|
Post by mencey on Oct 30, 2021 10:39:11 GMT
STG A5 Werkseinstellung 00 08 30 2A 15 01 08 E0 06 24 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 STG A5 TA ohne VZE 00 08 30 2A 15 01 10 E4 16 A4 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 STG A5 TA mit VZE 00 08 30 2A 15 01 10 E4 16 24 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
|
|
Post by littlebugger25 on Nov 23, 2021 14:17:33 GMT
I finaly found out what VZE stands for. Perhaps noobish but VZE = Traffic sign recognition.
|
|
|
Post by cioce on Nov 23, 2021 14:39:54 GMT
Traffic sign recognition is not only coding on new cam.
|
|
|
Post by terpower on Nov 28, 2021 12:49:19 GMT
I activate travel assist to my Pro Business model. But I find out that my steering wheel may not be capasitive or I can not find the place where I can activate that.
Travel assist works fine, but in every 15 seconds I must turn the wheel. Touching it does not help.
Is there any solution about that ?
|
|
|
Post by cioce on Nov 28, 2021 15:14:02 GMT
You need to change the steering wheel.
|
|
|
Post by terpower on Nov 28, 2021 17:14:34 GMT
Or the whole car 😀
|
|
|
Post by mencey on Nov 30, 2021 17:42:41 GMT
Follow the ID.3 thread there we are talking about it and this coding works for both. The discussion was started in the ID.3 thread and it's a pain to post in both places.
|
|
|
Post by davidodbro on Jan 28, 2022 20:59:54 GMT
Hello, my friend was here last night and I tried to activate travelassist on his brand new id4. The code in first post did not work, here is his original code: 00 08 30 6A 15 81 08 E0 06 24 20
When I applied the code in first post the car gave some error on frontassist mm. So I compared the code on my id3 and successful changed to: 00 08 30 6A 15 81 10 E4 16 24 20
What not did go as planned was activate high beam assist. On my id3 I changed bit 5 from 01 to 05 but he's id4 has 81. I will test some more when he is at my place next time, I'm planning to test change 81 to 85.
Or have someone else some suggestions?
|
|
|
Post by viper1705 on Feb 11, 2022 11:52:01 GMT
In my id.4 I see the following code:
00 08 30 6A 15 81 08 F0 06 24 20
So I don't have E0, should I then change it to F4 ?
|
|
sijk
New Member
Posts: 3
|
Post by sijk on Mar 3, 2022 20:15:48 GMT
So I don't have E0, should I then change it to F4 ? According to Travel assist KLR einstellung ID4.pdf found from forum.obdeleven.com/post/60577/threadCoding for STG A5 byte 7 E0 (original) has - 00 emergency assist variante, not coded
- 20 configuration for lane departure warning, activated
F0 (your code) has - 00 emergency assist variante, not coded
- 30 configuration for lane departure warning, last setting
F4 (would keep the lane departure warning unchanged) has - 04 emegency assist variante, Ea_variante_2
- 30 configuration for lane departure warning, last setting
So, you have apparently changed setting for "lane departure warning" already and it should be okay to keep it. Easiest is just change the relevant values and keep the long code otherwise unchanged. - HC_point_of_intervention: late → early_setting_over_menu
- Emergency_assist_variante: Not_coded → Ea_variante_2
- HC_variante: Hc_variante_0 → Hc_variante_2.
|
|
hetch
New Member
Posts: 2
|
Post by hetch on May 27, 2022 20:49:33 GMT
00 06 30 2A 15 05 08 D0 06 24 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
The above is the factory setting on my brand new ID4 Crozz Pure Plus made in China.
I needed to check if the below change is correct before messing up with the car?
