|
|
Post by OBDeleven on Apr 12, 2017 16:42:23 GMT
Hi, to everyone. First of all we apologize for this issue, not always we have access to all available units to test it. This issue affect some control units so it is temporary removed from one click apps section. To fix this issue you will need to follow this steps:
Go to Comfort control unit (46) > security access > enter 16017 > adaptation > channel 188 set new value as 1 > channel 190 set new value as 1021 > go back > security access 20971 > change diagnostic session to development > clear trouble codes
|
|
|
|
Post by Matthew on Apr 12, 2017 18:28:54 GMT
Thanks Admin. I'm sure this will clear up many issues that folks are experiencing. Is there a way to document in the same way you did above, what the various APPs are actually doing? The reason for this is that there are some features for the newer cars like the MK6 Golf that there are no APPs for in the MK5, but I know that the same functionality can be enabled. change diagnostic session to development > clear trouble codes Shouldn't one be able to clear error codes using the normal diagnostic session? |
|
|
|
Post by dadeyen123 on Apr 12, 2017 20:40:01 GMT
Thanks admin for the work you laid down for me and others! Really nice support! So nice having no faults again.  |
|
matt
Closed beta tester
Posts: 48 
|
Post by matt on Apr 12, 2017 23:14:55 GMT
The price of the obdeleven has no relation to its functionality, the developers could have charged 500 for it if they wished. The fact remains, even if it only costs one cent, it must be capable of doing what is advertised, have reasonable support and if it causes damage then the people who made it are responsible.
|
|
|
|
Post by Matthew on Apr 13, 2017 0:04:09 GMT
it must be capable of doing what is advertised, I don't see any advertisements / claims for Ross-Tech - like support. and if it causes damage then the people who made it are responsible. Just like any other product, I'm sure there are disclaimers warning end-users that there are no guarantees and to proceed at your own risk. Holding OBDeleven responsible for a user initialed action, is unreasonable. Admin admitted to a simple mistake, explained the situation, and even went as far as to remove the invalid APP from the menu so that no one else makes the same mistake. Matt, what you are basically saying is that we should hold gun manufacturers responsible when an inexperienced user shoots themselves in the foot (just because the trigger came with a label saying "squeeze me"). The price of the obdeleven has no relation to its functionality I wasn't talking about functionality. I was talking about "support". If I paid you 1-cent per hour, would it cover your personal expenses so that you can in turn give 24-hour support to answer every single question or issue that I have with my car? We all buy these tools, because we don't want to have to do through the dealer when we can do it ourselves. If you ask around, folks buy OBDeleven because they can't afford Ross-Tech's VCDS. Matt, I do recall the discussion you and I had about the throttle-body-calibration for your MK4 Golf. That is something that needs to be addressed, but you have to remember that the OBDelven app is still a work in progress and will be updated when you point these bugs out to Admin and the development team. |
|
dave
New Member
Posts: 7
|
Post by dave on Apr 24, 2017 17:39:19 GMT
Hi, to everyone. First of all we apologize for this issue, not always we have access to all available units to test it. This issue affect some control units so it is temporary removed from one click apps section. To fix this issue you will need to follow this steps: Go to Comfort control unit (46) > security access > enter 16017 > adaptation > channel 188 set new value as 1 > channel 190 set new value as 1021 > go back > security access 20971 > change diagnostic session to development > clear trouble codes just receive my new vag cable....tested this and problem solved thank you |
|
|
|
Post by freelockuk on Feb 10, 2018 19:21:41 GMT
hi guy need help.....was coding led rear lights. was copying the code from a car with led rear lights...... think i made the wrong changes was 46 module changed adaption 190 from what it was to 4 by mistake..warning came the dash key faulty so changed it 7 what my print off said...still had lock fault so changed all changes i had made back still no luck... now when i put the key in the hole nothing at all can hear a relay click but no ignition. checked the faults, had a fault in the key ecu that said check 46. checked 46 and there where 3 faults for ecu that would not clear. so found this in this thread....... Read more: forum.obdeleven.com/thread/1515/calculator-error-after-license-coding#ixzz56jahP9cocarried out this and got the faults to clear but still have no ignition lights. car is now dead and gone too a audi specialist and they are stuck with it too. now have a protection fault in module 9 but they can not wake the car up to remove the protection as there is no ignition. hope somebody can help thanks |
