Post by fippy on Sept 25, 2021 20:48:52 GMT
Hi, I’ve recently purchased OBDEleven next gen. I have plugged it into my VW T5, downloaded the app and ran a scan. (I’ve added the log below) I initially purchased just clear a fault showing on the dashboard relating to the airbag light. (This came on after I repaired a reverse light switch, having unplugged a couple of fuses, so I’m pretty sure it just needs clearing rather than any actual problem with the airbags…)
Anyway, as a newbie is my first step simply to clear all faults and then run a scan again or wait for intermittent faults to appear again?
Thanks in advance for any help!
OBDeleven vehicle history log
Date: 2021-09-25 21:44:05
VIN: Xxxxxxxx
Car:
Year: 2006
Body type: UNKNOWN
Engine: kW ( hp) l
Mileage: 175170 km
---------------------------------------------------------------
Full scan
Control Units: 8
Fault count: 11
Control Units:
03 Brakes
Faults:
No trouble codes found
17 Dashboard
System description: KOMBI+WEGFAHRSP VDO V02
Software number: 7H0920951M
Faults:
No trouble codes found
19 Gateway
System description: Gateway K<->CAN 0001
Software number: 6N0909901
Faults:
No trouble codes found
25 Immobilizer
System description: e 17 eingeben
Software number: Bitte Adress
Faults:
No trouble codes found
46 Comfort System
System description: 2L Komfortgerát 0004
Software number: 7H0959433B C
Faults:
No trouble codes found
01 Engine
Faults:
P032100 - Ign./Distributor Eng.Speed Inp.Circ.
Range/Performance
Intermittent
P157000 - Engine Control Module (ECM) disabled
Intermittent
P165000 - Databus drivetrain
missing message from instrument cluster
Intermittent
P163700 - Databus drivetrain
missing message f.central electr.control
Intermittent
15 Airbag
System description: 3B AIRBAG VW51 0009
Software number: 1C0909605A
Faults:
01317 - Instrument cluster control module
Intermittent
09 Central Electrics
System description: BORDNETZ SGVER 1.0
Software number: 7H0937049T
Software version: 2001
Faults:
01598 - Drive battery voltage
static
01117 - Load signal for alternator terminal DF
static
00967 - Left turn signal lights
Intermittent
01598 - Drive battery voltage
Intermittent
00967 - Left turn signal lights
Intermittent
01341 - Control module in instrument cluster at comfort CAN
Intermittent
Anyway, as a newbie is my first step simply to clear all faults and then run a scan again or wait for intermittent faults to appear again?
Thanks in advance for any help!
OBDeleven vehicle history log
Date: 2021-09-25 21:44:05
VIN: Xxxxxxxx
Car:
Year: 2006
Body type: UNKNOWN
Engine: kW ( hp) l
Mileage: 175170 km
---------------------------------------------------------------
Full scan
Control Units: 8
Fault count: 11
Control Units:
03 Brakes
Faults:
No trouble codes found
17 Dashboard
System description: KOMBI+WEGFAHRSP VDO V02
Software number: 7H0920951M
Faults:
No trouble codes found
19 Gateway
System description: Gateway K<->CAN 0001
Software number: 6N0909901
Faults:
No trouble codes found
25 Immobilizer
System description: e 17 eingeben
Software number: Bitte Adress
Faults:
No trouble codes found
46 Comfort System
System description: 2L Komfortgerát 0004
Software number: 7H0959433B C
Faults:
No trouble codes found
01 Engine
Faults:
P032100 - Ign./Distributor Eng.Speed Inp.Circ.
Range/Performance
Intermittent
P157000 - Engine Control Module (ECM) disabled
Intermittent
P165000 - Databus drivetrain
missing message from instrument cluster
Intermittent
P163700 - Databus drivetrain
missing message f.central electr.control
Intermittent
15 Airbag
System description: 3B AIRBAG VW51 0009
Software number: 1C0909605A
Faults:
01317 - Instrument cluster control module
Intermittent
09 Central Electrics
System description: BORDNETZ SGVER 1.0
Software number: 7H0937049T
Software version: 2001
Faults:
01598 - Drive battery voltage
static
01117 - Load signal for alternator terminal DF
static
00967 - Left turn signal lights
Intermittent
01598 - Drive battery voltage
Intermittent
00967 - Left turn signal lights
Intermittent
01341 - Control module in instrument cluster at comfort CAN
Intermittent