|
Post by kaaskop on Oct 18, 2020 18:15:54 GMT
Then i dont have it, i can change settings with the dongle on my car with my2020 production code. I have the airco always on, so that cant be the case. Im 100% sure stop/start still worked but as mentioned it seemed to turn off less often. I'll try to monitor in the upcoming days if i have to drive again, not sure when as with covid19 i have a work from home policy, hence way less in the car then i would like too.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 18, 2020 19:27:15 GMT
OK Thats very kind of you to update us, I personally fitted a memory module so that I can turn it off / on and it remembers the last state which I much prefer.
Just one last question do you have the MK3 or the MK4
|
|
|
Post by kaaskop on Oct 18, 2020 21:52:56 GMT
Again not sure what you mean with that, if you mean if i have a 5F or a KL then i have a 5F facelift newly delivered by the dealer in august 2019, but still got a my2020 production code acording to my dealer.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 18, 2020 22:05:04 GMT
Thank you just making sure you don't have the new MK4 Model (KL) which will have the SFD Issue.
You have a late model MK3 (5F) where vw stopped the ability to code out stop start using the old methods so fingers crossed that going forward this does work on your car (as the original coding came from various other MQB Platform cars and just want to check it works on the Leon. Provided the Aircon is on.
|
|
|
Post by kaaskop on Oct 19, 2020 18:14:21 GMT
Ok, i have reverted the change. This evening i had a drive and ran in a lot of 'problems' with the car. First traffic light i had to stop the engine did not turn off. Second trafficlight it did. During the drive my check engine light turned on but looking in the car section at first it didnt show any errors. At the 3th traffic lights it gave a malfunction error for the start/stop system. Plugged in the OBD11 dongle and did a scan, it came up with 10 errors in all different places. Errors like fuel pressure sensor, current to high, driver and passenger door, current to low for both carkeys, lost communication with steering colum, adaptive cruise control error to name a few. Even though OBD11 showed all these errors most things still seemed to work without problems besides the ACC. Turned off the car, cleared the errors and started it again without errors. Will see in a later drive id errors come back but i dont think so as i didnt have them before the change. Also not sure how all these systems are related but this is the behaviour i saw.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 19, 2020 19:30:04 GMT
Dont understand that but safest to not take any chances.
There was some coding a while ago on the Leon where if you just had Cruise control it went crazy like this but no issues if you had ACC.
Fingers crossed this is the last you see of this problem, I would not try it again.
|
|
|
Post by enes28 on Oct 20, 2020 20:39:38 GMT
Hi everyone,
I can't do ESC sport ESC off on 2020 leon passat etc..
03 >> 20103 >> long coding >> byte 29 02 to 06 and it gives ''function not available''
Why could it be ?
Thanks..
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 23, 2020 12:11:45 GMT
I would do a data / cache clear of your app on the android phone and try it again.
|
|
|
Post by enes28 on Oct 29, 2020 20:42:41 GMT
it did not work.
any idea ?
|
|
|
Post by kevbert on Dec 29, 2020 5:44:25 GMT
Recently got by OBDEleven Pro for iPhone. Just tried to activate the mirror folding with ignition on my MY2019 Leon. STG 09 -> Zugriffsberechtigung 31347 Anpassungskanal "Signalisierung Spiegelanklappen" Unfortunately it doesnt work. I know that it is possible with some kinds of gateway indexes (eg DD, that i have).
Any suggestions on that?
|
|
|
Post by xfahiim on Jan 29, 2021 19:23:41 GMT
Hi there, I have Seat Leon 5F Facelift Reference, I want to make DRLs always running even when I put on the Headlights. Is it possible with vcds? Did you find a method to do this?
|
|
hodaya17
New Member
long coding list
Posts: 6
|
Post by hodaya17 on Jul 11, 2021 13:37:55 GMT
Hi guys, I am pretty new to OBD 11 and just long coded some small things on my Leon 5F FR MJ19: -Needle Sweep -Refuel quantity -Fan level on auto Now I would like to code: -Disable open door alarm -Disable the headlight washers -More ambient colors -Pace-car indicators -Rain close I don't like to use the apps, because you can't see what changed. And I already got a sporadic error while coding, which luckily didn't came back yet. Is it difficult to code these by myself? The codings I already did just needed one value to be adjusted. Thanks in advance! hello can you send me how to "needle sweep" on mk2 seat leon 2013 car? ? 1.8tsi DSG gearbox petrol car thanks ahead joe
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 11, 2021 14:20:21 GMT
You are on the Facelift MK3 Thread. Needle sweep for mk2 obdeleven.proboards.com/post/21199 give that a go. With regards your question about is coding easy - yes just take you time and do the changes step by step. There will be a lot of one click apps on the MK3 that you can use if you are worried about coding.
