|
|
Post by jackytw on Dec 10, 2021 4:12:51 GMT
Hello all
Now my Tiguan DRL is always on while turn signal on. I would like to change DRL to flash when turn signal on. But can not find good example from search.
Below is my export from ODIS(would be same as OBd11), not sure change which channel.
any suggestions welcome, I will try it.
thanks
[VO]_Leuchte4TFL LB4:
[LO]_Lasttyp 4: [VN]_0 - Keine Ansteuerung des Pins durch Konfigurator
[LO]_Lampendefektbitposition 4: 0
[LO]_Fehlerort mittleres Byte DTC-DFCC 4: 0
[LO]_Lichtfunktion A 4: [VO]_nicht aktiv
[LO]_Lichtfunktion B 4: [VO]_nicht aktiv
[LO]_Dimmwert AB 4: 0
[LO]_Lichtansteuerung HD AB 4: [VO]_always
[LO]_Lichtfunktion C 4: [VO]_nicht aktiv
[LO]_Lichtfunktion D 4: [VO]_nicht aktiv
[LO]_Dimmwert CD 4: 0
[LO]_Dimming Direction CD 4: [VO]_maximize
[LO]_Lichtfunktion E 4: [VO]_nicht aktiv
[LO]_Lichtfunktion F 4: [VO]_nicht aktiv
[LO]_Dimmwert EF 4: 0
[LO]_Dimming Direction EF 4: [VO]_maximize
[LO]_Lichtfunktion G 4: [VO]_nicht aktiv
[LO]_Lichtfunktion H 4: [VO]_nicht aktiv
[LO]_Dimmwert GH 4: 0
[LO]_Dimming Direction GH 4: [VO]_maximize
[VO]_Leuchte5 TFL RB32:
[LO]_Lasttyp 5: [VN]_0 - Keine Ansteuerung des Pins durch Konfigurator
[LO]_Lampendefektbitposition 5: 0
[LO]_Fehlerort mittleres Byte DTC-DFCC 5: 0
[LO]_Lichtfunktion A 5: [VO]_nicht aktiv
[LO]_Lichtfunktion B 5: [VO]_nicht aktiv
[LO]_Dimmwert AB 5: 0
[LO]_Lichtansteuerung HD AB 5: [VO]_always
[LO]_Lichtfunktion C 5: [VO]_nicht aktiv
[LO]_Lichtfunktion D 5: [VO]_nicht aktiv
[LO]_Dimmwert CD 5: 0
[LO]_Dimming Direction CD 5: [VO]_maximize
[LO]_Lichtfunktion E 5: [VO]_nicht aktiv
[LO]_Lichtfunktion F 5: [VO]_nicht aktiv
[LO]_Dimmwert EF 5: 0
[LO]_Dimming Direction EF 5: [VO]_maximize
[LO]_Lichtfunktion G 5: [VO]_nicht aktiv
[LO]_Lichtfunktion H 5: [VO]_nicht aktiv
[LO]_Dimmwert GH 5: 0
[LO]_Dimming Direction GH 5: [VO]_maximize
|
|
|
|
Post by tcokervw on Dec 11, 2021 20:35:01 GMT
Same boat. Not had any luck too. I've kept my eyes on a Russian forums for some hope. However, I've seen some coding there but have not tried it on my car yet.