|
|
|
Post by Matthew on Feb 11, 2018 17:53:07 GMT
was copying the code from a car with led rear lights...... That's a huge No-No. As you've realized, the modules can be different among the same model car. Do you have the original coding for your car when you did the initial scan? I'll soon post a link from the Ross-Tech Wiki for you to follow wiki.ross-tech.com/wiki/index.php/Audi_A4/S4/RS4_(8K) |
|
|
|
Post by freelockuk on Feb 11, 2018 21:08:55 GMT
was copying the code from a car with led rear lights...... That's a huge No-No. As you've realized, the modules can be different among the same model car. Do you have the original coding for your car when you did the initial scan? I'll soon post a link from the Ross-Tech Wiki for you to follow wiki.ross-tech.com/wiki/index.php/Audi_A4/S4/RS4_(8K)HI Matthew i do have a copy of the coding before i made the changes. i have returned all coding back as it was but still igntion. thanks |
|
|
|
Post by Matthew on Feb 11, 2018 21:46:41 GMT
wiki.ross-tech.com/wiki/index.php/Audi_A4_(8K)_Comfort_SystemRead the above link. It appears you DELETED your keys resulting in your car not being able to start. If that's the case, then only your dealer can help you at this point. If you still had 1 working key, then you would use VAG-Tacho to get your unique PIN to program other keys (transponders) to work with your car. If your dealer can't help you, then you have to buy a set of keys including key-barrel, door locks, immobilizer and dashboard cluster from a donor vehicle to get your car started again. The downside is that your VIN will now be that of the donor car in some cases. I'm sorry that you have to go through this difficulty. Here in Jamaica, that would be an expensive repair bill as everything for my car can only come from VW Germany.
|
|
|
|
Post by freelockuk on Feb 12, 2018 7:21:32 GMT
wiki.ross-tech.com/wiki/index.php/Audi_A4_(8K)_Comfort_SystemRead the above link. It appears you DELETED your keys resulting in your car not being able to start. If that's the case, then only your dealer can help you at this point. If you still had 1 working key, then you would use VAG-Tacho to get your unique PIN to program other keys (transponders) to work with your car. If your dealer can't help you, then you have to buy a set of keys including key-barrel, door locks, immobilizer and dashboard cluster from a donor vehicle to get your car started again. The downside is that your VIN will now be that of the donor car in some cases. I'm sorry that you have to go through this difficulty. Here in Jamaica, that would be an expensive repair bill as everything for my car can only come from VW Germany. Hi Again keys seem to be ok. when in key module it says 3 keys coded and it tell me what key is in the hole 1..2..3 key. its like the car will not wake up. lock button on the remote does nothing but if i lock the car with the button on the inside of the drivers door. i can open the the with the remote and can still open the boot with boot button on the remote. put the key in the door lock and i can lock and unlock the car and also the total closesure still works with the key in the door. thanks Hi Guys final got my car sorted. had to replace the comfort module. have fitted my rear light and now i need to configure the bulb failure warning and the inner brake lights. does any one know how to do this. have searched the internet but cant seem to find it. found something yesterday about the settings in a hidden menu.? thanks |
|
|
|
Post by coolmccool on Oct 5, 2018 21:17:34 GMT
Hello,
maybe that helps you
Bulb out warnings:
Channel 181: 65535 -> 0 (rear halogen to LED conversion)
Channel 191: 65295 -> 0 (disable all rear bulb out warnings)
Channel 192: 3 -> 2 (disable licence plate bulb out warning)
|
|
|
|
Post by dorada55 on Oct 12, 2018 11:49:05 GMT
All ok. Perfect. Module 46 perfect and funcionando. Thanks. Very good.
|
|
|
|
Post by freelockuk on Dec 2, 2018 16:07:42 GMT
Thank you Hello, maybe that helps you Bulb out warnings: Channel 181: 65535 -> 0 (rear halogen to LED conversion) Channel 191: 65295 -> 0 (disable all rear bulb out warnings) Channel 192: 3 -> 2 (disable licence plate bulb out warning) |
|
