|
|
Post by frankhmila on Dec 30, 2022 12:58:47 GMT
Dear,
as a lot of us, i've the adaptive cruise control (ACC) and the Active line assist with cross line alert, but i need to know if possible to have the ACA, the adaptive cruise assist, that retain the car in the middle of the road nad drive like the other pilot system.
Tha opt is in the (PY7) Adavanced Assistence packet that cost only 150.- (CHF in Switzwerland) more than the (PYL) Plus Assistence packet and i think is only a software merge of the two thing s that i have.
Someone have try some coding?
|
|
|
|
Post by frankhmila on Jan 3, 2023 14:14:52 GMT
I see that is available for the e-Tron, then i hope that will be available also for the Q4!
|
|
fonco
New Member
Posts: 4
|
Post by fonco on Apr 7, 2023 13:50:55 GMT
Dear,
as a lot of us, i've the adaptive cruise control (ACC) and the Active line assist with cross line alert, but i need to know if possible to have the ACA, the adaptive cruise assist, that retain the car in the middle of the road nad drive like the other pilot system.
Tha opt is in the (PY7) Adavanced Assistence packet that cost only 150.- (CHF in Switzwerland) more than the (PYL) Plus Assistence packet and i think is only a software merge of the two thing s that i have.
Someone have try some coding?
You can find it now in the app, |
|
|
|
Post by mefiues on Jun 3, 2023 21:36:05 GMT
I cant find it on the app, OBDEleven deleted it ?
|
|
|
|
Post by zav13r on Jan 28, 2024 10:35:06 GMT
I'm interested in this too.. can anyone share the long coding to enable ACA?
|
|
carma
New Member
Posts: 7
|
Post by carma on Jan 29, 2024 14:40:52 GMT
This one seems to be working for my Q4, but without the KLR (captive steering wheel) it's rather useless...
1. Enter module ‘A5 Driver assistance’
2. Select ‘Long Coding’
3. Select ‘HC_point_of_intervention’
4. Set value to ‘early_setting_over_menu’
5. Select ‘Aldw’
6. Set value to ‘Coded’
7. Apply changes
8. Enter module ‘5F Multimedia’
9. Select ‘Adaption’
10. Select ‘Vehicle function list BAP’
11. Select ‘LDW HCA 0x19’
12. Set value to ‘Activeted’
13. Select ‘LDW_HCA_0x19_msg_bus’
14. Set value to ‘Databus extended’
15. Apply changes
16. Enter module ‘17 Dashboard’
17. Select ‘Long Coding’
18. Select ‘Lane assist’
19. Set value to ‘Yes’
20. Select ‘Lane retentions assist BAP distance’
21. Set value to ’Yes’
22. Apply changes
23. Disconnect ODB device
24. Lock and leave car for 20 min.
25. Clear all errors and go for a ride (toggle guidance on/off on the indicator end button)
|
|
