|
1.9.7
Oct 10, 2022 11:44:21 GMT
Post by Justinas on Oct 10, 2022 11:44:21 GMT
Use the following format to report bugs
Description of bug: your bug description iOS software version: your IOS version Phone: your apple phone model Car: your vehicle brand, model and year User email: your user email of the OBDeleven application.
Changelog
v1.9.7
- Changed the app icon, to separate the VAG app from the BMW app
|
|
|
1.9.7
Oct 13, 2022 21:45:29 GMT
Post by plateump on Oct 13, 2022 21:45:29 GMT
Description of bug: I see the BMW cars in my Garage in the VW App iOS software version: 16.1 Phone: SE (2nd) Car: doesn't matter User email: email provided on request
|
|
mr-fix
Junior Member
Posts: 86
|
1.9.7
Oct 14, 2022 14:18:56 GMT
Post by mr-fix on Oct 14, 2022 14:18:56 GMT
Description of bug: Coding string in iOS app is incomplete (FB 16 instead of FB 16 00 00). At the same time Android app shows coding from this module correctly. iOS software version: 16.0.3 Phone: iPhone 11Car: Audi A7 (4G) 2016, module 0x85 (on-board camera) User email: email provided on request This issue was reported in February 2022, iOS app version 1.8.0, was not addressed since. Here's the original report: forum.obdeleven.com/post/64460
|
|
mr-fix
Junior Member
Posts: 86
|
1.9.7
Oct 14, 2022 14:26:05 GMT
Post by mr-fix on Oct 14, 2022 14:26:05 GMT
Description of bug: OCA app builder (web app app.obdeleven.com/build-app) does not allow to save HEX values in parameterization and EEPROM. iOS software version: N/A Phone: N/A Car: N/A User email: email provided on request When trying to save HEX values in parameterization, I get an error about invalid data. When trying to save DEC values in parameterization, app builder validates it correctly. When trying to input HEX value in EEPROM, app builder does not allow me to type/paste. Only 0-9 characters are accepted. Also, since part of the OBDeleven functionality is based on a web app, it would be a good idea to create separate category for web app feedbacks. Description of bug: When trying to save new adaptation value in module 5F, channel: Confirmation of installation change, app gets stuck. Can't save new value, does not show error, just spins the activity wheel. iOS software version: 16.0.3 Phone: iPhone 11 Car: Seat Ateca with MHI2 unit, but the same thing goes for other MIB units. User email: email provided on request
|
|
bx3m
New Member
Posts: 3
|
1.9.7
Oct 19, 2022 9:17:10 GMT
Post by bx3m on Oct 19, 2022 9:17:10 GMT
Description of bug: App starts and has a "Firmware update" message for 1/2 second, don't have enough time to click, then I get a message about restoring digital content but nothing shows except an option button; after this, the car is not automatically identified, it takes a long time to get to the part where I can click on the car in my garage; after this, "reading control units" takes a very long time and most times it fails; I have connected to a similar cat with mine and it was unable to identify it. Basically, it is un-usable, because even if I get to the part where I can scan the ECU I get some bogus error messages that I cannot even delete iOS software version: 16.0.3 Phone: iPhone 13 Pro Max Car: Audi A6 C7 2013 User email: email provided on request
|
|
|
1.9.7
Oct 24, 2022 7:26:19 GMT
Post by OBDeleven on Oct 24, 2022 7:26:19 GMT
Description of bug: Coding string in iOS app is incomplete (FB 16 instead of FB 16 00 00). At the same time Android app shows coding from this module correctly. iOS software version: 16.0.3 Phone: iPhone 11Car: Audi A7 (4G) 2016, module 0x85 (on-board camera) User email: email provided on request This issue was reported in February 2022, iOS app version 1.8.0, was not addressed since. Here's the original report: forum.obdeleven.com/post/64460 Description of bug: OCA app builder (web app app.obdeleven.com/build-app) does not allow to save HEX values in parameterization and EEPROM. iOS software version: N/A Phone: N/A Car: N/A User email: email provided on request When trying to save HEX values in parameterization, I get an error about invalid data. When trying to save DEC values in parameterization, app builder validates it correctly. When trying to input HEX value in EEPROM, app builder does not allow me to type/paste. Only 0-9 characters are accepted. Also, since part of the OBDeleven functionality is based on a web app, it would be a good idea to create separate category for web app feedbacks. Description of bug: When trying to save new adaptation value in module 5F, channel: Confirmation of installation change, app gets stuck. Can't save new value, does not show error, just spins the activity wheel. iOS software version: 16.0.3 Phone: iPhone 11 Car: Seat Ateca with MHI2 unit, but the same thing goes for other MIB units. User email: email provided on request Thank for reporting to us. We are already working on this matter.
|
|
|
1.9.7
Oct 24, 2022 7:27:11 GMT
bx3m likes this
Post by OBDeleven on Oct 24, 2022 7:27:11 GMT
Description of bug: App starts and has a "Firmware update" message for 1/2 second, don't have enough time to click, then I get a message about restoring digital content but nothing shows except an option button; after this, the car is not automatically identified, it takes a long time to get to the part where I can click on the car in my garage; after this, "reading control units" takes a very long time and most times it fails; I have connected to a similar cat with mine and it was unable to identify it. Basically, it is un-usable, because even if I get to the part where I can scan the ECU I get some bogus error messages that I cannot even delete iOS software version: 16.0.3 Phone: iPhone 13 Pro Max Car: Audi A6 C7 2013 User email: email provided on request Please, contact Customer Support via your OBDeleven application by pressing help and providing all the needed information.
|
|