My car is UK one and i have the MID LED headlight
Encoding: Block 09 → login-password 31347 → adaptation →
Leuchte2SL VLB10-Dimming Direction CD 2, maximize
Leuchte2SL VLB10-Dimming Direction EF 2, minimize
Leuchte2SL VLB10-Dimming Direction GH 2, maximize
VLuchte10-
ABBL2SL VLB10-Dimmwert CD 2.30
Leuchte2SL VLB10-Dimmwert EF 2.24
Leuchte2SL VLB10-Dimmwert GH 2.0
VLB10-Fehlerort Leuchte2SL mittleres Byte DTC-DFCC 2,4A
Leuchte2SL VLB10-Lampendefektbitposition 2.48
Leuchte2SL VLB10-Lasttyp 2.4 - LED Tagfahrlichtmodul Signal
Leuchte2SL VLB10 Lichtansteuerung HD-AB 2, Always
Leuchte2SL VLB10 Lichtfunktion A-2, Daytime running lights
Leuchte2SL VLB10-Lichtfunktion B 2, not active
Leuchte2SL VLB10-Lichtfunktion C 2, Standlicht allgemein (Schlusslicht: Positionslicht: Begrenzungslicht)
Leuchte2SL VLB10-Lichtfunktion D 2, Parklseicht
links aktiv (beide Phasen)
Leuchte2SL VLB10-Lichtfunktion F 2, not active
Leuchte2SL VLB10-Lichtfunktion G 2, not active
Leuchte2SL VLB10-Lichtfunktion H 2, not active
Leuchte3SL VRB21-Dimming Direction CD 3, maximize
Leuchte3SL VRB21 Dimming Direction EF-3, minimize
Leuchte3SL VRB21-Dimming Direction GH 3, maximize
Leuchte3SL VRB21 Dimmwert-AB 3.100
Leuchte3SL VRB21 Dimmwert-CD 3.30
Leuchte3SL VRB21 EF-Dimmwert 3.24
Leuchte3SL GH-Dimmwert VRB21 3.0
Leuchte3SL VRB21-Fehlerort mittleres Byte DTC-DFCC 3,4C
Leuchte3SL VRB21-Lampendefektbitposition 3,4C
Leuchte3SL VRB21-Lasttyp 3.4 - LED Tagfahrlichtmodul Signal
Leuchte3SL VRB21 Lichtansteuerung HD-AB 3, Always
Leuchte3SL VRB21-Lichtfunktion A 3, Daytime running lights
Leuchte3SL VRB21-Lichtfunktion B 3, not active
Leuchte3SL VRB21-Lichtfunktion C 3, Standlicht allgemein (Schlusslicht: Positionslicht: Begrenzungslicht)
Leuchte3SL VRB21-Lichtfunktion D 3, Parking light right
Leuchte3SL VRB21-Lichtfunk referee Ete 3,
BlinkSL VRB21-Lichtfunk
referee VRB21-Lichtfunktion G 3, not active
Leuchte3SL VRB21-Lichtfunktion H 3, not active
|
|
|
|
Post by jackytw on Dec 12, 2021 15:24:52 GMT
Today I tried to modify below setting as picture As I referred an old guide for Halogen headlight. But looks like 2020 Tiguan is Bi-Xenon headlight. vwcoding.ru/en/MQB/headLights/But below doesn't work   |
|
|
|
Post by tcokervw on Dec 12, 2021 19:11:40 GMT
Don't bother mate, there is hardly any workable Adaptation for Tiguan MK2/AD1 our there. As soon as i know of any workable update, I'll let you know
|
|
|
|
Post by tcokervw on Dec 15, 2021 22:38:07 GMT
I have good news form for you. However, it comes with an annoyance. Leuchte6ABL LC5: Lasttyp 6: 5 - LED Abblendlicht Lampendefektbitposition 6: 36 Fehlerort mittleres Byte DTC-DFCC 6: 1a Lichtfunktion A 6: Abblendlicht links Lichtfunktion B 6: Lichthupe generell Dimmwert AB 6: 127 Lichtansteuerung HD AB 6: always Lichtfunktion C 6: nicht aktiv Lichtfunktion D 6: nicht aktiv Dimmwert CD 6: 0 Dimming Direction CD 6: maximize Lichtfunktion E 6: nicht aktiv Lichtfunktion F 6: nicht aktiv Dimmwert EF 6: 0 Dimming Direction EF 6: maximize Lichtfunktion G 6: Blinken links activ (beide phasen)
Lichtfunktion H 6: Fernlicht rechts
Dimmwert GH 6: 0 Dimming Direction GH 6: minimum
