|
Post by ramazan on Jun 14, 2021 17:49:17 GMT
Hi all,
I'm nee to this beautifull forum and need your help. I use the pre-app illuminate turn blinker whe hatch is open. But i didn't like it so reversed this function. After this my blinker didn't worked at all but i managed to let it blink. Before all this happend the indicators were dybnamic when locking and unlocking the car. Now it's only static blinking. Does anyone know what i have to code in order to get it back dynamic. I'm searching now for a month but can't find anything.
|
|
|
Post by ghostrider on Jun 15, 2021 13:09:47 GMT
I have the same problem Symbol „Von der Community überprüft“ Überprüft
|
|
|
Post by ramazan on Jun 17, 2021 5:03:58 GMT
If anyone has an euro spec Arteon without any changes to the rear lights i'm also happy with a full scan of that car so i can compare it with my scan.
|
|
|
Post by arteon on Jun 19, 2021 15:45:18 GMT
Hi Ramazan, I had the same. I resolved my issue with with the help of this topic: forum.obdeleven.com/thread/12414/third-brake-light-indicatorsYou should change the following adaption in the 09 module: Aussenlicht_Blinker ZV Blinken zu active ZV Blinken auf active Warnblinken Zuendung EIN active Warnblinken Zuendung AUS active All four need to be active. I had the same problem. All these application really messed up my setting, also my headlight we not functioning correctly, I needed I can make a backup of my European car and share it with you.
|
|
|
Post by ghostrider on Jun 26, 2021 16:46:06 GMT
I did the whole thing now it flashes dynamically only the problem is when I press the brake and it does not flash dynamically but normally
|
|
|
Post by ramazan on Jun 27, 2021 9:56:36 GMT
Hi Ramazan, I had the same. I resolved my issue with with the help of this topic: forum.obdeleven.com/thread/12414/third-brake-light-indicatorsYou should change the following adaption in the 09 module: Aussenlicht_Blinker ZV Blinken zu active ZV Blinken auf active Warnblinken Zuendung EIN active Warnblinken Zuendung AUS active All four need to be active. I had the same problem. All these application really messed up my setting, also my headlight we not functioning correctly, I needed I can make a backup of my European car and share it with you. Hi mate. Thanks a lot for sharing. I will tey it. Just for the record after these mods the blinkers were dynamic again when locking and unlocking the doors right?
|
|
|
Post by ramazan on Jun 27, 2021 9:58:32 GMT
I did the whole thing now it flashes dynamically only the problem is when I press the brake and it does not flash dynamically but normally I will check the mod above. If that solvea my issue i will make ascan of module centr. Elect. 9 so you can compare it with your settings. Mine is all good except static blinker when lock and unlock the door. Normal turn light is dynamic so no there.
|
|
|
Post by ramazan on Jun 27, 2021 10:03:32 GMT
I did the whole thing now it flashes dynamically only the problem is when I press the brake and it does not flash dynamically but normally Checked the setting in offline mode and all 4 are active. I will hook the dongle to the car and hust set all 4 on de-active and then active again.
|
|
|
Post by ramazan on Jul 3, 2021 17:19:10 GMT
Hi Ramazan, I had the same. I resolved my issue with with the help of this topic: forum.obdeleven.com/thread/12414/third-brake-light-indicatorsYou should change the following adaption in the 09 module: Aussenlicht_Blinker ZV Blinken zu active ZV Blinken auf active Warnblinken Zuendung EIN active Warnblinken Zuendung AUS active All four need to be active. I had the same problem. All these application really messed up my setting, also my headlight we not functioning correctly, I needed I can make a backup of my European car and share it with you. I mate i can't thank you enough. I fixed my blinker issue. ZV Blinken zu active ZV Blinken auf active These 2 were inactive. After putting it to active the blinker were dynamic again. Now everything is as i want. I made a full backup of the car. So if you need any info just let me know.
|
|