i just upgraded my 2016 F3 with a rain-sensor. The mounting on the windshield was not a big deal because of the existing socket. I coded a few things i found in other forums and tested with a water-sprayer and my Hand, if the sensor works correctly with rain and light.
...and i thought it works fine... till now. Drove in the rain and the Wipers were not activated when windshield was very wet and the time they worked, they were still on when the windshield was dry.
My thoughts are, that the sensor (which can fit into a lot of cars like Golf, Oktavia, etc) is not coded to the fabia windshield. I think the raindrops are not interpreted correctly by the sensor.
Can anybody tell me if or better where i can code the slave coding (00185E) for the new Sensor?
Quote from a manual from another forum: ...A full auto-scan is made and the sensor now appears as a slave under Module 09. The coding (00185E) for the new sensor can be added: Module 09 - coding - use the dropdown and find the new sensor - type in the code...
I did not find a way to do that with OBD11, but maybe one of you did?
My problem is, that the the Sensor does not appear as a slave Module in the List of the Control units. If it would be there, i could open the Sensor-unit and choose "coding" and enter the Code mentioned in my last post (00185E).
Does anyone have a clue how to let the Sensor appear in the Lists of control units??
I think that this problem could be fixed only with VAG-COM, because a rain sensor will not magically appear as a new unit in the list of control units as a rain sensor is only an extension to an existing unit.
Skoda Fabia II Ambiente 1.2 HTP 44 kW BBM (model year 2008)
I connected my car to an VCDS and opened Module 09. Pressed "coding" and chose the RLS Sensor from the dropdown-List. In the new window is a List of cars the Sensor can be mounted in. Chose the right car and the above mentioned Code (00185E for Skoda Fabia NJ) is displayed. Finished.
mrmike: Solution was to remove the app from phone and reinstall it
Aug 11, 2022 20:09:26 GMT
mrmike: Support did not give me the answer
Aug 11, 2022 20:09:33 GMT
whataboutthis: mrmike go back to support and tell them you tried this and it dont work, make sure your IOS and Android version are supported, Location is turned on, unpair all other devices from you phone and try again
Aug 12, 2022 7:27:12 GMT
whataboutthis: and go to Device in the app and remove all devices and try again.
Aug 12, 2022 7:28:15 GMT
mrmike: Great. Now i've got a "B17D7F0 - Adaptation Invalid" error code after i tried to change headlamp washer delay
Aug 13, 2022 13:51:06 GMT
giannimartino: Hello, I am looking to temporarily disable my passenger airbag. Is it possible to disable the airbag without causing any issues with the battery. If so, would it be the "Key Switch" in the adaptation menu? Or is it a different option. Thank you,
Aug 14, 2022 17:14:25 GMT
mushfik08: how do i clear a static fault code?
Aug 14, 2022 23:14:55 GMT
supermen892: Help MMI RS monitor menu VAGCOM activate code
Aug 16, 2022 6:34:02 GMT
bkennedy5359: Anyone successfully disable the backup alarm on a 2018 Audi Q5? Other programming has worked but this does not.
Aug 16, 2022 16:30:03 GMT
phildoublell: does anyone now why my brakes applied (on their own) when driving after changing brake master cylinder and bleeding fluid ...
Aug 17, 2022 9:09:31 GMT