Leuchte7ABL RB1: Lasttyp 7: 5 - LED Abblendlicht Lampendefektbitposition 7: 40 Fehlerort mittleres Byte DTC-DFCC 7: 1b Lichtfunktion A 7: Abblendlicht rechts Lichtfunktion B 7: Lichthupe generell Dimmwert AB 7: 127 Lichtansteuerung HD AB 7: always Lichtfunktion C 7: nicht aktiv Lichtfunktion D 7: nicht aktiv Dimmwert CD 7: 0 Dimming Direction CD 7: maximize Lichtfunktion E 7: nicht aktiv Lichtfunktion F 7: nicht aktiv Dimmwert EF 7: 0 Dimming Direction EF 7: maximize Lichtfunktion G 7: Blinken rechts activ (beide phasen)
Lichtfunktion H 7: Fernlicht Links
Dimmwert GH 7: 0 Dimming Direction GH 7: minimum
Leuchte2SL VLB10, Leuchte3SL VRB21, Leuchte4TFL LB4 and Leuchte5 TFL RB32 are not functioning on my Tiguan MID LED headlight. They have no bulbs allocated to them. I do not know if it is because it is a UK spec I am getting this annoying bulb issue tough after reseting and clearing errors. it comes back 3 seconds after using the indicator stalk to indicate  |
|
|
|
Post by tcokervw on Dec 15, 2021 23:55:19 GMT
Hello all Now my Tiguan DRL is always on while turn signal on. I would like to change DRL to flash when turn signal on. But can not find good example from search. Below is my export from ODIS(would be same as OBd11), not sure change which channel. any suggestions welcome, I will try it. thanks [VO]_Leuchte4TFL LB4: [LO]_Lasttyp 4: [VN]_0 - Keine Ansteuerung des Pins durch Konfigurator [LO]_Lampendefektbitposition 4: 0 [LO]_Fehlerort mittleres Byte DTC-DFCC 4: 0 [LO]_Lichtfunktion A 4: [VO]_nicht aktiv [LO]_Lichtfunktion B 4: [VO]_nicht aktiv [LO]_Dimmwert AB 4: 0 [LO]_Lichtansteuerung HD AB 4: [VO]_always [LO]_Lichtfunktion C 4: [VO]_nicht aktiv [LO]_Lichtfunktion D 4: [VO]_nicht aktiv [LO]_Dimmwert CD 4: 0 [LO]_Dimming Direction CD 4: [VO]_maximize [LO]_Lichtfunktion E 4: [VO]_nicht aktiv [LO]_Lichtfunktion F 4: [VO]_nicht aktiv [LO]_Dimmwert EF 4: 0 [LO]_Dimming Direction EF 4: [VO]_maximize [LO]_Lichtfunktion G 4: [VO]_nicht aktiv [LO]_Lichtfunktion H 4: [VO]_nicht aktiv [LO]_Dimmwert GH 4: 0 [LO]_Dimming Direction GH 4: [VO]_maximize [VO]_Leuchte5 TFL RB32: [LO]_Lasttyp 5: [VN]_0 - Keine Ansteuerung des Pins durch Konfigurator [LO]_Lampendefektbitposition 5: 0 [LO]_Fehlerort mittleres Byte DTC-DFCC 5: 0 [LO]_Lichtfunktion A 5: [VO]_nicht aktiv [LO]_Lichtfunktion B 5: [VO]_nicht aktiv [LO]_Dimmwert AB 5: 0 [LO]_Lichtansteuerung HD AB 5: [VO]_always [LO]_Lichtfunktion C 5: [VO]_nicht aktiv [LO]_Lichtfunktion D 5: [VO]_nicht aktiv [LO]_Dimmwert CD 5: 0 [LO]_Dimming Direction CD 5: [VO]_maximize [LO]_Lichtfunktion E 5: [VO]_nicht aktiv [LO]_Lichtfunktion F 5: [VO]_nicht aktiv [LO]_Dimmwert EF 5: 0 [LO]_Dimming Direction EF 5: [VO]_maximize [LO]_Lichtfunktion G 5: [VO]_nicht aktiv [LO]_Lichtfunktion H 5: [VO]_nicht aktiv [LO]_Dimmwert GH 5: 0 [LO]_Dimming Direction GH 5: [VO]_maximize this is mine Leuchte 0 BLK VL B36: Lasttyp 0: not active Lampendefektbit Position 0: 0 Fehlerort mittleres Byte DTC-DFCC 0: 0 Lichtfunktion A 0: nicht aktiv Lichtfunktion B 0: nicht aktiv Dimmwert AB 0: 0 Lichtansteuerung HD AB 0: always Lichtfunktion C 0: nicht aktiv Lichtfunktion D 0: nicht aktiv Dimmwert CD 0: 0 Dimming Direction CD 0: maximize Lichtfunktion E 0: nicht aktiv Lichtfunktion F 0: nicht aktiv Dimmwert EF 0: 0 Dimming Direction EF 0: maximize Lichtfunktion H 0: nicht aktiv Dimmwert GH 0: 0 Dimming Direction GH 0: maximize Lichtfunktion G 0: nicht aktiv Leuchte1BLK VRB20: Lasttyp 1: not active Lampendefektbitposition 1: 0 Fehlerort mittleres Byte DTC-DFCC 1: 0 Lichtfunktion A 1: nicht aktiv Lichtfunktion B 1: nicht aktiv Dimmwert AB 1: 0 Lichtansteuerung HD AB 1: always