|
|
1.7.1
Nov 29, 2021 6:35:09 GMT
Post by mtech on Nov 29, 2021 6:35:09 GMT
Use the following format to report bugs
Description of bug: your bug description
iOS software version: your IOS version
Phone: your apple phone model
Car: your vehicle brand, model and year
User email: your user email of the OBDeleven application.
Changelog
v1.7.1
- Fixed an issue when Adaptations were not visible in the control unit after a full scan in offline mode
- Fixed an issue of the application crash when the One-Click Apps for SFD protected vehicles were activated
- Fixed an issue where the text of Terms & Conditions and Privacy Policy was not highlighted and could not be clickable for some languages in the SFD personal info collection view
|
|
|
|
1.7.1
Nov 29, 2021 6:50:40 GMT
Post by menesars on Nov 29, 2021 6:50:40 GMT
Hi
I am encountering an error when ı try to unlock SFD Protection of some control units (For example: Dashboard Control Unit.) . The error is 'SFD with problem' warning. First I press Unlock Button and Im waiting its loading later I am get a warning ' SFD with Problem' but I am not encountering an error when ı try to unlock SFD Protection of Gateway Control Unit. I have done all neccesary like two factor authentication or Personal Information for unlock 'SFD Protection'
iOS Software version: 15.1
Phone: iPhone 7 Plus
Car: VW Caddy 2021
User email: menesarss@outlook.com
|
|
|
|
1.7.1
Nov 29, 2021 13:34:55 GMT
Post by a4engrsd on Nov 29, 2021 13:34:55 GMT
Description of bug: All 01-Engine Basic Settings adaptations/tests Fail to RunOBDeleven version: v1.7.0 iOS software version: 14.8 Phone: iPhone 6S Car: Audi, A4, 2002, 1.8T Quattro, B6, AMB eng, 6sp-auto-gearbox, non UDS User email: bradl.sd.com@cox.net Details: I have tried to run Throttle Body Adaptation 01-Engine Basic Settings Ch 060 many times with this and previous OBDeleven versions. Conditions: Ignition On, Engine Off, Vbattery > 11.5V, No Engine faults/DTCs. I swipe the "Slide to Start" to the right. It briefly turns Red indicating "Slide to Stop", then in 1.0sec or less it slides back to the left Stop position on its own, and then displays Error message "Failed". Every single time. It doesn't help to hold the slider with finger in the start position. The test sounds like it begins to start, as I hear a couple of clicks in throttle body, but it stops as soon as the slider returns to left position. Every basic step I have tried has the exact same behavior. I have made a complete video recording of my iPhone screen attempting to run through all of the Basic Settings Readiness tests described on p72 in this document: www1.snapon.com/Files/Diagnostics/UserManuals/VolkswagenAudiReadinessCodeCharts.pdf. Tests that have a status in 4th channel, never change from "Test OFF". Two of these tests, I could hear the engine starting to rev on its own but stopped as soon as the slider bounced back to the start position. Basic Tests which failed w/ the same behavior: 060,063,001,107,070,028,034,036,037,041,043,046,094,071,077,014. Look at your own Forum thread forum.obdeleven.com/post/47497/thread. Do you see anyone that has posted since 2018 that the Throttle Body Adaptation works? No. THIS IS UNACCEPTABLE. Fix it ASAP please! Do you do any true testing of your App on Audi vehicles? If so which models? I do not have an Android phone and do not plan to buy one unless you can prove to me that these tests work on the Android app. Find me one single user that can attest that running the latest version of your App on Android phone executes any of the tests successfully. |
|
|
|
1.7.1
Dec 2, 2021 21:05:18 GMT
Post by a321tdi on Dec 2, 2021 21:05:18 GMT
Same as previous post
Description of bug: All 01-Engine Basic Settings adaptations/tests Fail to Run
OBDeleven version: v1.7.0
iOS software version: 15.1.1
Phone: iPhone 13Pro
Car: VW, Golf Variant, 2012, 2.0 TDI CJAA, A6, 6sp Manual
User email: wilson.aaron.g@gmail.com
Same as previous post. I am trying to use this device for the basic task of purging my fuel system after i changed the fuel filter using Channel 35 on iOS and it is failed. I feel like i wasted my time or that i am going to have to get an entire phone dedicated only to OBDeleven since they clearly dont actually work with iOS like they say.
