|
|
Post by andreamala on Jun 3, 2023 13:02:16 GMT
Does anyone know the coding to have the DRL always at maximum brightness on PXA PXB or PXC headlight? (Of course with the turn signals they must go out as it should be)
|
|
|
|
Post by dv52 (Australia) on Jun 3, 2023 21:59:03 GMT
andreamala: Hi. Using exactly the same level of specificity as the words in your post - the answer is "YES" assuming that this car doesn't use Light Control Modules (LCMs)!! 
However, without more specific details about this car - ain't possible to provide more information.
Maybe include screenshots of the Leuchte2SL VLB10 and Leuchte4TFL LB4. To be clear, I need to see the values of ALL 19 x adaptation channel values for each Leuchte-set in your pictures
Don
|
|
|
|
Post by andreamala on Jun 3, 2023 22:23:09 GMT
  Leuchte3 is the same Leuchte4 and 5 is the same |
|
|
|
Post by dv52 (Australia) on Jun 3, 2023 22:37:21 GMT
hmm........ thanks for the quick response.
As you can read from your screenshots - the 19 x channels in Leuchte2SL VLB10 are ALL not-active/0. If "Leuchte 3, 4 and 5" have the same values - it means that the DRLs on this car are NOT controlled by the central electrics module. Instead, I suspect that this car uses LCMs to control the headlight lamps.
Alas, OBD11 can't access LCM coding- so it's not possible to alter the factory operation of the headlight lamps on this car!
Don
|
|
