|
|
Post by jules413 on Aug 31, 2021 7:09:47 GMT
Hello everybody.
I am looking for the long coding, to activate the rear speakers? |
|
vzinic
Closed beta tester
Posts: 9
|
Post by vzinic on Nov 19, 2021 13:39:15 GMT
Hello,
can anyone find it long coding to activate the rear speakers on ID3?
|
|
ID.3
Full Member
Posts: 210
|
Post by ID.3 on Nov 19, 2021 17:41:23 GMT
I don't know, but this topic interests me a lot!
Hope someone can find a solution here?
In addition the problem is, in my opinion, it is necessary to have already installed the speaker on the MIB 3 to find the right menu or coded
|
|
|
|
Post by mencey on Nov 23, 2021 20:18:17 GMT
It cannot encode the rear speakers because the speakers and cables are not installed. I don't know the coding either. There is a cable, horn and dongle kit with coding at Kufatec.com
|
|
ID.3
Full Member
Posts: 210
|
Post by ID.3 on Nov 23, 2021 20:45:51 GMT
Thank you for your response, I know the solution provided by Kufatec.com, except that the installation is not plug & play, you have to find a partner with GEKO access. I can't find anyone in France to find out who has GEKO access here.
As I said it is necessary that the speakers are at least connected to the MIB to start to find a solution.
But if you have the documentation that would help us maybe to find what to modify it would have been better
|
|
|
|
Post by rillesvanbergs on Jan 19, 2022 21:03:42 GMT
I have retrofitted the rear speakers. Added Channel 1 & 4 that was missing. But no sound from them. In fader i still cant turn it to the back.
Checked coding with an id4 that had speakers. It has the same codes in 8125.
Anyone made it?
|
|
ID.3
Full Member
Posts: 210
|
Post by ID.3 on Jan 20, 2022 11:17:22 GMT
No, I don't think so yet, have you checked to see if the fader function is activated in one of the menus?
|
|
ID.3
Full Member
Posts: 210
|
Post by ID.3 on Jan 28, 2022 8:28:01 GMT
I have retrofitted the rear speakers. Added Channel 1 & 4 that was missing. But no sound from them. In fader i still cant turn it to the back. Checked coding with an id4 that had speakers. It has the same codes in 8125. Anyone made it? Did you manage to find the solution? |
|
|
|
Post by anotheruser on Feb 6, 2022 11:45:19 GMT
No answer yet, but some clues
In module 3 (infotainment)-Function configuration Audio- channel 1 HT- set to installed
repeat for channel 1 TT, channel 4 HT, channel 4 TT
This generated new errors
error-rear right treble speaker - open circuit (channel 1)
error-rear left treble speaker - open circuit (channel 4)
installing the other 20 channels did not generate any other errors.
I'm a little confused by the error as I have a speaker simulator wired in to the rear channels.
For many other VWs module 5F (multimedia) is where speakers are set in byte 4
3C -> 2 channels, 4 speakers.
BE -> 4 channels, 6 speakers.
FF -> 4 channels, 8 speakers.
but mine is set to 00 by default - maybe it isn't used.
I also found in "module 3 (infotainment)-audio zone configuration" zones 3 & 4 can be set to "back row" and left/right.
|
|
|
|
Post by mencey on Feb 7, 2022 17:07:42 GMT
Search for 19 in the gateway everything goes through eye modulo
|
|
|
|
Post by rillesvanberg on Feb 21, 2022 15:06:02 GMT
Sorry for long replytime.
The fader is activated when you activate the Channel 1 & 4 TT.
The hood needs to be open when you do the coding.
Nothing else has to be adapted.
|
|
ID.3
Full Member
Posts: 210
|
Post by ID.3 on Feb 21, 2022 17:31:18 GMT
Hi and really thank you very much for this ultimate info!  really it would be great if you could write us the full path for the coding? Open the front cover --> Unit 8125 --> Settings --> Function configuration Audio --> --- ? ---> --?--
I think I understand but I would really like to be sure, some coding before I do it in the car, please
|
|
|
|
Post by mencey on Feb 21, 2022 20:34:33 GMT
Yes, it would be great if you could put the complete coding in clean, gracias
|
|
|
|
Post by mencey on Feb 23, 2022 12:09:35 GMT
|
|
papad
New Member
Posts: 13
|
Post by papad on Mar 5, 2022 15:48:33 GMT
Sorry for long replytime. The fader is activated when you activate the Channel 1 & 4 TT. The hood needs to be open when you do the coding. Nothing else has to be adapted. Could you please walk us through how you activate what? I really do not understand what to do. This is the only page I find regarding speakers. No "TT" or "HT" mentioned in this thread. "Anpassning" is swedish for adaption.