Lichtfunktion C 1: nicht aktiv Lichtfunktion D 1: nicht aktiv Dimmwert CD 1: 0 Dimming Direction CD 1: maximize Lichtfunktion E 1: nicht aktiv Lichtfunktion F 1: nicht aktiv Dimmwert EF 1: 0 Dimming Direction EF 1: maximize Lichtfunktion G 1: nicht aktiv Lichtfunktion H 1: nicht aktiv Dimmwert GH 1: 0 Dimming Direction GH 1: maximize Leuchte2SL VLB10: Lasttyp 2: not active Lampendefektbitposition 2: 0 Fehlerort mittleres Byte DTC-DFCC 2: 0 Lichtfunktion A 2: nicht aktiv Lichtfunktion B 2: nicht aktiv Dimmwert AB 2: 0 Lichtansteuerung HD AB 2: always Lichtfunktion C 2: nicht aktiv Lichtfunktion D 2: nicht aktiv Dimmwert CD 2: 0 Dimming Direction CD 2: maximize Lichtfunktion E 2: nicht aktiv) Lichtfunktion F 2: nicht aktiv Dimmwert EF 2: 0 Dimming Direction EF 2: minimize Lichtfunktion G 2: nicht aktiv Lichtfunktion H 2: nicht aktiv Dimmwert GH 2: 0 Dimming Direction GH 2: minimize Leuchte3SL VRB21: Lasttyp 3: not active Lampendefektbitposition 3: 0 Fehlerort mittleres Byte DTC-DFCC 3: 0 Lichtfunktion A 3: nicht aktiv Lichtfunktion B 3: nicht aktiv Dimmwert AB 3: 0 Lichtansteuerung HD AB 3: always Lichtfunktion C 3: nicht aktiv Lichtfunktion D 3: nicht aktiv Dimmwert CD 3: 0 Dimming Direction CD 3: maximize Lichtfunktion E 3: Blinken rechts aktiv (beide Phasen) Lichtfunktion F 3: nicht aktiv Dimmwert EF 3: 0 Dimming Direction EF 3: minimize Lichtfunktion G 3: nicht aktiv Lichtfunktion H 3: nicht aktiv Dimmwert GH 3: 0 Dimming Direction GH 3: minimize Leuchte4TFL LB4: Lasttyp 4: not active Lampendefektbitposition 4: 0 Fehlerort mittleres Byte DTC-DFCC 4: 0 Lichtfunktion A 4: nicht aktiv Lichtfunktion B 4: nicht aktiv Dimmwert AB 4: 0 Lichtansteuerung HD AB 4: always Lichtfunktion C 4: nicht aktiv Lichtfunktion D 4: nicht aktiv Dimmwert CD 4: 0 Dimming Direction CD 4: maximize Lichtfunktion E 4: nicht aktiv Lichtfunktion F 4: nicht aktiv Dimmwert EF 4: 0 Dimming Direction EF 4: minimize Lichtfunktion G 4: nicht aktiv Lichtfunktion H 4: nicht aktiv Dimmwert GH 4: 0 Dimming Direction GH 4: maximize Leuchte5 TFL RB32: Lasttyp 5: not active Lampendefektbitposition 5: 0 Fehlerort mittleres Byte DTC-DFCC 5: 0 Lichtfunktion A 5: nicht aktiv Lichtfunktion B 5: nicht aktiv Dimmwert AB 5: 0 Lichtansteuerung HD AB 5: always Lichtfunktion C 5: nicht aktiv Lichtfunktion D 5: nicht aktiv Dimmwert CD 5: 0 Dimming Direction CD 5: maximize Lichtfunktion E 5: nicht aktiv Lichtfunktion F 5: nicht aktiv Dimmwert EF 5: 0 Dimming Direction EF 5: minimize Lichtfunktion G 5: nicht aktiv Lichtfunktion H 5: nicht aktiv Dimmwert GH 5: 0 Dimming Direction GH 5: maximize |
|
|
|
Post by jackytw on Dec 18, 2021 16:27:58 GMT
tcokervw I got someone reply me in facebook, he told me since the light control's lasttyp is "no active" default, so there should not to be controlled by BCM. Even I changed the lasttyp to what I want it. But it still can't work. One alternative way is to flash Fog light with turn signal. Change: LB45 Lichtfunktion G12 = Blinken Links Dunkelphase Dimmwert GH 12 = 127 RB5 Lichtfunktion G13 = Blinken Rechts Dunkelphase Dimmwert GH 13 = 127 But I have not tried this, I will find time to try it.
|
|
|
|
Post by jackytw on Dec 19, 2021 14:08:02 GMT
I tried today, I modified below(The Fog will flash with turn signal in the same time, if use DunkelPhase, it will have delay flash)
LB45
Lichtfunktion G12 = Blinken Links Hellphase