00 06 30 2A 15 05 10 D4 16 24 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Edit: I did the above changes and the TravelAssist button lit and it does work but keep bouncing between the 2 lines, it does not center itself. Any thought? Edit2: I was wrongly using the lane assist instead of the activated Travel Assist! Works perfectly well now.
|
|
|
Post by dallah on Jun 22, 2022 13:18:50 GMT
Hello Hetch,
hope you are doing well, have you activated the travel assist on ID4 Crozz Pure Plus successfully? if yes then have you faced the 15 seconds warning issue? do your car has a capacitive steering?
please note that I have ID4 X Pure Plus and I like to try to activate the travel assist so can you please help me on this as I am very new to obdeleven I got my device jut this week.
|
|
|
Post by mahmoudshaban on Jul 20, 2022 10:42:16 GMT
I have ID4 x pure plus is it possible to activate it?
|
|
|
Post by marcozborn on Jul 24, 2022 9:29:31 GMT
My Cupra Born, build June 2022, has : 03 08 30 2a 15 45 08 e0 07 28 20
|
|
|
Post by marcozborn on Jul 24, 2022 9:37:10 GMT
I tried with Byte 6-7-8: "08 E4 16" and "08 E4 17" but didn't activate travel assist. I try "08 F4 16" and "08 F4 17" but the same: no travel assist. Any idea? Thx
|
|
Berny
New Member
Posts: 21
|
Post by Berny on Jul 24, 2022 15:32:52 GMT
I tried with Byte 6-7-8: "08 E4 16" and "08 E4 17" but didn't activate travel assist. I try "08 F4 16" and "08 F4 17" but the same: no travel assist. Any idea? Thx Please have a look into the discussion in the CUPRA Born part of the forum. I posted a possibility for a Born with a Pilot Pack (M or L) and Protect Pact (Pre Crash Assist). My car has the "old" software. It would be nice if your car has the "new" software (3.0) and it would work with the new software.
|
|
Berny
New Member
Posts: 21
|
Post by Berny on Jul 24, 2022 17:59:20 GMT
So I don't have E0, should I then change it to F4 ? According to Travel assist KLR einstellung ID4.pdf found from forum.obdeleven.com/post/60577/threadCoding for STG A5 byte 7 E0 (original) has - 00 emergency assist variante, not coded
- 20 configuration for lane departure warning, activated
F0 (your code) has - 00 emergency assist variante, not coded
- 30 configuration for lane departure warning, last setting
F4 (would keep the lane departure warning unchanged) has - 04 emegency assist variante, Ea_variante_2
- 30 configuration for lane departure warning, last setting
So, you have apparently changed setting for "lane departure warning" already and it should be okay to keep it. Easiest is just change the relevant values and keep the long code otherwise unchanged. - HC_point_of_intervention: late → early_setting_over_menu
- Emergency_assist_variante: Not_coded → Ea_variante_2
- HC_variante: Hc_variante_0 → Hc_variante_2.
Your proposal for the settings in the last chapter will do it for ID.3/ID.4 and of course CUPRA Born. Maybe, it will work on other MEB cars too.
|
|
|
Post by francyray on Aug 17, 2022 17:19:04 GMT
Ho, i've ID4 Pro, how can activate Travel assist? Which menu of OBDeleven[ (i'm pro version) quote author=" davidodbro" source="/post/63671/thread" timestamp="1643403594"]Hello, my friend was here last night and I tried to activate travelassist on his brand new id4. The code in first post did not work, here is his original code: 00 08 30 6A 15 81 08 E0 06 24 20 When I applied the code in first post the car gave some error on frontassist mm. So I compared the code on my id3 and successful changed to: 00 08 30 6A 15 81 10 E4 16 24 20 What not did go as planned was activate high beam assist. On my id3 I changed bit 5 from 01 to 05 but he's id4 has 81. I will test some more when he is at my place next time, I'm planning to test change 81 to 85. Or have someone else some suggestions?[/quote]
|
|
|
Post by jerry00 on Sept 17, 2022 10:09:10 GMT
Hi, I successfully managed to activate (limited - without capacitive) travel assist. All I did was change: - HC_point_of_intervention: Late --> early_setting_over_menu - Emergency_assist_variante: Not_coded --> Ea_variante_2 - HC_variante: Hc_variante_0 -->. Hc_variante_2.
I had some issues with fully backing up control modules. Somehow even after succesful finish of backing up it backed up only two control modules and even those without long coding. So I tried manually with every control module in the car and it didn't allow me to long code back up some modules. Could anyone help me with that? And also, I don't have Matrix lights but i see option for automatic adjustment of long lights. Could that somehow interfere with travel assist settings?