|
|
|
Post by j19c4rr on Sept 5, 2021 10:37:07 GMT
Hi does anyone know if the following has been done. I have a 2018 Leon FR. Currently when I turn lights from 0 to side lights the sat nav on Android auto (Google maps) goes to night mode, I don't want it to. The dashboard dials also don't light up till full beams are turned on but I want them lit up on side lights. Thanks in advance Any update on getting the dash lights to come on with side lights?
|
|
|
Post by mrcoding on Apr 16, 2022 1:36:00 GMT
can anyone tell me how to code it please?
|
|
|
Post by slavixs on Oct 4, 2022 5:43:40 GMT
Automatic rear wiper when front wipers are at continue mode.
Control Unit 09 (Central Electrics) > Adaptation > Rear window wiper > Automatisches Heckwischen: switch to "active" On my seat by default it was not active, on skoda kodiaq it was active by default...
ACC overtaking on right lane... Control Unit 13 (Adaptive Cruise Control) -> Security access: 20103 -> Long coding -> Overtaking_right_prevention: switch to "deavtivated", by default it is "activated"
|
|
jays
New Member
Posts: 2
|
Post by jays on May 27, 2023 9:22:50 GMT
Hi gents, i was wondering if there already coding or one-click-app available to have the headlight DRL turned off automatically when headlight is turned on, instead having both front DRL and dimlight on at same time for Seat Leon 5F facelift (2020). For personally i think visually it would be more nicer looking only having front led DRL turned on during daylight and only led dimlights turned on without the led DRL at front during night. Apology if i have missed this so please share the link if you dont mind for i am kind of new on this obdeleven forum. Appreciate all the help. JayS
|
|
|
Post by curious31 on Sept 8, 2023 16:42:18 GMT
Hi all, new to Seat, Cupra - the last of the facelift cars (2020) and have two quick ones: - is there a way to "remember" the last start/stop state? So, I do not want to disable it but just retain the last "selection" - as possible on A6 C7 for example? - can the parking brake engage when DSG is put to park?
Thanks!
|
|
|
Post by przebiegly on Sept 9, 2023 6:11:19 GMT
start/stop memory/last setting only possible in audi - in leon 5F memory/last setting with coding is not possible but you can buy the "extra module" from *aliexpress for memory/last setting function. Additionally Leon 5F from 2020 not possible to disable start/stop with coding (newest software)
EPB - turn on Autohold and when you turn off the ignition the electric parking brake is engage automatically
|
|
|
Post by curious31 on Sept 11, 2023 8:08:02 GMT
Thank you przebiegly ! Do you happen to have a link for the "extra module"?
|
|
|
Post by przebiegly on Sept 11, 2023 14:53:37 GMT
|
|
|
Post by casterina on Oct 25, 2023 10:38:32 GMT
I have enabled the below for a lock acoustic confirmation sound from the alarm but there is no beep when locking, have I missed a setting? Akustische Rueckmeldung verriegeln - activate Dauer der Akustischen Rueckmeldung vom Einfachhorn - kurtz
|
|
yero
New Member
Posts: 23
|
Post by yero on Nov 11, 2023 9:04:30 GMT
Try to change Akustische rueckmeldung global - active
|
|
|
Post by callliope on Dec 18, 2023 21:42:01 GMT
EPB - turn on Autohold and when you turn off the ignition the electric parking brake is engage automatically How can we do this? it seems really good idea.
|
|
|
Post by przebiegly on Dec 19, 2023 13:05:40 GMT
if you have electric park brake just turn on autohold
|
|
|
Post by callliope on Dec 19, 2023 20:21:19 GMT
The problem is that rear brake disc wear off 2 times faster than front ones if you use autohold ^_^ and then if you go in a car without auto hold you will let the brake away because of being used in autohold. So i don't use autohold
|
|
|
Post by przebiegly on Dec 19, 2023 20:32:16 GMT
I did not notice any faster wear of the rear discs. I have had auto hold on since I picked up the car from the dealer
|
|