Dimmwert GH 12 = 127
RB5
Lichtfunktion G13 = Blinken Rechts Hellphase
Dimmwert GH 13 = 127
|
|
|
|
Post by tcokervw on Dec 21, 2021 20:56:16 GMT
I live in the UK and dont think that is legal. That said, i find that option tacky. After so much reading i agree with the reply you got from facebook as i have had that too  |
|
|
|
Post by tcokervw on Dec 21, 2021 21:02:04 GMT
|
|
|
|
Post by denis1 on Dec 25, 2021 21:15:32 GMT
tcokervw I got someone reply me in facebook, he told me since the light control's lasttyp is "no active" default, so there should not to be controlled by BCM. Even I changed the lasttyp to what I want it. But it still can't work. One alternative way is to flash Fog light with turn signal. Change: LB45 Lichtfunktion G12 = Blinken Links Dunkelphase Dimmwert GH 12 = 127 RB5 Lichtfunktion G13 = Blinken Rechts Dunkelphase Dimmwert GH 13 = 127 But I have not tried this, I will find time to try it. Hello, I’ve been trying for a while to code this: I know this is stupid and ilegal , i’m not planning to use it on roads, just for fun with friends. Maybe you or someone else could help me. Thanks in advance |
|
|
|
Post by robo78 on Jan 5, 2022 23:27:08 GMT
Hi there. As I´m also interested in this mod I´m going to add my thoughts on that matter. Thanks to tcokervw for posting a link where you can find lot of info about flashlight coding. On that page you can see that for MID LED ligts which most of you have fitted, the DRL lights are set in Leuchte8FL LB39 / Leuchte9FL RB2, you can confirm it by looking at the wiring diagram for the headlights, where you can see that the J667/J668 OUTPUT MODULE FOR HEADLIGHT controls/powers the DRL/SIDE lights and TURN SIGNALS and is indeed connected to the BCM/J519/PIN2 for left DRL/SIDE light or J519/PIN39 for the right DRL/SIDE light, it can be seen at the adaptation log also.DRL lights or SIDE lights are formed by 6LEDs (2 forms the U signature around the dipped/main beam unit and 4 forms the L signature from the upper edge of the headlight). Only difference is that when they works as DRL the power rating is 4W (U shape)+8W (L shape) and when they works as side lights the power is 0,4W (U)+0,8W(L). All of that can be found on internet at self study programme 553 and wiring diagrams. So in my opinion if someone wants to change the DRL behavior it must be done in the mentioned leuchte sets Leuchte8FL LB39 / Leuchte9FL RB2 at least for MID headlights. What I would try if I were brave enough  is to change/add: FOR RIGHT DRL Leuchte8FL LB39: Lichtfunktion E 8: Blinken rechts Hellphase Lichtfunktion F 8: nicht aktiv Dimmwert EF 8: 0 Dimming Direction EF 8: minimize FOR LEFT DRL Leuchte9FL RB2: Lichtfunktion E 9: Blinken links Hellphase Lichtfunktion F 9: nicht aktiv Dimmwert EF 9: 0 Dimming Direction EF 9: minimizeNOTES: 1. The A27/A31 units controls the DIPPED/MAIN BEAM LED unit+ADDITIONAL MAIN BEAM+STATIC CORNER LIGHT LED module for the RIGT/LEFT headlight respectively. 2. SIDE light=PARKING light 3. I could be completely wrong about everything , but it must be possible if they were able to code things shown on the video posted by denis1 4. Link to Self-study programme The Tiguan 2017 Electrical System and Infotainment if someone is interested drive.google.com/file/d/1OLeXzJGR6UEFv1j6Jc3iEu79vakKYbLp/viewhistory.txt (205.66 KB)   |
|
|
|
Post by dv52 (Australia) on Jan 6, 2022 2:01:01 GMT
