|
|
Post by Kremlin on Mar 28, 2021 17:25:30 GMT
Look @ history what u have changed.
|
|
|
|
Post by zomk7gti on Mar 30, 2021 1:45:58 GMT
Any coding and adaptations for MMI settings in motion? My Mk7 says it’s not supported on the app
|
|
mbel
New Member
Posts: 2
|
Post by mbel on May 15, 2021 19:25:29 GMT
I can't get this one working because I don't even have "Control unit 10". Does anyone knows why? Can anybody confirm that this works on A4 B8.5 2014 with rear sensors and MMI? Activation of Audi Parking System Select Control unit 10 (parking aid) Control unit access authorization - Seçim function 16 Access Code: 71679 Coding Byte 2 Bit 0 - visual representation of parking assistance - activate |
|
ym
New Member
Posts: 1
|
Post by ym on May 19, 2021 19:21:59 GMT
How to enable Audi A4 American parking
|
|
|
|
Post by a6allrd27t on Jun 8, 2021 18:52:55 GMT
Confort Blink Cycle Select Control unit 09 (Central Electrics) Security access Access Code 20113 Adaptation Comfort Sinyal Sayısı (Cycles) Value: 1-5 Value 3 (standard - 3x blinking)
Pertinent information:
I have a 2014 Audi S4 US version
I am using OBDeleven Pro version for Android
Question on this coding issue noted above:
For step 5 ,Comfort Sinyal Sayısı (Cycles), what channel in Adaptation should we see this value of 3? I have checked all 255 channels and did not see a value of 3 or a specific title that noted it was for the comfort blink cycle. Now, what I did see was that, in "Live Data" on channel 13 and 14 you can see values change when you moved up or down your traffic signal arm. Unfortunately, I could not see it active in adaptations or anywhere in Long Coding. If you have an other specific channel information concerning this setting, please let me know.
Thanks, OBDeleven Host
|
|
|
|
Post by jessica on Aug 14, 2021 12:26:12 GMT
Hi, and what in the hell is bit 5:?
Control unit 09 (Central Electrics)
Control unit Long Coding
Byte 5
Bit 5
What does that bit?
Thanks
|
|
|
|
Post by kostikgo20 on Aug 22, 2021 15:56:13 GMT
I have a question about deactivation of Start-Stop function. Unfortunatly the "adoptation" is not available. I select "can Gateway" ( Control unit 19) and dont have adoptation there. Available are following points: Subsystems, live data, Long coding, Long adoptation, basic settings, Output Test... How can i change start-stop voltage limit? Thank you and sorry for my english  |
|
|
|
Post by pastissimo on Sept 17, 2021 15:24:22 GMT
Hello,
I see a lot of questions here but no repply. Before posting, i was wondering if repplies were in private message or if they didn't exsits...?
Thanks
|
|
juhis
New Member
Posts: 1
|
Post by juhis on Sept 21, 2021 17:01:58 GMT
Hi. I was wondering why there are two different instrutions about byte 16 and wich one is right?
Emergency Break/Flashing Lights
Select Control unit 09 (Central Electrics)
Control unit Long Coding
Byte 16
Bit 1 Activate
Bit 2 Activate
Electronic central unit 09
Byte 16, Bit 0 = front fotwell lights
Bit 1 = rear footwell lights
Bit 6 = interior lights adaptation
And i was trying to activate emergency brake lights but now im not sure if i just activated footwel lights.
|
|
|
|
Post by masmaz61 on Dec 27, 2021 13:01:17 GMT
these encodings are also good for the 2018 A4 B9 8w ??
|
|
|
|
Post by buttarblades on Jan 14, 2022 14:43:47 GMT
Does anyone have the default settings in 5F for a 21 S5 SB prestige? I unblocked a few that shouldn’t have been
|
|
|
|
Post by baubaumx660mx on Jan 16, 2022 20:14:56 GMT
Hi Guys,
Does anyone know how to Long code the shift paddles for an Audi A4 B8 2.0 TDI multitronic?
I would like to install them shortly.
|
|
mush
New Member
Posts: 11
|
Post by mush on May 19, 2022 23:00:32 GMT
Where I can find the channel 63,64,65 in the 5F control unit ?
|
|
|
|
Post by audia42012 on Dec 25, 2023 14:28:12 GMT
Hi does anyone have the coding adaptations for changing halogen tail lights on Audi A4 B8.5 saloon 2012 to led tail lights from s line model?
I have the lights in with adapters but they aren’t coded properly to illuminate the correct lights.
Any help would be hugely appreciated.
Thanks
|
|
|
|
Post by miki81 on Apr 1, 2024 9:52:02 GMT
Hello admin . I am interested to turn off the open door chime when engine is running, i have read here all the adaptation but there is nothing about this. I have an A4 b8 from 2012 . A little help would be much appreciated !
|
|
