joe99
New Member
Posts: 7
|
Post by joe99 on May 31, 2021 15:51:09 GMT
My car is a 2015 Audi Q5 TDI Ultra. Several months ago I deactivated the seat belt warning with my Odbeleven app. I'm trying to reactivate the warning but when applying the activation (EU) I don't see that the sound or the dashboard warning works. Could someone help me. Thank you
|
|
|
|
Post by stepet68 on May 31, 2021 17:18:33 GMT
You should be able to check the history in the app and reverse the settings.
|
|
joe99
New Member
Posts: 7
|
Post by joe99 on Jun 1, 2021 13:55:22 GMT
Yes but I don't know how to reverse the changes from history. Can you help me?
|
|
|
|
Post by stepet68 on Jun 2, 2021 8:49:05 GMT
In the history there should be Old value and New value under Adaptation and/or Long coding. Can you see something like that?    |
|
joe99
New Member
Posts: 7
|
Post by joe99 on Jun 3, 2021 5:56:21 GMT
|
|
|
|
Post by stepet68 on Jun 3, 2021 13:24:27 GMT
Ok. So the actual changes do not show up in the history. Did you do a backup before you ran the app? Otherwise I do not know how to find out what changes were made.
|
|
joe99
New Member
Posts: 7
|
Post by joe99 on Jun 3, 2021 20:10:51 GMT
Unfortunately I did not make a backup. Anyway, thank you very much for your comments.
|
|
joe99
New Member
Posts: 7
|
Post by joe99 on Jun 4, 2021 8:09:07 GMT
SOLVED. From "Dashboard" section (17), long coding, byte 00, bit 2 active, bit 3 disable, bit 4 disable.
|
|