(I backed up driver assistance module just in case and some other that I was able to)
|
|
obaid
New Member
Posts: 2
|
Post by obaid on Nov 11, 2022 18:55:25 GMT
Hello i have 2022 june id.4 pure plus Where to active travel, assistant
|
|
|
Post by phil26 on Nov 30, 2022 14:29:20 GMT
I have a problem with OBDeleven and my ID4 Pro Performance (German model 2023)
My codes at A5 are following:
00 08 30 6A 15 C5 08 E0 07 20 20 00 ..........
Every try to change this I get a reported error that there is a failure writing at long coding.
What did I wrong and what is the correct HEX for my ID 4 Pro Performance.
|
|
gdn21
New Member
Posts: 21
|
Post by gdn21 on Dec 14, 2022 16:31:02 GMT
Mine is fully OK now instead of the fact that i can’t activate my capacitive steering wheel… Someone succeed to activate the changing lane assist as i have the side cameras and sensors ?
|
|
|
Post by marclee78 on Dec 30, 2022 14:57:07 GMT
Hi I’ve just got OBD and looking to add travel assist, my A5 line looks different to what I have seen on forums - UK ID4 first addition June 21:
A5 : 00 09 30 68 15 05 08 E0 06 24 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Any help please?
|
|
|
Post by mor10w on Jan 23, 2023 20:34:43 GMT
I’m completely new to this way og modifying cars, but I do know my way around coding, so maybe this is just a noob issue:
I’ve tried all of the above suggestions, but I can’t get it to write the long coding changes. I do have a PRO subscription, but my ID.4 2023 pro performance refuses to write them. Is there anything obvious that I might be missing, i.e. The bonnet needs to be open or there is a prerequisite code you need to open something or how do you manage to get the cars to accept the changes?
Any help is greatly appreaciated!
|
|
|
Post by zejeff on Jun 28, 2023 9:23:03 GMT
Hi All
I receive my New ID.4 in some days and I'm a bit lost about the code to use to activate Travel Assist. It's a 77KWh Pro ... does someone clear out which codes are suppose to work?
Thanks and sorry for the probably dumb question
|
|
|
Post by generationgav on Jun 28, 2023 14:29:27 GMT
Go to A5 and then go to Adaptations
Change the following;
HC_point_of_intervention: late → early_setting_over_menu HC_variante: Hc_variante_0 → Hc_variante_2
Optional
Emergency_assist_variante: Not_coded → Ea_variante_2 I left mine to Not_coded as without the touch steering wheel it can slam on your brakes if it "thinks" you're not there.
|
|
|
Post by johnnykl on Jul 2, 2023 11:17:25 GMT
I finaly found out what VZE stands for. Perhaps noobish but VZE = Traffic sign recognition. VZE stands for VerkehrsZeichenErkennung in German. Meaning traffic sign recognition 😉
|
|
|
Post by icebird757 on Jul 9, 2023 13:06:16 GMT
Hello all and sorry to ask again but I have been reading in all of the forums I can find about how to activate travel assist. I read that the coding is the same as for ID3/4/5. I understand this question has been answered many time but I'm a newbie in this whole coding game. So My 22' ID4 GTX has some other A5 codes and I haven´t been able to find those in any forums and to be honest I did read the PDF in one of them but My code didn´t make sense at all, comparing my code to the pdf file. I have 360 cameras, blind spot, traffic signs, ACC and its supposed to be assistance plus package but I understand this package might be different between markets. I have heated steering wheel as well and I think also the touch version of it as it ask me to take over steering when not holding it. My car also has Matrix lights. I asked why the Travel Assist wasn´t activated on the car upon collection but the dealership said that they haven´t activated it in our market area. Why I have no idea. I have seen cars imported here from other regions that have TA activated so I haven´t got a clue why we cant get it here.
My A5 code is as follows : 00-08-30-6E-1D-D1-08-E0-07-24-30-00-00-....
Any help on the 6E,1D,D1,07 what those means and also to confirm the change I have to make. I'm running car software 3.1 and I have Ultimate OBDeleven gen 2
Many thanks in advance from ICELAND.
|
|
|
Post by taiseer999 on Jul 11, 2023 7:31:16 GMT
I get Travel Assist not available no matter what I do in my ID 4 x
|
|
|
Post by salah7779 on Jul 29, 2023 22:33:58 GMT
You need to change the steering wheel. Ya i have ID4 cross pure pluse and i solved the issue by using a kit installing inside the steering wheel and changing the settings of A5 and it’s working without handling of the steering wheel
|
|