hmm............ lot's of interesting information in the posts above - but I want to add perhaps a different perspective to those who have failed in their attempts to change stuff. First, I want to say that it's fantastic that folk want to learn about Leuchte-programming. It's a programming language that is relatively simple - but it's nevertheless a powerful instruction set and there is no "official" Leuchte-manual in the public domain (that I can find- but happy to be advised otherwise). So forum-threads like this are a great community resource! Second, Leuchte-programming was introduced into MQB platform cars way back in 2013 with the first version of the Golf mk7. Since then, other VW/Audi models have been translated to MQB (like the 2nd gen Tiggy) and there have been a number of new CAN based innovations on MQB platform cars that have impacted the way the 35 x exterior lights are managed.
Important amongst these CAN based innovations was the introduction of LCMs (short for Light Control Modules). These modules appear in OBD11 scan reports with names like Light Control Right, or Light Control Left . In cars that have LCMs fitted, the central electrics module @ address hex09 does NOT control the lamps in headlight fittings - which means that the allied Leuchte-sets in the module are factory disabled. Alas, OBD11 cannot be used to access the coding values in LCMs
So - if the car has LCMs, it's not possible to change the behavior of lamps in headlight fittings (like DRL LEDS) via Leuchte-programming because there are no wire connections made to the sockets on central electrics module. Instead, these wires are terminated on the LCMs
Don
|
|
|
|
Post by denis1 on Jan 14, 2022 17:16:02 GMT
Hi there. As I´m also interested in this mod I´m going to add my thoughts on that matter. Thanks to tcokervw for posting a link where you can find lot of info about flashlight coding. On that page you can see that for MID LED ligts which most of you have fitted, the DRL lights are set in Leuchte8FL LB39 / Leuchte9FL RB2, you can confirm it by looking at the wiring diagram for the headlights, where you can see that the J667/J668 OUTPUT MODULE FOR HEADLIGHT controls/powers the DRL/SIDE lights and TURN SIGNALS and is indeed connected to the BCM/J519/PIN2 for left DRL/SIDE light or J519/PIN39 for the right DRL/SIDE light, it can be seen at the adaptation log also.DRL lights or SIDE lights are formed by 6LEDs (2 forms the U signature around the dipped/main beam unit and 4 forms the L signature from the upper edge of the headlight). Only difference is that when they works as DRL the power rating is 4W (U shape)+8W (L shape) and when they works as side lights the power is 0,4W (U)+0,8W(L). All of that can be found on internet at self study programme 553 and wiring diagrams. So in my opinion if someone wants to change the DRL behavior it must be done in the mentioned leuchte sets Leuchte8FL LB39 / Leuchte9FL RB2 at least for MID headlights. What I would try if I were brave enough is to change/add: FOR RIGHT DRL Leuchte8FL LB39: Lichtfunktion E 8: Blinken rechts Hellphase Lichtfunktion F 8: nicht aktiv Dimmwert EF 8: 0 Dimming Direction EF 8: minimize FOR LEFT DRL Leuchte9FL RB2: Lichtfunktion E 9: Blinken links Hellphase Lichtfunktion F 9: nicht aktiv Dimmwert EF 9: 0 Dimming Direction EF 9: minimizeNOTES: 1. The A27/A31 units controls the DIPPED/MAIN BEAM LED unit+ADDITIONAL MAIN BEAM+STATIC CORNER LIGHT LED module for the RIGT/LEFT headlight respectively. 