Post by gotyoumad757 on Dec 29, 2021 18:24:14 GMT
hello all,
i am working on my 2020 GTI SE DSG, car has 15k miles on it
Currently has a code for 20638 (which when you click "G" after the scan takes me to P0638 Throttle Actuator Control Range/Performance.
I tried an adaptation of throttle plate. When i run the adaptation it never says complete or success.
The car is modified with an is38 turbocharger and supporting mods. I did switch out the turbo intake inlet and found a bit of oil in the oem unit. I read that some is normal. I am planning a catch can setup as i belive this might have got the throttle body dirty with setup i am running. My question is, how do i get this code cleared. When i clear it it comes right back or is right back immediately after even if i dont start the car.
All help is appreciated.
i am working on my 2020 GTI SE DSG, car has 15k miles on it
Currently has a code for 20638 (which when you click "G" after the scan takes me to P0638 Throttle Actuator Control Range/Performance.
I tried an adaptation of throttle plate. When i run the adaptation it never says complete or success.
The car is modified with an is38 turbocharger and supporting mods. I did switch out the turbo intake inlet and found a bit of oil in the oem unit. I read that some is normal. I am planning a catch can setup as i belive this might have got the throttle body dirty with setup i am running. My question is, how do i get this code cleared. When i clear it it comes right back or is right back immediately after even if i dont start the car.
All help is appreciated.