Garko
Full Member
Just for Fun
Posts: 125
|
Post by Garko on Jun 11, 2021 0:54:13 GMT
After Long Coding module 4B Basic Settings is required (Calibration) IQ Lights LED I did few times with no problems on the Real Calibration, but this time Car lights are pointing to the floor. Is 2 options Factory Settings and customer Settings. And after that Calibrate or not Calibrate. Looking to fix it, I tryed all and do not works  Do someone know how to fix that?  Thanks |
|
Garko
Full Member
Just for Fun
Posts: 125
|
Post by Garko on Jun 11, 2021 21:45:50 GMT
Solved.
With no errors in module I removed from the list of the Gateway.
I moved back on the Obdeleven screen , and then move forward again.
This way Gateway ask have detected modules and if you want to install.
Press yes. It did it, I clear faults in the module and Run basic sattings again.
My lights was on position again.
|
|
|
|
Post by juniorta on Nov 29, 2021 21:02:21 GMT
Solved. With no errors in module I removed from the list of the Gateway. I moved back on the Obdeleven screen , and then move forward again. This way Gateway ask have detected modules and if you want to install. Press yes. It did it, I clear faults in the module and Run basic sattings again. My lights was on position again. Hi, Can you explain more how did you manage to do the basic settings. I need to change my 4B but afraid that i can’t make the basic setting works. In iq light you need to use a special machine to calibrate the lights. If you can add screenshots it will be helpful. Thanks |
|
