|
|
Post by akkidonz on Mar 12, 2017 14:13:41 GMT
Hello,
I have A6 C7 2012 i need to change the battery. But I am unable to find battery regulation, I tried to add from the gateway list But doesn't work.
|
|
|
|
Post by AudiMS on Apr 2, 2017 17:57:37 GMT
Have you found the control unit 'Battery regulation'? I also have an Audi A6 C7 2012 and I cannot find the control unit 'Battery Regulation' either. Based on the OBDeleven Youtube video 'Audi A4 A5 Q5 Battery adaptation after replace', one can update a new battery by entering Battery Part Number 11 Digits, Battery Vendor 3 Digits and Battery Serial Number 10 Digits to Long adaptation channel 4 of Gateway control unit: Gateway - Long adaptation - Channel 4 - New value - Battery Part Number 11 Digits + space + Battery Vendor 3 Digits + space + Battery Serial Number 10 Digits. However on Audi A6 C7 2012 I get: Gateway - Adaptation - Battery Adaptation - Battery Size + Battery Manufacturer + Battery Serial number'. I can only adapt the battery size in terms of Ah (Amp hours) but not the battery part number value. How to find the control unit 'Battery Regulation' or the 'Long adaptation' in the 'Gateway' control unit to update battery in Audi A6 C7 by entering the Battery Part number value or it's just the way it is on Audi A6 C7 2012? Thanks.  |
|
|
|
Post by a6allrd27t on Nov 5, 2017 22:48:14 GMT
Did you get your BEM code changed with OBDeleven or did you have to go to the dealer or an independent shop. If you were able to get it done with OBDeleven in your A6 please let me know as I have a 2013 A6 in North America which I will need to chnage as well but I am running in to an issue where when I try to go into adaptation it just says "something went wrong and I have tried reboot my device, scan the car and use a security code-20103, and still the same results. Anything you found would be helpful. One other note, I have a 2014 S4 and the BEM code works just fine but it is a Non-UDS Gateway but apparently, in the A6 though it is a UDS Gateway which means the last procedure should allow you to change the BEM code.
|
|
