|
Post by mrchubba on Jun 9, 2022 13:38:49 GMT
A6 C6 4F 3.0 TDI - very new to OBDeleven and coding etc Hi All, I have recently replaced my original battery and I I'm getting a number of issues and fault codes: 02252, 02479, U1007 and the battery light comes on at low revs - The Battery % scale does not always work and just sits at 10%. I have tried to look at recoding the battery but this doesn't seem to be an option for me on either IOS or Android via Amazon Fire on GooglePlay - the menu options seem to be a lot different to what I have seen on YouTube and Google and I am unable to change values etc. I'm also getting: I've also got to this page and have no idea what to enter: And when I select 30 here I should have another box to enter a new value and this doesn't happen: Many thanks for your help all
|
|
|
Post by swalker86 on Jun 10, 2022 7:39:09 GMT
Right so this is the #1 question on here. what protocol are you running? ie what age is your BCM. some do not require programming and the fact that your byte 30 is empty would suggest this. where did you get "this" page?
from the fault codes it looks like you could have a faulty BCM. i had to replace mine out due to being told my battery was always low. was your old battery tested? did it die overnight or did you just get the low battery warning? the fault with mine was that i was getting a small amount of water in the spare wheel well which lead to corrosion on the BCM contacts. have you checked and cleaned these?
|
|