|
Post by chowder on Jun 29, 2021 12:10:19 GMT
Hi, installed TSR Then uninstalled because it was in KPH not MPH, didn’t realise that you had to use credits to uninstall but one for later!! Any advice on how to change to MPH please and also what signs does it pick up? Thanks
|
|
|
Post by peeptheduck on Aug 13, 2021 7:17:23 GMT
Also need help with this! After activating it, and then about 30 seconds of driving, it then says “Dynamic Road Sign Display currently restricted”. Argh!! I only really bought the OBD11 to get this and trailer assist, which I also can’t get to work.
Am close to sending it back and complaining for a refund - it just doesn’t work properly!!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 13, 2021 8:48:39 GMT
If you are having issues with one click apps please contact support directly via the in app help function.
They will be able to assist and if required fix any bugs.
All I would add is you need to have the right hardware installed for this to work without errors and you must follow the installation instructions on the app.
|
|
|
Post by peteruk on Nov 9, 2023 18:47:39 GMT
I rarely get the “Dynamic Road Sign Display currently restricted”, but it only lasts a few secs. I only get sign recognition in KPH but this highlights any speed limit signs that I may have missed while texting! I see this as a positive. Shame I can't watch videos on the move through the infotainment system, too. Just as well that the Tarraco has lots of air bags.
|
|
|
Post by sprucepassatb8 on Feb 14, 2024 12:21:23 GMT
Both of u did it with apps? I got the adaption instruction here; idk if anything is different from the app version. Personally i dont use apps; u never know what this app does!
-> STG 5F --> Login?! ---> Adaption
----> Car_function_list_BAP_Gen2 -----> traffic_sign_recognition_0x21 from "not active" to "active"
------> Car_function_adaptions_Gen2-menue -------> menu_display_road_sign_identification from "not active" to "active" -------> menu_display_road_sign_identification_over_threshold_high from "not active" to "active"
--------> Coding --------->activate in Byte 24 Bit 6
-> STG 5A --> Coding ---> activate in Byte 16 Bit 4
-> STG 17 --> Coding ---> acitvate in Byte 5 Bit 2
additionally it can show up at your HUD -> STG 82 --> Coding ---> activate in Byte 0 Bit 0
Failure in ACC STG after Coding? -> STG 13 --> Login: 20103 ---> Coding ----> activate in Byte 1 Bit 0
|
|
|
Post by shaunr on Feb 24, 2024 16:06:05 GMT
I've also logged a support request for this app. Currently getting the 'Dynamic Road Sign Display currently restricted' message and doesn't seem to work. I've also taken a full backup and reviewed the adaptation instructions above and it's all the same apart from the ACC STG group bit being active (but then i don't get any failure message for this). I'm in the UK also if that's relevant. Grateful for any help, thanks Shaun.
|
|
|
Post by sprucepassatb8 on Mar 6, 2024 7:27:52 GMT
shaunr : Control unit A5 (front / advance camera) Adaptation Road Sign Detection Fusion Mode Change to ‘Road Sign Detection’ Reboot Infotainment U can also try to move the car to another spot. It could be it needs to see some RoadSign. Read some forums and some guys had problems with there maps on SD-Card -> it has a database failure and should work with older map version.
|
|