sensitive STG 09 (Bordnetz) auswählen STG Zugriffsberechtigung -> Funktion 16 Zugriffscode 31347 eingeben STG Anpassung -> Funktion 10 (8)-Assistenzlichtfunktion - Lichtsensorempfindlichkeit auswählen Wert auf sensitive setzen Default: normal can you help me? gtifanatic:Hi. With vwjap's forgiveness for stealing his thunder - consider this:
"Button drivingprofile turning off" - do this instead: Go to hex09 module Select Adaptations Search for Button in center console
Select Zusatzcodierung Fahrprofiltaster hat keine LED and set value to LED not installed
"Sensor light changing to sensitive" - do this instead:
Go to hex09 module Select Adaptations Search for Assistance light functions Select Lichtsensorempfindlichkeit and set to early
At some stage in both tweaks above you will be asked for a security access code - use 31347
Don
|
|
|
Post by vwjap on Nov 5, 2019 10:12:10 GMT
No thunder stolen dude 👌🏻
|
|
|
Post by Carolco on Nov 5, 2019 20:25:14 GMT
Hi everybody.
This mod is the beat efect in the start button. It is works.... like in Seat ibiza.....
Go to B7 module: Access Startsystem interface
Go to adaptations
Find DEVELOPERCODING: SEARCH LIGHTS
ACTIVATE......ZAT_Ilumination_concept_mybeat_clamp58xt
ACTIVATE......ZAT_Ilumination_modus_mybeat_clamp58xt
Any idea to put the start button in red, for more effect of the beat?
Greetings from Tenerife, where no rains...
|
|
|
Post by leproide on Nov 5, 2019 21:38:06 GMT
Heart-Beat light effect on Start Engine Button for Keyless
Module B7 - Access Startsystem Interface Security Access -> 20103 Adaptation Submenu - DeveloperCoding: Search lights - ZAT_illumination_concept_mybeat_clamp58xt -> Activated (Default -> Not activated) - ZAT_illumination_modus_mybeat_clamp58xt -> Activated (Default -> Not activated)
|
|
|
Post by simonz82 on Nov 7, 2019 11:27:16 GMT
thanks
|
|
|
Post by leproide on Nov 7, 2019 20:49:01 GMT
Progressive fade in/off internal light I find the coding right now on a forum for the Golf R MK7, the coding is just a little bit different on obd11 but work like a charm <3 This is the correct coding for OBD11 on Golf MK7: Module(09) - Central Electrics Adaption Submenu: Suchbeleuchtung_allgemein Value: KL58 Einschalten mit Rampe -> active Source: vwvortex.com Video:
|
|
|
Post by neemagti75 on Nov 8, 2019 21:38:46 GMT
Hello I am new here, I have searched for this feature (monitoring live data on virtual cockpit and couldnt find anything)
Can anyone help with coding for this,please?
|
|
|
Post by joaosantos on Nov 12, 2019 0:50:39 GMT
Hi everyone
So I have this Golf Mk 7.5 1.6 TDI R-line and it has the Driving Package with Light Assist factory fitted (ACC, Lane Assist, Blind Spot Assist, Emergency Assist, etc.) It also has LED dynamic lights. I've tried to enable the Dynamic Light Assist function, but I've realized a couple of things:
First On cars with Dynamic Light Assist factory fitted, the inner light module on the headlights (I believe that's the highbeam light) is always on no matter you are on low beam or high beam. In those that doesn?t have the function, only the outter headlamp module is on and only on highbeam the inner module iluminates.
Second Driving on the highway, I notice that the system activates but it only activates the right side highbeam fully and the left one is on but always dimmed even without any traffic present. Also many cars on the opposite lane flash me because of the highbeam and the car simply turns it off.
Does anyone knows how to enable it propely? And make it function like it would?
Thanks
|
|
|
Post by Carolco on Nov 12, 2019 16:53:45 GMT
It is very difficult without a scan of your car. Try to share a backup of your modules first especially modules 4B and A5
|
|
|
Post by andrewp on Nov 12, 2019 21:05:10 GMT
Ok to get the footwell and door brightness sliders you need to change these 2 to from 0 to 8x1 (11111111, although I have tried any other 8 figure binary and it seems to work), IGNORE THE PATTERN OF 0-255 that Obdeleven puts up Central electronics Interior lighting, parameter: p_ambientelicht_verbauinformation_HMI: 11111111 (default is 0, and this one is for footwell) p_ambientelicht_verbauinformation_HMI_2: 11111111 (default is 0, and this one is for the door) I’m sure HMI_3 & 4 will put the settings cog on for other lights like maybe Center console if you had them in your car Now you will have the cogs on the brightness screen, but the glow will be WHITE Now if you want the glow on the screen to be the same colour as your display (like my pictures are green up there ^^^) Interior lighting, parameter: p_ambienteumfang_mehrfarbig_HMI: 100 (default is 0, footwell) p_ambienteumfang_mehrfarbig_HMI_2: 100 (default is 0, door) There you go independent footwell and door lighting with colour change Hello vwjap, Did you change the value without any problems? I'm trying on my mk7.5 using a vcds but not let me coz of restriction referring to 256bit coding. Next week I'm looking forward to buy a obd11 next gen. See what's gonna happen.. Any advice will be appreciated.
