namac
New Member
Posts: 1
|
Post by namac on May 24, 2017 1:05:00 GMT
Hello everyone. I'm very new to modifying the MMI in my 2013 a7 however I was curious if anyone could guide me on the two mods I would like to enact in my car. I have a 2013 A7 and am in the US. I have every option in the car and it seems that with the forward facing camera for lane assist you have the ability to also enable high beam assist which seems to be an EU only option. I've seen several threads to this effect but didn't know if someone could, again, guide me a bit.
The second mod I would like to enact is the addition of the early or late intervention of the lane assist in MMI. I've seen several forums with this enabled as an option in MMI but don't know that I have sen anything straight forward enough for me.
Thank you to anyone that can help and I look forward to participating here with my OBDEleven.
|
|
|
Post by phantoma6 on Aug 29, 2017 20:58:57 GMT
Not sure if by Lane Assist you are referring to Lane Departure - wherein the car keeps you from drifting into another lane, right or left. If this is what you are referring to, then you will have to have the hardware option installed in the form of 2 radars, left and right, installed in place of fog lights. If you look at the front bumper and see fog lights, you do not have Lane Departure. No coding will make if happen.
|
|
|
Post by schultz on Mar 1, 2020 14:42:10 GMT
I have a 2013 with the camera and radar sensors used for the apative start/stop cruise control. I don't have the lane depart button on the windshield washer stick. So can it be turned on? If so is it always on then?
|
|