2. SIDE light=PARKING light 3. I could be completely wrong about everything , but it must be possible if they were able to code things shown on the video posted by denis1 4. Link to Self-study programme The Tiguan 2017 Electrical System and Infotainment if someone is interested drive.google.com/file/d/1OLeXzJGR6UEFv1j6Jc3iEu79vakKYbLp/viewView AttachmentView AttachmentView AttachmentView AttachmentThis does work , but partially After i coded your settings , first 1-2 blinks it worked , then it started to work with bugs and errors + i got on dashboard check left (light) turn signal |
|
|
|
Post by denis1 on Jan 15, 2022 0:56:35 GMT
So , I know that
Leuchte8/9 are for drl
Leuchte6/7 are for dipped beam , codings work well without errors , i tried today
So, which leuchte is for high beam ? I can’t seem to find it for MID LED
|
|
|
|
Post by denis1 on Jan 15, 2022 1:15:32 GMT
I also think i got the error because you missunderstood the names Leuchte8FL is for LEFT and Leuchte9FL is for RIGHT not the other way around , like you said  I think if i code Leuchte8FL blinken links ( not rechts ) hellphase , it should work without errors I will give it a try tomorrow and comeback with info I swear one day i will blow my car up lmao 😂😂 |
|
|
|
Post by robo78 on Jan 15, 2022 8:51:50 GMT
So back to the original post to make DRL blink with turn signal, make this:
Leuchte8FL LB39:
Lichtfunktion E 8:
Blinken rechts Dunkelphase
Lichtfunktion F 8:
nicht aktiv
Dimmwert EF 8:
0
Dimming Direction EF 8:
minimize
FOR LEFT DRL
Leuchte9FL RB2:
Lichtfunktion E 9:
Blinken links Dunkelphase
Lichtfunktion F 9:
nicht aktiv
Dimmwert EF 9:
0
Dimming Direction EF 9:
minimize
With this I've got my DRL wink with turn signal without any errors. Only backdraw is that that when hazard lights are active the DRLs will blink too, which may be confusing.
|
|
|
|
Post by robo78 on Jan 15, 2022 10:37:22 GMT
Hi denis1. No I was right. Leuchte8FL is the right side light and Leuchte9FL is the left side light. Now I must find out how to code the DRL to dim when turn signal active, which was my original goal. I have tried with Blinken rechts aktiv (beide Phasen) instead of blinken rechts dunkelphase but it didn't work. Maybe it must be used in the upper function pair (CD). I will try it later.
|
|
|
|
Post by denis1 on Jan 15, 2022 14:18:47 GMT
Hi denis1. No I was right. Leuchte8FL is the right side light and Leuchte9FL is the left side light. Now I must find out how to code the DRL to dim when turn signal active, which was my original goal. I have tried with Blinken rechts aktiv (beide Phasen) instead of blinken rechts dunkelphase but it didn't work. Maybe it must be used in the upper function pair (CD). I will try it later. Hello , you sure you are right ? There is this russian site which tells every leuchte channel , and for every modifications i tried it worked perfectly . And for 8/9 , it says it’s left/right . I will try in 2-3 hours and tell you anyway |
|
|
|
Post by robo78 on Jan 15, 2022 18:35:17 GMT
You can check it yourself, look at your admap for those lights, where it says parking light rechts, links. Or look at the above wiring diagrams for the lights and compare the connector pinouts which corresponds with the Leuchte numbering.