|
|
|
Post by vwjap on Nov 12, 2019 21:31:27 GMT
If you look back through this thread you will see I mentioned to voltas that it wouldn’t except binary (template was 0-255 I think) as what I found in a car with the settings, then a while later it it did and all worked good, I’m afraid I don’t know if that mod works with vcds as I don’t have it, you haven’t got a hacked version have you as I know loads of mods don’t work on them, and you can’t update the software,
|
|
|
Post by dv52 (Australia) on Nov 12, 2019 22:12:06 GMT
andrew: If you are having problems getting the "other manufacturer's" cable to work, I suspect that you are not using the current release product. Your mk7.5 uses the updated UDS (OBD version 2) protocols in some modules and I suspect in the hex5F module. If you are using anything older than the current HEX series units - forget it!!!
Don
|
|
|
Post by joaosantos on Nov 13, 2019 0:51:47 GMT
Hello So here is the backup data from the 4B and A5 module of my mk 7. 5 golf regarding the problem I have with DLA. A guy told me that despite having the multifunction camera and the dynamic led headlights factory fitted, the part of the led headlights is different from a car with DLA factory fitted. Is that true? Thanks
|
|
|
Post by karlitos on Nov 20, 2019 19:55:00 GMT
Hello to everybody. 1. i see in the ateca the pulsed light start. How can I do this in our 7.5 ? I refer in the start button.... I think that have the codification for this. Tomorrow try this.....😉 2. and how can we put te intermediate speed?
I think is display depiction in mode 3 (adaptations in 17 Dashboard). In my dashboard the gti and R, not show the intermediate speed...😳Answer: Try to moddifing: "17-Instruments" Adaptation Channel: Speedometer_final_valueChoose one of them (it works in my new Jetta GLI 2019 - versions 4 and 5): Version 0 = 20/40, vel. max 260 Version 1 = 20/40, vel. max 280 Version 2 = 20/40, vel. max 240 Version 3 = 20/40, vel. max 300 Version 4 = 10/20, vel. max 260 Version 5 = 10/20, vel. max 280
|
|
|
Post by vwjap on Nov 20, 2019 20:36:54 GMT
Not in my module dude
|
|
|
Post by miguelwhy on Nov 21, 2019 1:43:24 GMT
I found this code to put the peace car function on the basic led pilots in 7.5 someone could confirm that it is correctIn the chat that I saw him he said that there was only to change the ones with *****
Leuchte16BLK SLB35 BLK SL KC9: Inner tail light, right Lasttyp 16: 43 - allgemeine LED Lampendefektbitposition 16: 0 Fehlerort mittleres Byte DTC-DFCC 16: 36 Lichtfunktion A 16: Standlicht allgemein (Schlusslicht, Positionslicht, Begrenzungslicht) Lichtfunktion B 16: nicht aktiv —> Blinken rechts Dunkelphase ***** Dimmwert AB 16: 127 Lichtansteuerung HD AB 16: only_if_closed Lichtfunktion C 16: nicht aktiv —> Blinken rechts Hellphase ***** Lichtfunktion D 16: nicht aktiv Dimmwert CD 16: 0 Dimming Direction CD 16: maximize —> minimize ****** Lichtfunktion E 16: nicht aktiv Lichtfunktion F 16: nicht aktiv Dimmwert EF 16: 0 Dimming Direction EF 16: maximize Lichtfunktion G 16: nicht aktiv Lichtfunktion H 16: nicht aktiv Dimmwert GH 16: 0 Dimming Direction GH 16: maximize
Leuchte17TFL R BLK SRB3 TFL R BLK SR KC3: Inner tail light, left Lasttyp 17: 43 - allgemeine LED Lampendefektbitposition 17: 0 Fehlerort mittleres Byte DTC-DFCC 17: 35 Lichtfunktion A 17: Standlicht allgemein (Schlusslicht, Positionslicht, Begrenzungslicht) Lichtfunktion B 17: nicht aktiv —> Blinken links Dunkelphase ***** Dimmwert AB 17: 127 Lichtansteuerung HD AB 17: only_if_closed Lichtfunktion C 17: nicht aktiv —> Blinken links Hellphase ***** Lichtfunktion D 17: nicht aktiv Dimmwert CD 17: 0 Dimming Direction CD 17: maximize —> minimize ***** Lichtfunktion E 17: nicht aktiv Lichtfunktion F 17: nicht aktiv Dimmwert EF 17: 0 Dimming Direction EF 17: maximize Lichtfunktion G 17: nicht aktiv Lichtfunktion H 17: nicht aktiv Dimmwert GH 17: 0 Dimming Direction GH 17: maximize
