|
Post by ianmac on Sept 17, 2022 17:17:52 GMT
When attempting to Long Code with OBDeleven, v1.9.6, on an iPhone, specifically to integrate an RCD330 headunit in a 2006 VW EOS, I see several options, for example selecting a Fender or Skoda sound system, but when I attempt to long code these the message "Function Not Available" is presented. This occurs when using the Long Coding helper or when trying to adjust individual bites. Does this mean;
1. The OBDeleven app is not capable of performing this function (but may in the future) or,
2. The Long Coding function is not available in the current iOS version of the OBDeleven app, but is available in the android version.
3. OBDeleven is presenting long coding options that the 'Control Unit' (in this case an RDC330) is not capable of accepting. (in this case my control unit, the RCD330 is supposed to accept this coding)
Thank you!
|
|
|
Post by carbonchaos on Sept 18, 2022 8:31:19 GMT
Basically it’s 3 but could equally be …
4 . Coding conditions have not been met, ie volts too low ,engine running , bonnet or doors open etc etc
|
|