I am getting a message: ERROR Failed when i try to run the fuel pumps. Now i am stuck with my car sitting half way out of my garage, unable to start it because of the possibility of air in my fuel lines. Could you all please make sure the device actually fully works with iOS before you advertise it as such? Please provide some sort of feedback because this is awful.
|
|
octacon
Closed beta tester
Posts: 9
|
1.7.1
Dec 8, 2021 16:51:23 GMT
via mobile
Post by octacon on Dec 8, 2021 16:51:23 GMT
Hello, I find a bug that I think is also in Android and that is that when I enter live data of module 76 for example, in the section of wheel circumferences, in the results that come out in hex, of the 4 figures the third is always a 0 when in odis instead another different numbering comes out. for example in odis 07A3 in obd11 0703 and so on. Thanks
iOS software version: IOS 15.1
Phone: Iphone X
Car: Seat Leon MK3 MY20 (but it happens with all brands)
User email: serra.kmrs@gmail.com
|
|
|
|
1.7.1
Dec 12, 2021 21:01:14 GMT
Post by plateump on Dec 12, 2021 21:01:14 GMT
Description of bug: App "Gauge Test - Needle Sweep" doesn't work
iOS software version: 15.2
Phone: iPhone 8
Car: Skoda Octavia iV
User email: on request
|
|
|
|
1.7.1
Dec 21, 2021 13:34:59 GMT
Post by ghostrider72 on Dec 21, 2021 13:34:59 GMT
Hi
My OBDeleven was working fine few weeks ago. Now It detect car VIN, gives me modules list but I cannot access any modules. Says "Control unit not responding. Check Ignition and try again". Obviously ignition is on.
Tried on Golf MK7 and Golf MK8 with the same result. I have deleted old app and downloaded new one, no difference. I can see my car VIN, just can't connect to any modules.
Any idea what it might be?
Regards
|
|
reso
New Member
Posts: 5
|
1.7.1
Dec 22, 2021 4:10:44 GMT
via mobile
Post by reso on Dec 22, 2021 4:10:44 GMT
Description of bug: unable to connect to Engine 01. Can’t read info, live data, adaptations, long coding - nothing works
iOS software version: latest
Phone: iphone 12 pro
Car: cupra formentor 1.5
User email: upon request
|
|
Deleted
Deleted Member
Posts: 0
|
1.7.1
Jan 20, 2022 19:13:58 GMT
Post by Deleted on Jan 20, 2022 19:13:58 GMT
Description of bug: THIS IS FOR VERSION 1.8.0
- Application fails to connect.
- Installed update. Turned ignition on, started application and signed into it. Pressed the Connect icon and all the icon did was 'spin' for a few minutes.
- Could not close application.
- Did a 'hard' reboot of iPhone, and verified that the OBDII device was connected to the phone via Bluetooth.
- Restarted the application and it took me back to the Connect icon (not to the login screen). Hit the icon and it repeated the 'spinning' with no further activity.
26-JAN-2022
Follow-up:
Dropped the app and re-installed the newer release of version 1.8.0 (18103).
App now connects to the ODBII and performs scans.
iOS software version: 15.2.1
Phone: SE (2020)
Car: VW GTI, 2017
User email: jeffrey.r.tate@gmail.com
|
|
|
|
1.7.1
Jan 26, 2022 11:15:51 GMT
Post by phgert on Jan 26, 2022 11:15:51 GMT
Hi,
Description of bug: After connecting with the bluetooth OBDEleven, and imput the VIN number, from below selection for cars pops up. Unable to scroll it downwards.
iOS software version: 15.2.1
Phone: Iphone Xs
Car: Volkswagen Golf Variant 2017 (before week 22)
User email: (due privacy not visible)
|
|