Leuchte23SL HLC10: Outer taillight, left Lasttyp 23: 43 - allgemeine LED Lampendefektbitposition 23: a Fehlerort mittleres Byte DTC-DFCC 23: 29 Lichtfunktion A 23: Standlicht allgemein (Schlusslicht, Positionslicht, Begrenzungslicht) Lichtfunktion B 23: nicht aktiv —> Blinken links Dunkelphase ***** Dimmwert AB 23: 127 Lichtansteuerung HD AB 23: always Lichtfunktion C 23: nicht aktiv —> Blinken links Hellphase ***** Lichtfunktion D 23: nicht aktiv Dimmwert CD 23: 0 Dimming Direction CD 23: maximize —> minimize ***** Lichtfunktion E 23: nicht aktiv Lichtfunktion F 23: nicht aktiv Dimmwert EF 23: 0 Dimming Direction EF 23: maximize Lichtfunktion G 23: nicht aktiv Lichtfunktion H 23: nicht aktiv Dimmwert GH 23: 0 Dimming Direction GH 23: maximize
Leuchte24SL HRA65: Outer taillight, right Lasttyp 24: 43 - allgemeine LED Lampendefektbitposition 24: 1a Fehlerort mittleres Byte DTC-DFCC 24: 2a Lichtfunktion A 24: Standlicht allgemein (Schlusslicht, Positionslicht, Begrenzungslicht) Lichtfunktion B 24: nicht aktiv —> Blinken rechts Dunkelphase ***** Dimmwert AB 24: 127 Lichtansteuerung HD AB 24: always Lichtfunktion C 24: nicht aktiv —> Blinken rechts Hellphase ****** Lichtfunktion D 24: nicht aktiv Dimmwert CD 24: 0 Dimming Direction CD 24: maximize —> minimize ***** Lichtfunktion E 24: nicht aktiv Lichtfunktion F 24: nicht aktiv Dimmwert EF 24: 0 Dimming Direction EF 24: maximize Lichtfunktion G 24: nicht aktiv Lichtfunktion H 24: nicht aktiv Dimmwert GH 24: 0 Dimming Direction GH 24: maximize I also saw this video of the operation
|
|
|
Post by karlitos on Nov 21, 2019 3:46:00 GMT
Hello to everybody. 1. i see in the ateca the pulsed light start. How can I do this in our 7.5 ? I refer in the start button.... I think that have the codification for this. Tomorrow try this.....😉 2. and how can we put te intermediate speed?
I think is display depiction in mode 3 (adaptations in 17 Dashboard). In my dashboard the gti and R, not show the intermediate speed...😳Answer: Try to moddifing: "17-Instruments" Adaptation Channel: Speedometer_final_valueChoose one of them (it works in my new Jetta GLI 2019 - versions 4 and 5): Version 0 = 20/40, vel. max 260 Version 1 = 20/40, vel. max 280 Version 2 = 20/40, vel. max 240 Version 3 = 20/40, vel. max 300 Version 4 = 10/20, vel. max 260 Version 5 = 10/20, vel. max 280 Sorry, I made a mistake, the channel “Speedometer_final_value” is applied to Polo MK6. The correct channel to Jetta MK7 GLI is “Tachometer end value”.
|
|
|
Post by Carolco on Nov 21, 2019 22:07:17 GMT
tomorrow i try to locate this channel in the adaptations of module 17. Thanks for your help.
And I will check the A5 and 4B modules of Joaosantos.
|
|
|
Post by Carolco on Nov 21, 2019 22:23:57 GMT
Hi Joao.
Please check and share the configuration of Fernlicht assistent of the module 09.
I have to check something here. In the module 4B there is another lines of text codification after Static AFS Lights....
Try to see the page of AS.Coding (great coding share),,,,,,,,,,, www.ascoding.ch/en/activating-dynamic-light-assist-dla/
If you change something, please first make a backup of the module. And write down all you change.....
I think that long coding of module 4B must change the byte 10, bit 6 (mdf activation) On but bit 7 in Off. in byte 11, only bit 0 activated, rest of bits not activated.
and in module 09 _ Adaptation
|
|
|
Post by karlitos on Nov 24, 2019 13:52:20 GMT
Can anybody help me with the code for this function: raise the windows with one click?simonz82 video's author. Automatic closing in case of blocking is the starting point.
|
|
|
Post by vwjap on Nov 24, 2019 14:03:50 GMT
Someone has suggested it to do with a new firmware that gives you options in the ZV Komfort menu
Also if you translate bloccaggio from Italian it doesn’t mean blocking it means locking 😉
|
|
|
Post by dv52 (Australia) on Nov 24, 2019 23:43:00 GMT
karlitos: Is this a duplicated question? - see my response to "freeway" to the very same question HEREDon
|
|
|
Post by Carolco on Nov 25, 2019 16:45:06 GMT
Hi Don. The question is the next option....
|
|