|
|
Post by bigtam on Feb 1, 2017 20:44:19 GMT
GPS ariel a magnetic 1 in passengers window pillar
|
|
harry
New Member
Posts: 43 
|
Post by harry on Feb 2, 2017 8:05:09 GMT
For some reason only works with 1 of my keys very strange Perhaps restore back to original and recode ? |
|
|
|
Post by Moes on Feb 4, 2017 8:31:23 GMT
GPS ariel a magnetic 1 in passengers window pillar thanks. |
|
|
|
Post by bigtam on Feb 9, 2017 17:40:37 GMT
For some reason only works with 1 of my keys very strange Perhaps restore back to original and recode ? Sorted done just that cheers |
|
|
|
Post by bigtam on Feb 9, 2017 17:44:09 GMT
|
|
harry
New Member
Posts: 43
|
Post by harry on Feb 11, 2017 6:10:04 GMT
Hi.
Can anyone translate this to OBDEleven speak ? The USB port on my car won't recognise my iPhone/iPod...
USB input change behavior
With this mod you can change the behavior of USB, IPOD, or just Full load mode even disable it.
1 - Module 5F - Electronic Information 1. Code (20103)
2 - Extended Code (Text mode)
3 - Byte 19 USB
4 - Select one of four options:
- USB-IPOD (default)
- Off
- Charge
- Full
|
|
|
|
Post by Gtsportms on Feb 15, 2017 17:58:11 GMT
Oh my good; 6r and 6c are completely different in coding
Stop posting bullshit
|
|
|
|
Post by vincentdevos on Mar 5, 2017 12:08:37 GMT
I'm trying to enable the pointer test but i can't get it done...
Pointer Test
Select Control unit 17 (Dashboard)
Adaptation
Channel staging'i Seçin
Select Value:Active
I don't understand this part:staging'i Seçin. Is there someone with the same probleem or is it Just me?
|
|
|
|
Post by Bawolo on Dec 25, 2017 18:52:06 GMT
Hello everyone.
I am looking for a security access code to 01-engine, for the VW Polo 6R, 2010, 1.2 TSI, CBZB.
Can anyone help me? Please
|
|
|
|
Post by adrdbr on May 17, 2018 8:11:39 GMT
Hi guys,
Anyone knows what or if there is an option to enable the fuel consumption indicator for Polo 6R 2013 1.4 85HP?
Thanks
|
|
|
|
Post by bmpsycho on Feb 10, 2019 20:03:31 GMT
Hello
Need help to find out bellow tweaks: (Polo 6R GTI 1.4 DSG7 180HP 2013) ...
* the throttle pedal response (Direct Acceleration) - how to switch driver profile to -> B
* ABS module Start vibration reduction
* One Tap Doors+Windows+Sunroof Auto Close from remote
* DRL LED's switch off when the handbrake is up.
* The volume of fuel required to refuel displayed in MFD.
|
|
dtr
New Member
Posts: 1
|
Post by dtr on May 4, 2019 15:20:00 GMT
Hi got a 6r 1.4 GTI just wondering how to do the pointer test/indicator celebration thanks
|
|
|
|
Post by tomasz on Jun 19, 2019 6:01:21 GMT
The emergency Breaking light code doesnt work for my polo 2014 6r. Any ideas about what the problem could be?
Tried both manual coding and the application and none of them work.
|
|
|
|
Post by s0undvision on Jul 9, 2019 17:07:07 GMT
How to do needle sweep on 6R 1.2TSI
|
|
|
|
Post by tomasz on Oct 4, 2019 10:53:32 GMT
I used the DRL coding on my polo 1.2TSI 2014 6R.
Before coding DRL on my car, the "foglights (or the daytimeruning lights) were on during the day but the taillights weren't.
So after the coding i got taillights + foglights + the parking/side lights on.
Is there a possibility to switch off the parking/side lights whilst using the DRL code or do i simply have to "destroy" the bulbs for them to not shine?
|
|
|
|
Post by crazyrobot321 on Sept 30, 2020 11:14:32 GMT
What is the security code for Dashboard adaptions? I don't have any adaptions in my dashboard unit
|
|
andru
New Member
Posts: 3
|
Post by andru on Oct 22, 2020 15:34:13 GMT
Has one the coding for oil temperature on display in the Fis
|
|
|
|
Post by crazyrobot321 on May 31, 2021 16:17:12 GMT
Needle Sweeping
Select Control unit 17 (Dashboard)
Adaptation
Channel indicator_celebration
Select Value:Active
|
|
|
|
Post by rooshevn on Nov 21, 2021 9:51:47 GMT
How to code fogs with drl when switch in 0 position?
|
|
|
|
Post by andrea0825 on Dec 2, 2022 10:40:50 GMT
ciao a tutti
è possibile codifica le centraline dei finestrini ?
Non mantengono più la memoria di fine corsa
grazie
Hello everybody
is it possible to code the control units of the windows ?
They no longer keep the end of stroke memory
thank you
|
|
|
|
Post by theking021 on Sept 15, 2024 11:51:14 GMT
Hey guys, i have a 6C GTI 2010. Want to increase rpm slightly via VCDS however when i click Engine>Security code and i input the code, its denied. Am i doing something wrong or using a wrong code for this car?
How do i access the Engine Idle RPM Adaptation? Any help would be appreciated. Thanks in advance.
|
|