 |
|
|
|
Post by rillesvanberg on Apr 11, 2022 7:33:47 GMT
Adaptations 8125
Function_configuration_audio
Channel 4 TT activate
Channel 1 TT activate
HT is high tone and should be Inactive on CH 1 and 4.
|
|
|
|
Post by mencey on Apr 11, 2022 16:14:47 GMT
Does anyone have information on the connection of the speaker cables to ICAS ?
|
|
|
|
Post by mrloni on Apr 12, 2022 18:53:52 GMT
Adaptations 8125 Function_configuration_audio Channel 4 TT activate Channel 1 TT activate HT is high tone and should be Inactive on CH 1 and 4. I have activated these 2 channels and still the fader is not active, are you sure this is the only thing to do? |
|
ID.3
Full Member
Posts: 210
|
Post by ID.3 on Apr 13, 2022 5:51:15 GMT
Does anyone have information on the connection of the speaker cables to ICAS ? For example, by buying the kit for the rear speakers from Kufatec: HEREYou will have the complete instructions for installing the cables in the car. I have what you are asking for at home but it is a private document, which I have no right to share (there is my name and my address in watermark on all the pages) |
|
|
|
Post by mencey on Apr 13, 2022 21:22:45 GMT
Could you make a drawing or sketch?
|
|
ID.3
Full Member
Posts: 210
|
Post by ID.3 on Apr 15, 2022 19:37:01 GMT
I sent this to you by private message. hoping that's what you wanted ?
|
|
|
|
Post by mencey on Apr 16, 2022 11:29:21 GMT
Ok thank you very much !
|
|
ID.3
Full Member
Posts: 210
|
Post by ID.3 on Apr 16, 2022 18:08:20 GMT
Do you let us know if it works well for you?
|
|
|
|
Post by mencey on Apr 19, 2022 10:30:06 GMT
I'm not going to do it yet, probably in the summer months, thank you.
|
|
|
|
Post by rillesvanberg on Jul 15, 2022 17:07:04 GMT
Sorry for Long reply time…
But i figured it out.
8125
Function_configuration_audio
Channel 1 TT Activate
Channel 4 TT Activate
Signal_Flow_topology from 15 to 25
That is the trick.
Hood Open during all coding.
After coding hold powerbutton on screen to restart system.
Then everything is Ok.
|
|
|
|
Post by audidave on Aug 23, 2022 21:46:51 GMT
Just fitted rear speakers to my Cupra born and used the above coding, speakers working but the fader is not working or showing on display.
|
|
|
|
Post by audidave on Aug 24, 2022 5:17:27 GMT
Does anyone know what the significance of changing the signal flow ?
|
|
|
|
Post by AlBundy on Sept 19, 2022 7:44:28 GMT
rillesvanbergDid you manage to install and activate the rear speakers? What are the correct codes for the speakers ? 11A035710 or 10A035710 Thanx
|
|
|
|
Post by audidave on Sept 19, 2022 8:18:31 GMT
Still trying to work this out, I fitted focal speakers with separate tweeters so channels 1 & 4 I activated HT, also on the Cupra born I found out that topology needs to be set to “0” and not 25
But I have a missing data when I apply anything other than 15.
Also the EQ screen has 5 channels and it only works on 3 but it sounds fantastic 😆
Just need to try find what we’re missing on the born to finish this off.
|
|
|
|
Post by AlBundy on Sept 19, 2022 9:06:40 GMT
I have activated channels 1 and 4 Ht, and topology from 15 to 25 but I have an implausible data set error.
Does anyone from the factory have speakers on the back, but not with a sound system, to put all the channels from the adaptations for us?
ENG253302-ENG260724-audio_zone_configuration-zone_1_direction Left
ENG253302-ENG259844-audio_zone_configuration-zone_1_position front_row
ENG253302-ENG260273-audio_zone_configuration-zone_2_direction Right
ENG253302-ENG259809-audio_zone_configuration-zone_2_position front_row
ENG253302-ENG261136-audio_zone_configuration-zone_3_direction none
ENG253302-ENG260623-audio_zone_configuration-zone_3_position none
ENG253302-ENG259382-audio_zone_configuration-zone_4_direction none
ENG253302-ENG259681-audio_zone_configuration-zone_4_position none
I think something needs to be changed here !!
|
|
really it would be great if you could write us the full path for the coding?
