|
Post by wcisme on Mar 29, 2022 16:05:05 GMT
2022 A6 55 TFSI, about 1000 miles on odometer. Have successfully used the OBDeleven Apps to reset several values, but could not get the Gear Number App to work. Currently the Gear Number in Virtual Cockpit shows when in M, or S drive modes. I would like to also see the gear number when driving in the D mode. Using the Gear Display app in a new OBD eleven 2 I saw that it was already set in “D on / S on” but only the “S on” is actually working. I put in the new value of “D on / S off” and that did change the Virtual Cockpit so that I could see the gear numbers when driving in “D” but not when in “S”. I then went back into the app and changed the setting back to “D on / S on” thinking it might reset and show the numbers in both driving modes. It showed that the change was accepted but the gear numbers still don’t show in D mode . Any ideas? Thanks WCISME
|
|
|
Post by kroton on Jun 22, 2022 13:08:59 GMT
Try this, go to 02 Transmission - Adaptations - Single gear display - D on/S on
|
|
|
Post by dezurita07 on Jul 31, 2022 14:58:32 GMT
I had an issue with the “app” as well. The workaround support gave me worked. Here you go…
“Could you try to change the Gear Display manually?
Connect to your vehicle; Open the control unit 02; go to adaptations; Search for 218D and open it. Try to select the willing value and try to apply it.”
|
|
|
Post by Pavel from Czech on Jan 27, 2023 5:31:12 GMT
It works, thanks
|
|
|
Post by mas2030 on Jun 12, 2023 0:24:26 GMT
I have 2019 audi a6 c8. Does it work with my audi since the gear display in the app does not show anything about gear numbering
Would it be possible to use the manual steps above ?
Thanks
|
|
|
Post by mas2030 on Jun 12, 2023 0:25:32 GMT
Try this, go to 02 Transmission - Adaptations - Single gear display - D on/S on Have you managed to solve the gear display numbering with below steps Thanks
|
|
|
Post by mas2030 on Jun 12, 2023 0:26:03 GMT
2022 A6 55 TFSI, about 1000 miles on odometer. Have successfully used the OBDeleven Apps to reset several values, but could not get the Gear Number App to work. Currently the Gear Number in Virtual Cockpit shows when in M, or S drive modes. I would like to also see the gear number when driving in the D mode. Using the Gear Display app in a new OBD eleven 2 I saw that it was already set in “D on / S on” but only the “S on” is actually working. I put in the new value of “D on / S off” and that did change the Virtual Cockpit so that I could see the gear numbers when driving in “D” but not when in “S”. I then went back into the app and changed the setting back to “D on / S on” thinking it might reset and show the numbers in both driving modes. It showed that the change was accepted but the gear numbers still don’t show in D mode . Any ideas? Thanks WCISME View AttachmentDid it work with you below steps. Thanks
|
|