|
|
|
|
Post by jackytw on Jan 16, 2022 15:37:37 GMT
Hello Denis & Robo
Thanks for your comments, I am not sure if I got wrong information or not. I got the light definition as below.
The Leuchte8FL LB39 is High beam Front Left
The Leuchte9FL RB2 is High beam Front Right
Maybe it is different definition for different car model.
BTW, It is good news you get it works, I will find time to try it. Thanks
|
|
|
|
Post by denis1 on Jan 16, 2022 20:50:01 GMT
Hello , this is correct for basic led lights , for top led lights ( also called MID ) , 8/9 are for drls
|
|
|
|
Post by denis1 on Jan 16, 2022 21:20:19 GMT
So back to the original post to make DRL blink with turn signal, make this: Leuchte8FL LB39: Lichtfunktion E 8: Blinken rechts Dunkelphase Lichtfunktion F 8: nicht aktiv Dimmwert EF 8: 0 Dimming Direction EF 8: minimize FOR LEFT DRL Leuchte9FL RB2: Lichtfunktion E 9: Blinken links Dunkelphase Lichtfunktion F 9: nicht aktiv Dimmwert EF 9: 0 Dimming Direction EF 9: minimize With this I've got my DRL wink with turn signal without any errors. Only backdraw is that that when hazard lights are active the DRLs will blink too, which may be confusing. today it worked for me too , maybe the first time i did something wrong , i’ll delete past quotes Just one question , why does it say on the russian forum that 9 is for right , when it actually is for left? |
|
|
|
Post by denis1 on Jan 16, 2022 21:25:58 GMT
I found the problem , first time i put it with : Blinken links Hellphase
Thats how i got the error
Also you were right , 9 is for left and 8 for right , i checked that too now
Also , do you know the channel for high beam ? can’t seem to find it
|
|
|
|
Post by robo78 on Jan 16, 2022 22:27:40 GMT
Hello denis1. I'm glad that you have got it working. To answer your 1st question why it's listed in reverse, I think it is just a typo error. 2nd question leuchte set for high beam is Leuchte6ABL/7ABL. Dipped and main beam leds are in one module, dipped 7Leds, main 4Leds, when main beam is activated all 11LEDs are active.
|
|
|
|
Post by denis1 on Jan 16, 2022 22:31:57 GMT
Thanks for answering my questions ,but
if Leuchete 6/7 ABL are for both , which lichtfunktion is for high beam ? I tried to make low beam blink by changing same names as i did to leuchte9 , and it worked , but it worked only for low beam .
I can post a vid if interested
|
|
|
|
Post by tcokervw on Aug 2, 2022 10:34:48 GMT
I am interested to see how your DRL WINK looks like. This is mine but i have reverted back to default coding.
Here is the link.
Secondly, Is it possible to use the DRL long light(the one that looks like an eyebrow) as a DRL pulse and has it been tried by anyone?
|
|
|
|
Post by robo78 on Aug 10, 2022 13:26:33 GMT
Hi. No I´ve got mine turn signals blink with DRL lights(U shape+L shape). You have got blinking turn signals+dipped beam. See attachment. It was shoot at evening so it looks a bit bright but its ok. DRL_turnsignals_wink.avi (825.35 KB) |
|
|
|
Post by tcokervw on Aug 23, 2022 20:02:35 GMT
What is the coding please and do you have the coding for DRL lights(U shape+L shape) to dimm or off during signal blink
|
|
|
|
Post by robo78 on Aug 27, 2022 18:37:56 GMT
Hi. As for the coding look a few posts above. You can also dim the DRL to 25 but you cant turn them off while the turn signal is active.
|
|
is to change/add:
