|
|
Post by obcek2 on Feb 12, 2018 21:53:41 GMT
Hi, November 2017, bought in January 2018 I put my configuration in ODBEleven: In some page I have seen some options with VAG COM for hability this extra. Is it possible that I have to activate that? (I dont know if I can with Odbeleven or it is necesary)  Thank you cupra280 for your help and time!!! |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 12, 2018 23:23:07 GMT
Are you able to do long coding on control unit 09 central electrics or is the coding 0000000000000
this is my cars setup but i don't have sliding roof but the rest does work. i have highlighted the differences that are obvious to me.
as i dont have your car dont want to advise you to copy mine but i would certainly try changing
Komfortbedienung global: to active and see if that helps.
¿Puede hacer una codificación larga en la unidad de control 09 central eléctrica o es la codificación 0000000000000
esta es la configuración de mis autos pero no tengo techo deslizante pero el resto funciona. He resaltado las diferencias que son obvias para mí.
ya que no tengo su auto no quiero aconsejarle que copie el mío, pero sin duda trataría de cambiar
Komfortbedienung global: para activar y ver si eso ayuda.
Access control 2:
Komfortbedienung global:
active
Comfort opening:
active
Comfort closing:
active
Komfortoeffnen nur FH Fahrertuer:
active
Schliesszylinder Komfort oeffnen:
active
Schliesszylinder Komfort schliessen:
active
SAD Richtung Komfortoeffnen:
open
SAD Komfort schliessen:
active
SAD Komfort oeffnen:
active
Freigabenachlauf FH bei Kl 15 aus:
active
Freigabenachlauf FH bei Tueroeffnen abbrechen:
active
Spiegelabsenkung bei Rueckwaertsfahrt:
active
Funk Komfort schliessen:
active
Funk Komfort oeffnen:
active
Kessy Komfort oeffnen:
Yes
Kessy Komfort schliessen:
Yes
Kessy Komfortbedienung Reichweitenbegrenzung:
Yes
Spiegelverstellung Synchron:
active
Menuesteuerung Spiegelabsenkung:
active
Funk Spiegelanklappen:
active
Menuesteuerung synchrone Spiegelverstellung:
active
Menuesteuerung Funk Spiegel anklappen:
active
Menuesteuerung Komfortbedienung einstellbar:
adjustable
Menuesteuerung Regenschliessen:
not active
SAD PreCrash Konturschliessen:
not active
FH SAD Kl15Aus Freigabezeit:
600 s
Fahrertuerbedienung Fensterheber oeffnen:
active
Fahrertuerbedienung Fensterheber schliessen:
active
Funk Spiegelanklappung Modus:
by look command via remote control key
Nachsaven_nach_Verdecklauf:
not active
Regenschliessen_ein_aus:
not active
Regenschliessen_art:
permanent
Remote_Unlock_Lock :
not_active
Profilfunktion für Anklappung der Außenspiegel:
not active
Signalisierung_Spiegelanklappung:
active
virtuelles_pedal:
not active
virtuelles_pedal_HMI_einstellbar:
not active
|
|
|
|
Post by obcek2 on Feb 14, 2018 7:58:09 GMT
Hi,
yesterday I put the configuration like you (cupra280) and I've got up and down the driver windows (from fob and from kessy button) !! Only that window at the moment but is a beginning!
Today I will try to do a reset of all windows (yesterday didn't have a lot of time) and I will continue trying it. I will put here my results
Regards!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 14, 2018 8:18:41 GMT
good news on my car there is a menu option that sets it to drivers window only or all. have you got that
Buenas noticias en mi auto. Hay una opción de menú que lo configura solo en la ventana de los conductores o en todos. Entendiste eso
|
|
|
|
Post by obcek2 on Feb 15, 2018 6:48:23 GMT
Yeah, this option its in my car and I select 'All doors'.
Yesterday I tried solve the problem doing reset to windows (down window hold button 5 seconds, then up window hold button other 5 seconds and push the botton 5 seconds more to up) but nothing changed... Only driver's window is open or close...
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 15, 2018 8:13:53 GMT
|
|
|
|
Post by obcek2 on Feb 15, 2018 22:54:34 GMT
I will try it but I dont know why obdeleven app can't send to my email the backups that I do... Other things yes, but backups no... Its a little strange
If I dont, I will make some captures...
|
|
|
|
Post by obcek2 on Feb 17, 2018 11:23:44 GMT
Hi Cupra280! I send you a private message with a link to my Google Drive for you see the backup!
Thank you very much!!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 17, 2018 23:03:10 GMT
Hi Cupra280! I send you a private message with a link to my Google Drive for you see the backup! Thank you very much!! got it thanks. will look at this onsunday |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 17, 2018 23:19:26 GMT
I will try it but I dont know why obdeleven app can't send to my email the backups that I do... Other things yes, but backups no... Its a little strange If I dont, I will make some captures... Seperate issue about emailing backups, what version of Android are you using is it 8.0 |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 18, 2018 15:54:00 GMT
I have checked it and where we have the same setup both cars are the same, just seen this on another site can you try this and see if it helps.
One-touch opening and closing*
One-touch opening and closing means you
do not have to hold down the button.
Buttons ››› Fig. 137 1 , 2 , 3 and 4 have
two positions for opening windows and two
for closing them. This makes it easier to open
and close windows to the desired position.
One-touch closing
– Pull up the window button briefly up to the
second position. The window closes fully.
One-touch opening
– Push down the window button briefly up to
the second position. The window opens
fully.
Restoring one-touch opening and closing
The automatic open and close function will
not work if the battery has been temporarily
disconnected. The function can be restored
as follows:
– Close the window as far as it will go by lifting
and holding the electric window switch.
– Release the switch and then lift it again for
1 second. This will re-enable the automatic
function.
If you push (or pull) a button to the first
stage, the window will open (or close) until
you release the button. If you push or lift the
button briefly to the second stage, the window
will open (one-touch opening) or close
(one-touch closing) automatically. If you operate
the button while the window is opening
or closing, it stops at this position.
Lo he comprobado y donde tenemos la misma configuración, los dos autos son iguales, acabo de ver esto en otro sitio, puedes probar esto y ver si te ayuda.
One-touch de apertura y cierre *
Abrir y cerrar con un solo toque significa que
no tiene que mantener presionado el botón.
Botones >>> Fig. 137 1, 2, 3 y 4 tienen
dos posiciones para abrir ventanas y dos
para cerrarlos Esto hace que sea más fácil abrir
y cierre las ventanas a la posición deseada.
Cierre de un toque
- Tire hacia arriba del botón de la ventana brevemente hasta
segunda posición. La ventana se cierra completamente.
Apertura de un toque
- Presione brevemente el botón de la ventana hacia arriba para
la segunda posición. La ventana se abre
completamente.
Restauración de apertura y cierre de un toque
La función de abrir y cerrar automática
no funciona si la batería ha sido temporalmente
desconectado. La función puede ser restaurada
como sigue:
- Cierre la ventana tanto como sea posible levantando
y sosteniendo el interruptor de la ventana eléctrica.
- Suelte el interruptor y luego levántelo nuevamente para
1 segundo. Esto volverá a habilitar el automático
función.
Si presiona (o tira) un botón hacia la primera
etapa, la ventana se abrirá (o cerrará) hasta
sueltas el botón. Si empuja o levanta el
botón brevemente a la segunda etapa, la ventana
se abrirá (apertura de un toque) o cerrará
(un toque de cierre) automáticamente. Si opera
el botón mientras se abre la ventana
o cerrando, se detiene en esta posición.
|
|
|
|
Post by obcek2 on Feb 19, 2018 7:42:32 GMT
Hi!. My Android version is 8.1.0 from Nexus 5x I've obtained the backup from the history.txt from the cache folder of the app...but the action to send to my email is not working for backups (working for logs or other but I dont know why, for backups no...) I already probed reset the windows with this system but still no working : Press and hold-down the down button for at least 3 seconds after the windows are fully open (i.e. in the down-position Press and hold down the up button for at least 3 seconds after the windows are fully closed (i.e. in the up-position) Repeat a few times, then try comfort/convenience opening Something it will be, but its posible than only a Seat Mechanich it knows  Thank you Cupra! |
|
|
|
Post by sparrogul on Mar 23, 2018 13:42:50 GMT
Buenas alguien sabría decirme cómo activar el toque de claxon para cuando cierro el coche y lo abro con la llave con el obd11? Muchas gracias soy muy novata
|
|
|
|
Post by papaco on Mar 25, 2018 17:56:11 GMT
Con esto lo activas.
Módulo 09.
Submenú:
Señales de respuesta:
Akustische Rueckmeldung entriegeln:
activado
Akustische Rueckmeldung verriegeln:
activado.
Akustische Rueckmeldung global:
activado
Akustische Rueckmeldung Signalhorn:
activado.
Dauer der Akustischen Rueckmeldung vom Einfachhorn:
normal.
Con esto pones en la pantalla la indicación para poder ponerlos o quitarlos.
Es muy util por si algún día no quieres hacer ruido
Menuesteuerung akustische Rueckmeldung:
activado.
Un saludo.
PD.Pasa por el clubseattoledo y allí tienes cosas interesantes.
|
|
|
|
Post by papitu on Nov 25, 2019 14:54:18 GMT
Hola,
Alguna posibilidad de codificación para que se pueda mostrar la navegación gps activa en Android Auto (Google Maps o Waze) en la pantalla infotaiment de un Seat Tarraco y ver simultaneamente la navegacion gps interna del vehiculo en el Virtual Copckit.
De momento, cuando se activa Google Maps o Waze, aparece un mensaje en el VC bloqueando la visualización.
Muchas gracias
|
|
redi
New Member
Posts: 2
|
Post by redi on Oct 2, 2024 20:21:29 GMT
Im looking for long coding for abs module is it any way i can get the long code for seat cordoba 2013 anyhow?
|
|
